Integral use of plants and their residues: the case of cocoyam (<Emphasis Type="Italic">Xanthosoma sagittifolium</Emphasis>) conversion through biorefineries at small scale

During last decades, there has been a growing interest of decreasing the environmental impact generated by humans. This situation has been approached from different perspectives being the integral use of raw materials as one of the best alternatives. It was estimated that 3.7?×?10⁹ tonnes of agricultural residues are produced annually worldwide. Then, the integral use of feedstocks has been studied through the biorefinery concept. A biorefinery can be a promissory option for processing feedstocks in rural zones aiming to boost the techno-economic and social growth. However, many plants produced at small scale in rural zones without high industrial use contribute with residues usually not studied as raw materials for other processes. Cocoyam (Xanthosoma sagittifolium) is a plant grown extensively in tropical regions. Nigeria, China, and Ghana are the main producers with 1.3, 1.18, and 0.9 million tonnes/year, respectively. In Colombia, there are no technified crops, but it is used where it is grown mainly as animal feed. This plant consists of leaves, stem, and a tuber but the use is generally limited to the leaves, discarding the other parts. These discarded parts have great potential (lignocellulose and starch). This work proposes different processing schemes using the parts of the plant to obtain value-added products, and their techno-economic and environmental assessment. The simulation was performed with Aspen Plus and the economic package was used for the economic assessment. For the environmental assessment, Waste Algorithm Reduction of the U.S. EPA was implemented. The obtained results showed that the integral use of plants under a biorefinery scheme allows obtaining better techno-economic and environmental performance and that small-scale biorefineries can be a promissory option for boosting rural zones.     

Source apportionment of polycyclic aromatic hydrocarbons in Lake Baikal water and adjacent air layer

The composition of polycyclic aromatic hydrocarbons (PAHs) in Lake Baikal water and adjacent air layer and PAH emission composition profiles of possible sources were investigated. Analysis of emission composition data showed that the source profiles could not be grouped by fuel type or pyrogenic/petrogenic origin. Because of the similarity of source PAH profiles, the drawing of 3D mixing diagrams was the only way to check whether some of the potential PAH sources were the true sources. The mixing diagrams showed that the sources of air pollution were paper mills and wood burning and that the sources of water pollution were coal-fired and oil-fired boilers. The common source for both air and water was only oil and petroleum products. To determine the locations of PAH sources, their contributions to air and water pollution were calculated and mapped. Based on the results, air and water were polluted from both local and regional sources. The location of the zone influenced by a particular source was conditioned by physical properties of source emission, direction of air/water flows that transfer PAHs and temperature differences between mixing air/water flows.     

Air pollution dispersion within urban street canyons

A semi-empirical mathematical model, Urban Street Model (USM), is proposed to efficiently estimate the dispersion of vehicular air pollution in cities. This model describes urban building arrangements by combining building density, building heights and the permeability of building arrangements relative to wind flow. To estimate the level of air pollution in the city of Krasnoyarsk (in Eastern Siberia), the spatial distribution of pollutant concentrations off roadways is calculated using Markov's processes in USM. The USM-predicted numerical results were compared with field measurements and with results obtained from other frequently used models, CALINE-4 and OSPM. USM consistently yielded the best results. OSPM usually overestimated pollutant concentration values. CALINE-4 consistently underestimated these values. For OSPM, the maximum differences were 160% and for CALINE-4 about 400%. Permeability and building density are necessary parameters for accurately modeling urban air pollution and influencing regulatory requirements for building planning.     

Characterisation of urban inhalation exposures to benzene,formaldehyde and acetaldehyde in the European Union

