Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

A novel sequence batch membrane carbonation photobioreactor developed for microalgae cultivation

A novel SBM-C-PBR was constructed for microalgae cultivation. Membrane fouling was greatly mitigated by membrane carbonation. NH₄⁺ and P removal rates were around 80% in SBM-C-PBR. Biomass was completely retained by membrane. In this study, a novel sequence batch membrane carbonation photobioreactor was developed for microalgae cultivation. Herein, membrane module was endowed functions as microalgae retention and CO₂ carbonation. The results in the batch experiments expressed that the relatively optimal pore size of membranes was 30 nm, photosynthetically active radiation was 36 W/m² and the CO₂ concentration was 10% (v/v). In long-term cultivation, the microalgal concentration separately accumulated up to 1179.0 mg/L and 1296.4 mg/L in two periods. The concentrations of chlorophyll a, chlorophyll b and carotenoids were increased about 23.2, 14.9 and 6.3 mg/L respectively in period I; meanwhile, the accumulation was about 25.0, 14.5, 6.6 mg/L respectively in the period II. Furthermore, the pH was kept about 5.5–7.5 due to intermittent carbonation mode, which was suitable for the growth of microalgae. Transmembrane pressure (TMP) was only increased by 0.19 and 0.16 bar in the end of periods I and II, respectively. The pure flux recovered to 75%–80% of the original value by only hydraulic cleaning. Scanning electron microscope images also illustrated that carbonation through membrane module could mitigate fouling levels greatly.     

一种复合绝缘子爬电距离测量工具的研制与应用

复合绝缘子在高压输电线路中主要起到支持、固定和绝缘作用,其爬电距离是复合绝缘子检测的必测项目。由于复合绝缘子爬电距离测量存在困难,在传统测量方法的基础上,开发研制了一种复合绝缘子爬电距离测量工具,采用激光直线仪和手持测量仪相配合,进行复合绝缘子爬电距离的测量,并在实际应用中与传统方法相对比。结果表明:该套测量工具不仅解决了试验人员测量复合绝缘子爬电距离时工作量大、测量精度低的问题,而且能够实时显示测量结果,具有双向测量、暂停、停电记忆等功能,提高了测量工作的灵活性和可靠性,同时缩短了复合绝缘子爬电距离测量时间,提高了工作效率。     

330kV输电线路绝缘架空地线专用接地装置的设计与实现

针对330 kV超高压输电线路绝缘架空地线无专用接地线,设计一种串接电阻的新型接地装置,以避免当绝缘架空地线存在过大感应电压时因瞬间直接接地产生的电弧伤害。通过对某330 kV同塔双回输电线路不同情况下绝缘架空地线上产生的感应电压进行仿真分析,为新型接地装置的电气参数选取提供依据,同时详细设计了其机械结构。对新型接地装置进行了现场应用,验证了其相较于传统接地线具有的便携性及安全性优势。     

CQDs/g-C3N4的制备及其光催化降解四环素性能

以三聚氰胺为原料,通过煅烧制得石墨相氮化碳(g-C3N4),以柠檬酸和尿素作为碳量子点(CQDs)的碳源,采用水热法制备出CQDs/g-C3N4复合光催化材料.通过FESEM、FETEM、XRD、XPS、UV-vis对材料的形貌结构进行了表征,研究了其在可见光下降解盐酸四环素性能和机制.结果表明,CQDs的负载增强了材...     

中国各省建筑业碳排放脱钩及影响因素研究

伴随着我国经济的快速发展,能源匮乏、气候变暖等问题日益突出。建筑业作为我国国民经济的支柱产业,面临碳排放较大和能耗较高等问题,是当前我国节能减排的重点领域之一。减少建筑业碳排放,对实现我国节能减排目标具有重大意义。本文按照IPCC碳排放核算方法,建立中国区域建筑业碳排放测算模型,基于30个省份2004-2011年的面板数据,测算了中国各省建筑业在此期间的碳排放量。在此基础上,利用Tapio脱钩模型分析了各省建筑业碳排放的脱钩状态,并运用LMDI方法对碳排放的影响因素进行分解分析。研究结果表明,我国各省建筑业碳排放量在整体上呈逐年上升的趋势,但省际间存在较大差异。各省间接碳排放量均占到总排放量的90%左右,是建筑业碳排放的主要来源。大部分省份处于碳排放的弱脱钩状态,其余省份处于扩张负脱钩状态和增长连接状态,尚未出现强脱钩的省份。建筑业能源碳排放强度效应、能源结构效应以及能源强度效应在样本期间内对碳排放产生负向影响,但影响效果较小,而间接碳排放强度效应和产业规模效应对碳排放产生正向影响,是碳排放的主要影响因素。本文建议,应通过加大绿色建筑材料的使用量、回收利用废旧建材、降低单位面积的建材消耗量、开发利用清洁能源、进一步优化能源结构等措施,来有效地降低建筑业的碳排放。相关部门可根据各省建筑业碳排放的差异性,有针对性地制定减排目标,出台差异化的建筑业发展政策。     

Nanocarrier-mediated co-delivery systems for lung cancer therapy: recent developments and prospects

Environmental Chemistry Letters - Research has recently focused on combinational therapy using nanocarriers to overcome the obstacles associated with conventional therapy of lung cancer. The...     

System dynamic analysis of construction waste recycling industry chain in China

Environmental Science and Pollution Research - With the acceleration of China’s urbanization process, construction activities have led to a substantial increase in construction waste....     

有机肥处理对旱地红壤细菌群落及玉米生产力的影响

为探明旱地红壤细菌群落特征及玉米生产力对不同有机肥处理的响应，基于自2002年设置在中国科学院鹰潭红壤生态实验站的有机培肥长期定位试验，采用Illumina高通量测序，研究不同有机肥（不施肥，M0；低量有机肥，M1；高量有机肥，M2；高量有机肥加石灰，M3）处理下土壤细菌群落多样性和结构以及玉米生产力的变化.结果发现，与M0相比，土壤pH、有机质（SOM）、全氮（TN）、全磷（TP）含量和玉米生产力在不同有机肥（M1、M2和M3）处理下均显著增加，其中M3处理的提升效果最佳.施用有机肥显著提高了土壤细菌群落的Shannon、Evenness、Chao1与ACE指数，重塑了细菌群落结构.基于随机森林模型分析，土壤性质中的pH和TP显著影响土壤细菌多样性，而pH、SOM、TP和TN对土壤细菌群落结构影响显著.相关性分析和结构方程模型分析表明，土壤TP和SOM可以通过改变土壤细菌多样性和群落组成间接影响玉米生产力.研究结果从指导我国南方红壤区农田合理施肥的角度，为农田土壤质量提高及耕地产能提升提供科学依据.     

爆破荷载作用下隧道中隔岩稳定性研究

为研究爆破动力荷载作用下隧道中隔岩稳定性评价标准,以福州地铁2号线为工程背景,结合强度折减动力分析法和数值模拟,同时考虑中隔岩塑性区贯通、位移超过规范值、计算不收敛3种判据,综合对隧道中隔岩进行动力安全系数分析,研究隧道不同净距、不同开挖进尺后行洞隧道爆破开挖对隧道整体安全系数的影响。研究结果表明:中隔岩塑性区贯通时特征点位移和规范中位移限值较为接近,可共同作为评价中隔岩稳定性的最终评价标准;隧道净距越大、进尺越小,隧道整体安全系数越高;对围岩质量较差且净距小于1.6 m的双线隧道进行爆破开挖时,建议将爆破进尺控制在2 m以内。研究结果可为类似工程提供理论参考依据。