UPLC-MS/MS法同时测定地表水中多种有机污染物

采用超高效液相色谱-串联质谱法直接进样测定地表水中26种有机污染物,通过优化试验条件,使各目标化合物在1.00μg/L^100μg/L范围内线性良好,相关系数(r 2)>0.995,方法检出限为0.003μg/L^1.0μg/L。将该方法用于地表水样的测定,加标回收率为79.0%~120%,6次测定结果的RSD均<15%。     

日本道路交通噪声监测体系与借鉴

系统介绍了日本环保部门每年在全国范围内开展的道路交通噪声普查性监测工作及评价体系,分析了中日两国监测与评价方法的异同和优缺点,提出在点位布设、评价方法、信息公开等方面的改进建议,以推进中国道路交通噪声监测工作向科学化、精细化、定量化转变。     

鄂尔多斯气田泥浆池防渗层对有害物质的阻滞作用评价

随着天然气勘探开发速度的加快,鄂尔多斯气田井场废泥浆产生量越来越大,固化处理后将其填埋于有防渗层的泥浆池中是目前该区域最常用的方法,但国内外就气田井场泥浆池防渗层对池内污染物实际阻滞效果的研究报道较少。为研究上述处理方法的实际环境效应,以2010年盆地内正在开发气井井场泥浆池内预固化处理沉淀物的分析结果为参照,选择其中污染程度较为严重的石油类、COD、硫化物和砷、钡、镍、铅、铜4种为重点污染物,选择2005—2009年分别投入使用的5个气田井场废弃泥浆池为考察对象,分析研究了防渗层投运时间对不同污染物阻滞作用的影响。结果表明,投运1年的防渗层可阻留污染物90%以上,投运2年以上的防渗层对污染物的阻滞作用有不同程度下降,投运5年的防渗层对所监测污染物的阻滞作用最好的是钡(40.14%)、最差的为硫化物(10.89%),结合不同时间防渗层破损状况和其对污染物的阻滞效率的变化情况,说明机械刺穿和不均匀降是导致防渗层在研究区域的环境下阻滞功能退化较快的主要原因。     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume of dust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 μm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.

Implications: VOCs and particles have been of interest both in industrial field and public indoor spaces. In this study, a post cyclone (PoC) that utilizes a residual vortex from the mother cyclone was modified by inserting a flow guide and was applied to capture toluene vapor. The device of modified post-cyclone system can be used effectively in simultaneous treatment of gas-solid flow.     

The effects of Herba Andrographitis hedgerows on soil erodibility and fractal features on sloping cropland in the Three Gorges Reservoir Area

To evaluate if hedgerows could improve the soil physicochemical properties and enhance the soil anti-scouring and anti-shearing capabilities, the effects of Herba Andrographitis hedgerows on soil erodibility and fractal features on sloping cropland in the Three Gorges Reservoir Area were investigated. Results showed that: (1) the clay particle accumulation around the hedgerows was significantly affected by the hedgerows; (2) the fractal dimension of soil particles was positively correlated with both silt and clay contents and had a negative linear correlation with sand content; (3) fine-grained content significantly influenced fractal dimension of the soil particles; (4) soil erodibility K was significantly and positively correlated with the sand content (correlation coefficient r?=?0.870), but significantly and negatively correlated with the silt content (r?=??0.538), clay content (r?=??0.739), organic carbon content (r?=??0.603), the aggregation degree (r?=??0.486), and soil fractal dimension (r?=??0.538); and (5) the contents of organic matter and clay particles in the soil were found to be the effective indicators for soil erodibility at the Three Gorges Reservoir Area. The hedgerows may improve soil fractal features and decrease soil erodibility. The effective distance between hedgerows on a slope of 10° was less than 6 m.     