BACKGROUND, AIM AND SCOPE: All across Europe, people live and work in indoor environments. On average, people spend around 90% of their time indoors (homes, workplaces, cars and public transport means, etc.) and are exposed to a complex mixture of pollutants at concentration levels that are often several times higher than outdoors. These pollutants are emitted by different sources indoors and outdoors and include volatile organic compounds (VOCs), carbonyls (aldehydes and ketones) and other chemical substances often adsorbed on particles. Moreover, legal obligations opposed by legislations, such as the European Union's General Product Safety Directive (GPSD) and Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), increasingly require detailed understanding of where and how chemical substances are used throughout their life-cycle and require better characterisation of their emissions and exposure. This information is essential to be able to control emissions from sources aiming at a reduction of adverse health effects. Scientifically sound human risk assessment procedures based on qualitative and quantitative human exposure information allows a better characterisation of population exposures to chemical substances. In this context, the current paper compares inhalation exposures to three health-based EU priority substances, i.e. benzene, formaldehyde and acetaldehyde. MATERIALS AND METHODS: Distributions of urban population inhalation exposures, indoor and outdoor concentrations were created on the basis of measured AIRMEX data in 12 European cities and compared to results from existing European population exposure studies published within the scientific literature. By pooling all EU city personal exposure, indoor and outdoor concentration means, representative EU city cumulative frequency distributions were created. Population exposures were modelled with a microenvironment model using the time spent and concentrations in four microenvironments, i.e. indoors at home and at work, outdoors at work and in transit, as input parameters. Pooled EU city inhalation exposures were compared to modelled population exposures. The contributions of these microenvironments to the total daily inhalation exposure of formaldehyde, benzene and acetaldehyde were estimated. Inhalation exposures were compared to the EU annual ambient benzene air quality guideline (5 microg/m3-to be met by 2010) and the recommended (based on the INDEX project) 30-min average formaldehyde limit value (30 microg/m3). RESULTS: Indoor inhalation exposure contributions are much higher compared to the outdoor or in-transit microenvironment contributions, accounting for almost 99% in the case of formaldehyde. The highest in-transit exposure contribution was found for benzene; 29.4% of the total inhalation exposure contribution. Comparing the pooled AIRMEX EU city inhalation exposures with the modelled exposures, benzene, formaldehyde and acetaldehyde exposures are 5.1, 17.3 and 11.8 microg/m3 vs. 5.1, 20.1 and 10.2 microg/m3, respectively. Together with the fact that a dominating fraction of time is spent indoors (>90%), the total inhalation exposure is mostly driven by the time spent indoors. DISCUSSION: The approach used in this paper faced three challenges concerning exposure and time-activity data, comparability and scarce or missing in-transit data inducing careful interpretation of the results. The results obtained by AIRMEX underline that many European urban populations are still exposed to elevated levels of benzene and formaldehyde in the inhaled air. It is still likely that the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended formaldehyde 30-min average limit value of 30 microg/m3 are exceeded by a substantial part of populations living in urban areas. Considering multimedia and multi-pathway exposure to acetaldehyde, the biggest exposure contribution was found to be related to dietary behaviour rather than to inhalation. CONCLUSIONS: In the present study, inhalation exposures of urban populations were assessed on the basis of novel and existing exposure data. The indoor residential microenvironment contributed most to the total daily urban population inhalation exposure. The results presented in this paper suggest that a significant part of the populations living in European cities exceed the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended (INDEX project) formaldehyde 30-min average limit value of 30 microg/m3. RECOMMENDATIONS AND PERSPECTIVES: To reduce exposures and consequent health effects, adequate measures must be taken to diminish emissions from sources such as materials and products that especially emit benzene and formaldehyde in indoor air. In parallel, measures can be taken aiming at reducing the outdoor pollution contribution indoors. Besides emission reduction, mechanisms to effectively monitor and manage the indoor air quality should be established. These mechanisms could be developed by setting up appropriate EU indoor air guidelines.     

Direct and Adjoint Oil Spill Estimates

Propagation of the oil spilling from a damaged oil tanker is considered in a limited sea area. The accident consequences are evaluated by means of direct and adjoint oil concentration estimates in ecologically sensitive zones. While the direct estimates are preferable to get a comprehensive idea of the oil spill impact on the whole area, the adjoint ones are useful and economical in studying the sensitivity of the oil concentration in some zones to variations in the accident site and oil spill rate from the tanker. Thanks to special boundary conditions set at the inflow and outflow parts of the open boundary, the main and adjoint oil transport problems are both well-posed according to Hadamard (1923). The estimates obtained in Skiba (1996a) are generalized to the three dimensions. Balanced, absolutely stable 2nd-order finite-difference schemes based on the splitting method are constructed for the two- and three-dimensional cases, both. The main and adjoint schemes are compatible in the sense that at every fractional step of the splitting algorithm, the one-dimensional split operators of both the schemes satisfy a discrete form of the Lagrange identity (Marchuk, 1995). In the special unforced and non-dissipative case, the schemes have two conservation laws each. Each split problem is solved by the factorization method.     

