Estrus cycle asynchrony in wild female chimpanzees, Pan troglodytes schweinfurthii

Although estrous synchrony has been reported in a number of mammalian species, most often among primates, methodological and analytical problems make it difficult to interpret these results. We developed a novel estrous synchrony index and employed a randomization procedure to analyze long-term observations of female chimpanzee (Pan troglodytes schweinfurthii) estrous cycles at the Mahale Mountains National Park, Tanzania. Our results revealed that female chimpanzees at Mahale avoid synchronizing their estrous periods with each other. We also found that birthrates decreased as the breeding sex ratio increased. We suggest that estrous asynchrony decreases female–female competition for mates. Asynchrony may also reduce the potential for male sexual coercion by nonpreferred mating partners.     

A study on emission of phthalate esters from plastic materials using a passive flux sampler

Phthalate esters are used as plasticizer in many plastics, and several studies have shown their toxicity. Phthalate esters are gradually emitted over time, and so it is conceivable that they pose a significant health risk. This study aims to investigate the temperature dependence of the emissions of various phthalate esters and to estimate the health risks of these emissions at various temperatures. A passive-type sampler was developed to measure the flux of phthalate esters from the surface of plastic materials. With this sampler, we examined three widely used plastic materials: synthetic leather, wallpaper and vinyl flooring. The observed maximum emissions of diethyl phthalate, dibutyl phthalate, and diethylhexyl phthalate (DEHP) from these materials at 20°C were 0.89, 0.77, and 14 μg m⁻² h⁻¹, respectively. Emissions at 80°C were 2.8, 4.5×10², and 1.5×10³ μg m⁻² h⁻¹, respectively. The results showed this temperature dependence is determined primarily by the type of phthalate ester and less so by the type of material. The estimation from the results of temperature dependence indicated the concentration of DEHP in a vehicle left out in the sunshine during the day can exceed the recommended levels of Japan Ministry of Health, Labour and Welfare.     

Adsorbable organic halides (AOX), AOX formation potential, and PCDDs/DFs in landfill leachate and their removal in water treatment processes

Adsorbable organic halides (AOX) and AOX formation potential (AOXFP) were investigated in 46 landfill lea-chates as potentially toxic parameters. AOX in landfill leachate was within the range <10–2200 μg Cl/l, and AOXFP was within 51–15 000 μg Cl/l. AOX and AOXFP correlated with chemical oxygen demand (COD). AOX discharge from closed landfills was generally lower than that from operating landfills. The molar ratio of AOXFP/total organic carbon (TOC) suggested that organic compounds in a leachate have a double bond every 15–190 carbons under the supposition that one chlorine would add to one double bond. The five landfills discharging high-level AOXFP (>4000 μg Cl/l) were all landfills where sludge had been dumped. The removal efficiencies of three parameters through leachate treatment processes were as follows: polychlorinated dibenzo-dioxins/dibenzo-furans (PCDDs/DFs) > TOC > AOX. PCDDs/DFs were substantially removed at p.p.t. levels, while AOX was hardly removed at relatively low levels. Received: February 14, 2000 / Accepted: January 9, 2001     

A practical and simple method in fractional determination of ambient forms of mercury in air

A collecting method to prepare a fractional determination of ambient forms of mercury in air is proposed. Particulate mercury is collected by a glass fiber filter. Sequential trap tubes consist of four long and slender quartz tubes, in which the Chromosorb W treated with HC$\text{l}$ gas for Hg(II), the Chromosorb W treated with 0.1 M NaOH for methylmercury, the silver-wire tip for metallic mercury and the gold plate tip for dimethylmercury are packed. The collection efficiency for these trap tubes was in the range of about 85 ～ 100% at the μg or ng concentration level. With this method, the air was collected by suction at the rate of 1.5 $\text{l}$/min. for about five hours, the detection limit being 0.2 ng Hg/m³. The results indicate that the regional distribution of total mercury in air was considerably greater in the volcanic and hot spring regions. Mercury species was found to be mostly Hg(II), followed by metallic mercury, methylmercury, dimethylmercury and particulate mercury in this order.     

