Formulas of components of citronella oil against mosquitoes (Aedes aegypti)

The mosquito Aedes aegypti is an epidemic vector of several diseases such as dengue fever and yellow fever. Several pesticides are used to control the mosquito population. Because of their frequent use, some mosquitoes have developed resistance. In this study, we used the Y-tube olfactometer to test essential oils of Cymbopogon species and screened specific formulas of components as repellents against Ae. aegypti. At 400 μL, the extracted oil of citronella grass (Cymbopogon nardus) and myrcene produced a low-active response by inhibiting mosquito host-seeking activity. Citronella grass, lemon grass (Cymbopogon citratus), citral and myrcene also produced a low-treatment response to repellents, for more potential to affect host-seeking behavior. Furthermore, the mixture of citral, myrcene, and citronellal oil (C:M:Ci = 6:4:1) greatly affected and inhibited host-seeking behavior (76% active response; 26% treatment response with 40 μL; 42.5%, 18% with 400 μL; and 19%, 23% with 1000 μL). As compared with the result for N,N-diethyl-3-methylbenzamide (DEET; 44%, 22% with 400 μL), adjusting the composition formulas of citronella oil had a synergistic effect, for more effective repellent against Ae. aegypti.     

Spatio-Temporal Variability of Soil Respiration of Forest Ecosystems in China: Influencing Factors and Evaluation Model

Understanding the influencing factors of the spatio-temporal variability of soil respiration (R _s) across different ecosystems as well as the evaluation model of R _s is critical to the accurate prediction of future changes in carbon exchange between ecosystems and the atmosphere. R _s data from 50 different forest ecosystems in China were summarized and the influences of environmental variables on the spatio-temporal variability of R _s were analyzed. The results showed that both the mean annual air temperature and precipitation were weakly correlated with annual R _s, but strongly with soil carbon turnover rate. R _s at a reference temperature of 0°C was only significantly and positively correlated with soil organic carbon (SOC) density at a depth of 20 cm. We tested a global-scale R _s model which predicted monthly mean R _s (R _s,monthly) from air temperature and precipitation. Both the original model and the reparameterized model poorly explained the monthly variability of R _s and failed to capture the inter-site variability of R _s. However, the residual of R _s,monthly was strongly correlated with SOC density. Thus, a modified empirical model (TPS model) was proposed, which included SOC density as an additional predictor of R _s. The TPS model explained monthly and inter-site variability of R _s for 56% and 25%, respectively. Moreover, the simulated annual R _s of TPS model was significantly correlated with the measured value. The TPS model driven by three variables easy to be obtained provides a new tool for R _s prediction, although a site-specific calibration is needed for using at a different region.     

Persulfate oxidation of trichloroethylene with and without iron activation in porous media

In situ chemical oxidation with persulfate anion (S2O82*) is a viable technique for remediation of groundwater contaminants such as trichloroethylene (TCE). An accelerated reaction using S2O82* to destroy TCE can be achieved via chemical activation with ferrous ion to generate sulfate radicals (SO4*)(E degrees =2.6 V). The column study presented here simulates persulfate oxidation of TCE in porous media (glass beads and a sandy soil). Initial experiments were conducted to investigate persulfate transport in the absence of TCE in the column. The persulfate flushing exhibited a longer residence time and revealed a moderate persulfate interaction with soils. In TCE treatment experiments, the results indicate that the water or persulfate solution would push dissolved TCE from the column. Therefore, the effluent TCE concentration gradually increased to a maximum when about one pore volume was replaced with the flushing solution in the column. The presence of Fe2+ concentration within the column caused a quick drop in effluent TCE concentration and more TCE degradation was observed. When a TCE solution was flushing through the soil column, breakthrough of TCE concentration in the effluent was relatively slow. In contrast, when the soil column was flushed with a mixed solution of persulfate and TCE, persulfate appeared to preferentially oxidize soil oxidizable matter rather than TCE during transport. Hence, persulfate oxidation of soil organics may possibly reduce the interaction between TCE and soil (e.g., adsorption) and facilitate the transport of TCE through soil columns resulting in faster breakthrough.     

Effects of fungicides triadimefon and propiconazole on soil bacterial communities

The impact of fungicides triadimefon and propiconazole on soil bacterial populations from a strawberry field was investigated. Two fungicides were applied to the soil at concentrations of 10 mg/kg or 100 mg/kg with soil water contents 20.2% (fresh soil water content) or 26.0% (field capacity). Changes in bacterial communities were assessed using DNA extraction, polymerase chain reaction (PCR) amplification of the 16S rDNA and denaturing gradient gel electrophoresis (DGGE). High performance liquid chromatography (HPLC) was utilized to detect the residue of fungicides in soils. The results showed that propiconazole was more persistent than triadimefon in soils, and the two soil water contents did not cause significant differences in dissipation rates between the two fungicides. A high concentration of propiconazole could inhibit the existence of soil microbes while one of triadimefon might induce the microbial population in the first stage. From unweighted pair-group method using arithmetic averages (UPGMA) dendrograms, the effect of triadimefon and propiconazole at the two applied concentrations on a soil bacterial community could be long term. After triadimefon was applied for 60 days and propiconazole for 75 days, the compositions of microbial communities were not recovered. From the viewpoint of environmental protection, it was of significant importance to pay more attention not only to the residues of pesticide but also to the change in soil microbial communities.     

