南昌市冬季大气PM2.5中重金属元素来源分析及健康风险评价

采集2015年南昌市冬季大气PM_(2.5)样品,利用电感耦合等离子体质谱仪(ICP-MS)测定样品中重金属(V、Mn、Cr、Co、Ni、Cu、Zn、Cd、Ba和Pb)的含量,分析重金属的分布特征和来源,并对重金属健康风险进行评价。结果表明:采样期间PM2.5浓度总平均值为(29.74±16.82)μg/m~3,其中省外办最高,武术学校最低;各重金属元素总体平均浓度从高到低次序为:ZnPbCuMnBaNiVCrCdCo。因子分析结果表明:PM_(2.5)中重金属元素的来源包括道路交通尘和冶金化工排放、机动车尾气以及混合源。健康风险评价结果显示:PM_(2.5)中Mn对人体健康存在非致癌风险,其他元素(Cr、Ba、Co、Pb、Cd、Cu、V、Zn、Ni)基本没有非致癌风险;Cr对人体有较明显的致癌风险,Cd、Ni和Co对部分年龄段的人群(尤其是成年人)存在一定的致癌风险。     

小流域综合治理新设计研究——猪沼果模式

近年来,小流域综合治理的主旨思想改变了,其工作重心在于巩固和发展治理开发的成果,提升综合治理的科技含量,增加治理带来的经济效益。于是将小流域的治理与生产联系起来成为了当前科研人员的研究方向。文章对目前部分地区大力推广的"猪-沼-果"模式在小流域治理方面的概念、发展及综合效益等方面做了一些综述。总的来说,猪沼果模式能够增加农村的能源,增加农民收入,并保护绿植,促进小流域治理。     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。     

环保宣教影视作品制作中生态环保意识分析研究

传统环保宣教影视作品内容过于空泛,难以引起人们共鸣,近年来环境问题逐渐严重,带来一系列自然灾害,为人民生命财产带来巨大损失。影视作品能够起到传播观念和导向舆论的作用,将生态环保意识引入影视作品可以引发人们的思考。对环保宣教影视作品中生态环保意识进行分析,探讨了生态环保意识的建立过程以及融入过程,通过实验研究了环保宣教影视作品中引入生态环保意识对环境保护起到的作用。实验结果表明,引入生态环保意识的环保宣教影视作品能够更好地向社会大众宣传环保好处,更好地促进环境保护工程的实施。     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

锌、铝的激光-时间分辨荧光测定

本文报道了以７碘８羟基喹啉５磺酸作荧光增强剂的Ｚｎ、Ａｌ激光时间分辨荧光测定方法。方法检出限分别为２５μｇ／Ｌ和１０μｇ／Ｌ。用牛肝粉标准品（ＮＢＳ１５７７ａ）进行了验证     

Mathematical balance models for monitoring the state of Lake Baikal

The global cycles of man-produced pollutants entering the natural environment are reflected in changes of pollutant cycles, even in background regions.The system of mathematical balance simulation models of inorganic pollutant distribution and circulation (some heavy metals and pesticides included in the priority list for integrated background monitoring) has been developed for the Lake Baikal drainage basin. The system consists of the following units: (1) inventory and classification of regional sources of pollutants entering the atmosphere, natural waters and soils; (2) computation of the global atmospheric transfer and depositions; (3) regional spreading with atmospheric fluxes and deposition onto the underlying surfaces; (4) transport with waterflows feeding Lake Baikal; (5) transport with the lake currents and balance in the lake.The models developed have enabled improvement of existing programmes and systems of observations, in particular to substantiate the large-scale snow sampling and analysis network, and to develop the programme of integrated surveys of the state of Lake Baikal. Since 1981 these actions have been included in the operational network observations within the Lake Baikal Monitoring System.     

土壤重金属污染的灰色模糊评价

以灰色聚类为基础，提出了灰色模糊聚类分析法，并将其应用于土壤环境质量评价中，经实例分析表明，这是一种较为简便，合理、有效的评价方法。     

Climate impact on social systems: the risk assessment approach

A novel approach to the problem of estimating climate impact on social systems is suggested. This approach is based on a risk concept, where the notion of critical events is introduced and the probability of such events is estimated. The estimation considers both the inherent stochasticity of climatic processes and the artificial stochasticity of climate predictions due to scientific uncertainties. The method is worked out in some detail for the regional problem of crop production and the risks associated with global climate change, and illustrated by a case study (Kursk region of the FSU). In order to get local climatic characteristics (weather), a so-called statistical weather generator is used. One interesting finding is that the 3% risk level remains constant up to 1.0–1.1°C rise of mean seasonal temperature, if the variance does not change. On the other hand, the risk grows rapidly with increasing variance (even if the mean temperature rises very slowly). The risk approach is able to separate two problems: (i) assessment of global change impact, and (ii) decision making. The main task for the scientific community is to provide the politicians with different options; the choice of admissible (from the social point of view) critical events and the corresponding risk levels is the business of decision makers.