An analytical method to determine Henry's law constant for selected volatile organic compounds at concentrations and temperatures corresponding to tap water use

Henry's law constants (H) are needed to model human exposure to Volatile Organic Compounds (VOCs) in indoor air resulting from the use of tap water. This paper presents an experimental method to determine Hs for several common tap water pollutants at concentrations and temperatures used in household water. For 5 VOCs Henry's law constants were obtained simultaneously over the 25 degrees C to 45 degrees C temperature range, providing data on H beyond the currently available data (up to 35 degrees C). Henry's law constants were obtained as the ratio of equilibrium concentrations of VOCs in air and water, using simultaneous sampling from sealed bottles kept at constant temperatures. Air and water samples were concentrated by a purge-and-trap method, thermally desorbed from a Tenax trap, and analyzed with a gas chromatograph with an electron capture detector (GC-ECD). Experimental results agreed well with available literature data.     

Field validation of an active sampling cartridge as a passive sampler for long-term carbonyl monitoring

A carbonyl sampler originally designed for the active sampling method (Sep-Pak XPoSure) was used for long-term passive sampling, and its applicability as a passive sampler was examined through field experiments. The uptake rates of passive sampling were determined experimentally from collocated passive and active samplings for various sampling periods. The obtained uptake rates of formaldehyde, acetaldehyde, and acetone were 1.48, 1.23, and 1.08 mL/min, respectively. These uptake rates were consistent for a wide range of the sampling term (12 hr-2 weeks). Uptake rates of each carbonyl were proportional to the diffusion coefficients of each. Therefore, the ratios of diffusion coefficients were used to calculate the uptake rates of carbonyls for which the rates were not determined experimentally. Lower limits of determination were 2.16-17.5 microg/m3 for 2-week sampling. It was confirmed that 2-week monitoring of carbonyl concentrations up to 118-229 microg/m3 was possible. Relative standard deviations of the passive method generated from the repeatability test were 2-12.3% error for five samplings, and the recovery efficiencies were larger than 90%. Thus, the passive sampler was found to be highly suitable for long-term monitoring of carbonyl compounds.     

Air Quality Standards National And International

The advantages and disadvantages of establishingworldwide air quality standards are reviewed. Inter-national standards would represent the best and mostadvanced procedures and might lead to improvementin standards in some countries where air quality isfar from adequate. International standards alsowould permit accurate comparisons of air pollutionamong countries and would provide a sound basis forcombatting pollution.     

An Urban Atmospheric Diffusion Model for Traffic-Related Emission Based on Mass-Conservation and Advection-Diffusion Equations

This paper proposes an atmospheric diffusion model for traffic-related emission in urban areas within a few hundred meters from relevant roads. The model adopts the mass-conservation (MC) principle for the velocity calculation and the advection-diffusion (AD) equation for the concentration calculation. This MC+AD combination was chosen to achieve fast calculation for complex geometries. To compensate for the inherent deficiencies of MC and AD, as many known properties possible of turbulent boundary-layer flow over obstacles are incorporated into the MC calculation, and the diffusivity in AD is derived from the velocity spectrum as a function of distance from the emission source. The model is evaluated against wind-tunnel experiments ranging from point-source emission in uniform urban canopy to along-road emission in real city geometries. The model performs well in relatively simple configurations, but the performance deteriorates considerably as the complexity increases. However, in real city geometries, the model exhibits distinctly better performance in terms of statistical indices than a conventional Gaussian-plume model that neglects the effect of individual buildings. The model is therefore a viable option for environmental assessment.     

Basic Research on the Emission of Polycyclic Aromatic Hydrocarbons caused by Waste Incineration

The emission of polycyclic aromatic hydrocarbons (PAH) caused by municipal waste incineration varies according to waste composition and operating parameters such as furnace temperature and excess air. However, to obtain a sample sufficient to measure the emission of PAH at trace levels, it is necessary to operate the incinerator for many hours. Since during these lengthy periods it has not always been possible to maintain stable conditions, it is very difficult to determine the relationship between the emission and waste composition.

In our basic research, therefore, we used municipal waste with an artificially regulated composition for our combustion experiments, and by using an experimental Incinerator we examined the emission behavior of PAH with respect to changes in waste composition and combustion conditions. The following facts were revealed by the results: ? The PAH found in the flue gas were predominantly the more volatile compounds.

? When municipal waste was incinerated at over 850 °C, the concentration of PAH in the flue gas increased rapidly as the proportion of plastics in the waste increased from 0 to 24 percent.

? The elimination of plastics from municipal waste by separate collection and the improvement of combustion conditions can effectively diminish the emission of PAH.