Kinetics of inorganic carbon utilization by microalgal biofilm in a flat plate photoreactor

A kinetic model was developed to describe inorganic carbon utilization by microalgae biofilm in a flat plate photoreactor. The model incorporates the fundamental mechanisms of diffusive mass transport and biological reaction of inorganic carbon by microalgal biofilm. An advanced numerical technique, the orthogonal collocation method and Gear's method, was employed to solve this kinetic model. The model solutions included the concentration profiles of inorganic carbon in the microalgal biofilm, the growths of suspended microalgae and microalgal biofilm, the effluent concentrations of inorganic carbon, and the flux of inorganic carbon from bulk liquid into biofilm. The batch kinetic test was independently conducted to determine biokinetic parameters used in the microalgal biofilm model simulation while initial thickness of microalgal biofilm were assumed. A laboratory-scale flat plate photoreactor with a high recycle flow rate was setup and conducted to verify the model. The volume of photoreactor is 60 l which yields a hydraulic retention time of 1.67 days. The model-generated inorganic carbon and the suspended microalgae concentration curves agreed well with those obtained in the laboratory-scale test. The fixation efficiencies of HCO(3)(-) and CO(2) are 98.5% and 90% at a steady-state condition, respectively. The concentration of suspended microalgal cell reached up to 12 mg/l at a maximum growth rate while the thickness of microalgal biofilm was estimated to be 104 microm at a steady-state condition. The approaches of experiments and model simulation presented in this study could be employed for the design of a flat plate photoreactor to treat CO(2) by microalgal biofilm in a fossil-fuel power plant.     

Berberine-loaded liquid crystalline nanoparticles inhibit non-small cell lung cancer proliferation and migration in vitro

Environmental Science and Pollution Research - Non-small cell lung cancer (NSCLC) is reported to have a high incidence rate and is one of the most prevalent types of cancer contributing towards 85%...     

Physiological traits associated with a reproductive-resting stage in Coullana canadensis (Copepoda: Harpacticoida)

We investigated physiological traits associated with a reproductive-resting stage in adult female harpacticoid copepods, Coullana canadensis (Willey). Our hypothesis was this stage represents a life-history strategy that could increase fitness by improving winter survivorship and future reproductive success in spring. To test if physiological rates are suppressed in this stage, we compared gut-cell morphology, nitrogen excretion rates, enzyme activities, and phytoplankton grazing rates of reproductive-resting and reproductive females reared in the laboratory under high food conditions. Copepods came from laboratory cultures originating from individuals collected in Maine and Maryland, USA in 1990. Reproductive-resting females had lower physiological rates, and the surface area of gut-cells was reduced compared to reproductive females. Distinct morphological differences in the distribution of lipids between reproductive and reproductive-resting females were observed under light and electron microscopy, the latter having a diffuse accumulation of lipid in the area normally occupied by the ovaries. Differences in lipid composition were also found. Reproductive copepods had a significantly higher ratio (%) of polar lipids to total lipid, and a lower proportion of triacylglycerols compared to reproductive-resting copepods. These laboratory findings are consistent with the hypothesis that the reproductive-resting stage in C. canadensis is an adaptive response to increase winter survival. Received: 29 May 1996 / Accepted: 3 December 1997     

A reasoned approach towards administering COVID-19 vaccines to pregnant women

There are over 50 SARS-CoV-2 candidate vaccines undergoing Phase II and III clinical trials. Several vaccines have been approved by regulatory authorities and rolled out for use in different countries. Due to concerns of potential teratogenicity or adverse effect on maternal physiology, pregnancy has been a specific exclusion criterion for most vaccine trials with only two trials not excluding pregnant women. Thus, other than limited animal studies, gradually emerging development and reproductive toxicity data, and observational data from vaccine registries, there is a paucity of reliable information to guide recommendations for the safe vaccination of pregnant women. Pregnancy is a risk factor for severe COVID-19, especially in women with comorbidities, resulting in increased rates of preterm birth and maternal morbidity. We discuss the major SARS-CoV-2 vaccines, their mechanisms of action, efficacy, safety profile and possible benefits to the maternal-fetal dyad to create a rational approach towards maternal vaccination while anticipating and mitigating vaccine-related complications. Pregnant women with high exposure risks or co-morbidities predisposing to severe COVID-19 infection should be prioritised for vaccination. Those with risk factors for adverse effects should be counselled accordingly. It is essential to support patient autonomy by shared decision-making involving a risk-benefit discussion with the pregnant woman.