多氯联苯管理体系探讨

多氯联苯属于《斯德哥尔摩公约》首批需要控制和消减的持久性有机污染物,在国内主要用于电力设备的绝缘油。中国的多氯联苯污染形态主要有含多氯联苯的设备以及受多氯联苯污染的土壤。针对中国目前存在的多氯联苯污染,分析了其特点,从法律、法规以及标准等方面介绍了多氯联苯污染控制的相关政策法规和管理现状,同发达国家多氯联苯污染管理体系进行比较,对中国多氯联苯污染管理不足提出相应的具体管理政策建议,主要包括管理方面持久性有机污染物技术规范方面和环境经济方面。     

新时期城市安全风险防控实践探析——以成都为例

随着我国加快从"乡村社会"迈向"城市社会",城市安全问题成为了新时期亟待解答的"国家命题",分析了城市化与城市风险相关问题,提出了适合成都的安全风险预防指标体系,并以"技术防控"开发建设城市安全监测预警系统,以"标准防控"推动企业和公共领域安全管理标准化,以"群众防控"依托安全社区为载体,构建基层社区公共安全体系,为我国城市安全风险防控体系建设提供了宝贵经验和有益启示。     

Hydrothermal liquefaction phase behavior of microalgae & model compounds in fused silica capillary reactor

A fused silica capillary reactor combined with a heating/cooling stage, a microscope and a digital camera were used to investigate phase behavior during the hydrothermal liquefaction of microalgae (Dunaliella tertiolecta) and model compounds, including soya protein and glycine, starch, glucose and xylose, stearic acid and palmitic acid. Bubbles were generated at 246°C and disappeared at 360°C upon heating when Dunaliella tertiolecta used as feedstocks. Moreover, liquid products were generated at 300°C upon heating and oily liquid products began to separate out at 250°C upon cooling. The phase behavior of soya protein was similar to that of the Dunaliella tertiolecta. Meanwhile, there only observed the bubbles generation during hydrothermal liquefaction of glycine. Heating the starch, glucose and xylose above 350°C generated black solids from carbonization. Stearic acid and palmitic acid only had the process of melting, dissolution, dispersion and precipitation.     

化学反应危害的识别及预防控制

1 问题的提出 化学反应过程常常由于一些非预期的因素,如进料错误、杂质、反应器过热、冷却系统故障、外部火灾和搅拌失效等,使反应偏离正常操作范围,造成异常放热.若此时无法将所产生的热量迅速移除,则可能导致加速反应,形成自加速放热现象.     

呼伦贝尔草原生态功能区防风固沙功能重要性主要影响因子时空变化特征

以呼伦贝尔草原生态功能区为研究对象,选择了植被覆盖度、地形因子、土壤可蚀性、大风日数和湿润指数作为防风固沙功能重要性的评价指标,综合采用构建专家判断矩阵和层次分析法建立了评价指标体系。利用ETM影像数据和地理信息系统技术对呼伦贝尔草原生态功能区三期(2000—2003年、2004—2007年和2008—2011年)的防风固沙功能重要性进行了评价,并分析了各单因子重要性和综合重要性的动态变化和空间分布格局。结果表明,植被覆盖度是影响防风固沙功能重要性的关键因子。2000—2011年,呼伦贝尔草原生态功能区的防风固沙功能重要性呈先升高后降低的趋势;空间分布由东向西逐渐升高,沙带地区防风固沙功能重要性较高,温性草甸草原区和温性草原区防风固沙功能重要性较低。     