Persistence of the herbicide butachlor in soil after repeated applications and its effects on soil microbial functional diversity

Effects of repeated applications of the herbicide butachlor (N-(butoxymethyl)-2-chloro -N-2′,6′-dimethyl acetanilide) in soil on its persistence and soil microbial functional diversity were investigated under laboratory conditions. The degradation half-lives of butachlor at the recommended dosage in soil were calculated to be 12.5, 4.5, and 3.2 days for the first, second, and third applications, respectively. Throughout this study, no significant inhibition of the Shannon-Wiener index H′ was observed. However, the Simpson index 1/D and McIntosh index U were significantly reduced (P ≤ 0.05) during the initial 3 days after the first application of butachlor, and thereafter gradually recovered to a similar level to that of the control soil. A similar variation but faster recovery in 1/D and U was observed after the second and third Butachlor applications. Therefore, repeated applications of butachlor led to more rapid degradation of the herbicide, and more rapid recovery of soil microorganisms. It is concluded that repeated butachlor applications in soil had a temporary or short-term inhibitory effect on soil microbial communities.     

基于生命周期分析的餐厨垃圾肥料化利用环境风险评价研究

餐厨垃圾肥料化利用过程的风险因子主要产生于原料运输与存储、预处理、堆肥、废物填埋和肥料化产品施用5个过程,其风险影响包括地表水和地下水污染、恶臭污染、土壤盐碱化和影响作物生长以及由此引起的人体健康损害.基于生命周期全过程分析,以好氧堆肥为代表的餐厨垃圾肥料化利用的环境风险为研究对象,系统地分析了餐厨垃圾堆肥过程中的潜在风险,归纳并提出风险源项估算以及环境风险影响评价的具体方法和相关参数,通过南京市餐厨垃圾示范性项目案例,说明餐厨垃圾肥料化利用风险评价方法的具体应用.     

松花江水质的多元统计分析

采用主成分分析法、因子分析法对松花江干流11个断面的水质监测数据按照不同水期进行分析,研究了各水质参数的相关性并对污染来源及不同水期内反映水质的重要参数进行了初步探讨.结果表明,水中可生物降解污染物对水体DO有一定的影响,水体温度是控制耗氧性污染物降解的主要因素.枯水期NH3-N与生活污水排放有重要关系,且在TN中占有较高比例.丰水期NH3-N与挥发酚相关性增加,这可能与汛期内煤化工类企业排放不达标有关;平水期,NH3-N与NO3-N相关性增加,可能平水期的污染来源及负荷与其他水期有差别.通过因子分析发现,在不同水期有不同的水质参数影响水质,枯水期大肠杆菌、TP是反映水质的重要参数;丰水期NH3-N、TP、石油类、pH为影响水质的主要水质参数;平水期DO、TN、电导率是反映松花江水质状况的重要水质参数,应当针对不同水期的污染负荷构成制定相应的污染防治方案.     

焦化废水处理过程外排污泥中重金属形态特征及其潜在环境风险

焦化废水处理过程所排放污泥中重金属的含量及化学形态是否构成环境风险将直接影响污泥处置方法的选择,为此,实验采用BCR顺序提取法分析了焦化废水处理站外排污泥中重金属(Cd、Hg、Pb、Cr、As、Ni、Zn、Cu和Mn)的形态特征,并采用地累积指数(Igeo)和潜在生态危害指数(RI)评价了重金属对土壤的潜在环境风险。研究结果表明:除Ni主要以可氧化态存在外,焦化废水外排污泥中其他几种重金属元素主要存在于残渣态,重金属元素的含量低于《城镇污水处理厂污染物排放标准(GB18918—2002)》中的控制限值;与城市污泥相比,焦化废水外排污泥具有低Pb、Cr、Zn、Cu含量,而高Cd、Hg、Mn含量的特点;基于Igeo和RI的评价结果,Cd和Hg是外排污泥中具有一定环境风险的元素,需要考虑其下游去向。焦化废水处理外排污泥中主要存在残渣态重金属成分,不表现为很高的环境风险,其处置应重点考虑其中有机污染物特别是POPs。     

氟化工建设项目清洁生产评价

针对某大型氟化工项目,从氟化工产业链的发展、清洁生产控制指标、持续清洁生产等方面分析评价了该企业所采取的清洁生产措施。指出企业在以后的生产过程中应密切关注产品生产新工艺的进展,研究对原有工艺参数的优化,完善环境管理制度,不断探索先进的管理经验,从源头消减污染物的产生量,提高企业经济效益。