Carbonyl emissions from vehicular exhausts sources in Hong Kong

Vehicular emission (VE) is one of the important anthropogenic sources for airborne carbonyls in urban area. Six types of VE-dominated samples were collected at representative locations in Hong Kong where polluted by a particular fueled type of vehicles, including (i) a gas refilling taxis station (liquefied petroleum gas [LPG] emission); (ii) a light-duty passenger car park (gasoline emission); (iii) a minibus station (diesel emission); (iv) a single-deck-bus depot (diesel emission); (v) a double-deck-bus depot (diesel emission); and (vi) a whole-food market entrance for light- and heavy-duty vehicles (diesel emission). A total of 15 carbonyls in the samples were quantified. Formaldehyde was the most abundant carbonyl among the VE-dominated samples, and its contribution to the total quantified amount on a molar basis ranged from 54.8% to 60.8%. Acetaldehyde and acetone were the next two abundant carbonyls. The carbonyls were quantified at three roadside locations in Hong Kong. The highest concentrations of formaldehyde and acetaldehyde, 22.7 +/- 8.4 and 6.0 +/- 2.8 microg/m3, respectively, were determined in the samples collected at a main transportation gate for goods between Hong Kong and Mainland China. The total quantified carbonyl concentration, 37.9 +/- 9.3 microg/m3, was the highest at an entrance of a cross-harbor tunnel in downtown area. The theoretical carbonyls compositions of the three roadside locations were estimated according to the VE-dominated sample profiles and the statistics on vehicle numbers and types during the sampling period. The measured compositions of formaldehyde were much higher than the theoretical compositions in summer, demonstrating that photochemical reactions significantly contributed to the formaldehyde production in the roadsides.     

面向实时人群动力学分析的深度基本图网络

当前行人疏散实验中基本图计算方法通常是通过对每个行人进行跟踪实现的.但这种跟踪方法难以实现实时人群动力学分析.针对这一问题,提出了深度基本图网络.实验提出的网络框架由两个模块组成,即多尺度递归卷积神经网络(MSR-Net)和光流模块,分别对行人密度和行人速度进行估计.具体来讲,MSR-Net学习了输入图像与行人密度图之...     

A WATER QUALITY‐BASED APPROACH FOR WATERSHED WIDE BMP STRATEGIES1

ABSTRACT: Watershed management strategies generally involve controlling nonpoint source pollution by implementing various best management practices (BMPs). Currently, stormwater management programs in most states use a performance‐based approach to implement onsite BMPs. This approach fails to link the onsite BMP performance directly to receiving water quality benefits, and it does not take into account the combined treatment effects of all the stormwater management practices within a watershed. To address these issues, this paper proposes a water quality‐based BMP planning approach for effective nonpoint source pollution control at a watershed scale. A coupled modeling system consisting of a watershed model (HSPF) and a receiving water quality model (CE‐QUAL‐W2) was developed to establish the linkage between BMP performance and receiving water quality targets. A Monte Carlo simulation approach was utilized to develop alternative BMP strategies at a watershed level. The developed methodology was applied to the Swift Creek Reservoir watershed in Virginia, and the results show that the proposed approach allows for the development of BMP strategies that lead to full compliance with water quality requirements.     

3种运行模式下CAST工艺脱氮性能

以模拟城市污水为处理对象,采用循环式活性污泥法（CAST）反应器,对3种运行模式（M1：常规模式,M2：缺氧好氧模式、M3：缺氧好氧交替模式）下系统的脱氮性能进行了研究,比较了各模式下CAST反应器的氨氮和总氮的去除效率,并对各模式下典型周期内氮基质浓度变化进行了考察,以确定系统的脱氮模式。结果表明,在氨氮去除不成为限制条件（去除率〉90％）的条件下,3种运行模式下系统总氮的平均去除率分别为67．3％、70．6％和82．4％,以缺氧好氧交替模式下的最高;M1、M2和M3均可实现亚硝酸型硝化,但随着温度的升高,亚硝酸型硝化逐渐消失。静态实验分析表明,3种模式下系统的氨氧化速率大小次序为：vN：M1〉vN：M2〉vN：M3,反硝化速率大小次序为：vDN,M2〉vDN,M3〉vDN,M1。     

含油污泥三相离心分离处理技术研究

针对原油生产过程中产生的大量含油污泥,油泥成分复杂、严重污染周边环境且造成资源浪费的情况,采用三相离心分离工艺对含油污泥进行处理。通过室内试验研究,确定了含油污泥处理的最佳条件。添加分离剂能够改善油泥分离性能,提高油泥温度能够改善油泥流动效果,摸索出油泥离心分离的最佳时间和离心速率,并对分离后的三相物质进行物性检测。该工艺处理含油污泥可以有效的回收原油,处理后固相减量75%,实现含油污泥减量化、资源化处理的目的。