Industrial pollution transport. Part 2. Control of industrial emissions

Solutions of the pollution transport problem and its adjoint are used to monitor mean pollution concentration in an ecologically important zone. Four strategies of control over pollutants released into the atmosphere by industrial plants are suggested. They differ by the restrictions imposed on the emission rate of each plant. All the strategies use solutions of the adjoint transport problem and assure the fulfillment of the sanitary norm in the zone. A linear interpolation of these strategies also brings pollution level in the zone down to the sanitary norm. A method of detecting the plants violating the prescribed emission rates is also given. A simple example is given to illustrate the strategies suggested.     

Unexpected release of HNO<Subscript>3</Subscript> and related species from UV-illuminated TiO<Subscript>2</Subscript> surface into air in photocatalytic oxidation of NO<Subscript>2</Subscript>

We have discovered that HNO₃ and related species are released from the TiO₂ surface into air in the TiO₂ photocatalytic oxidation of NO₂ (1 ppm) under continuous UV light illumination (1 mW cm⁻²) by dehumidifying the outlet gas of the reaction and analyzing the recovered condensate liquid by ion chromatography. The origin of the HNO₃ recovered in the dehumidifier could not be explained by a simple desorption of HNO₃ overproduced on the TiO₂ surface. The produced HNO₃ must be activated on the TiO₂ surface and causing the unidentified reaction.     

Comparative equilibrium studies of sorption of Pb(II) ions by sodium and calcium alginate

The absorption of Pb(II) ions from aqueous solution by di erent alginate compounds was studied in a batch sorption system. Water soluble sodium alginate and insoluble calcium alginate beads were investigated. The lead-binding capacity of both alginate compounds was highest within the pH range 6–8. The binding capacities and rates of Pb(II) ions by alginate compounds were evaluated. The Langmuir, Freundlich, and Bruneaur, Emmet and Teller (BET) sorption models were applied to describe the isotherms and isotherm constants. Sorption isothermal data could be well interpreted by the Langmuir model. The results obtained through the study suggest that alginate compounds are favorable sorbents. The largest amount of Pb(II) ions were bound by sodium alginate although the di erence between two compounds was slight. Therefore, alginate substances may be considered as an alternative for sorption and removal of Pb(II) ions from wastewaters.     

Status and trends of terrestrial arthropod abundance and diversity in the North Atlantic region of the Arctic

Ambio - The Circumpolar Biodiversity Monitoring Programme (CBMP) provides an opportunity to improve our knowledge of Arctic arthropod diversity, but initial baseline studies are required to...     

北极4个亚区的影响分析

在评价北极陆地生态系统影响时,人们常常强调物种和生态系统对环境变化响应的地理变化,这种变化往往与气候、生物多样性、植被带、生态系统结构和功能的南-北梯度相关联,可是,环境、生态系统的功能和结构上,以及环境史和当前气候变化的明显东-西变化显然也很重要.尽管一些地方变得温暖,但另一些地方却降温了,海洋、群岛和山脉等地理屏障的东西差异过去也对物种和植被带响应气候变化而改变分布区的能力产生了很大影响,同时,这些地理屏障为种群遗传分化和生物多样性热点区的形成提供了必要的隔离条件,这些屏障在未来气候变暖时,也将影响物种重新分布的能力.为了说明这种东西向的变化,同时也避免过分笼统或过于专业化,基于大尺度的天气和气候形成因素,北极气候影响评价项目确定了4个主要亚区.通过模拟与4个北极气候影响评价亚区有关的主要信息,导致物种分布区发生改变的地理屏障,特别是大陆的分布和海洋产生的隔离,明显会影响植被带的向北移动.对植被区向北移动的地理限制或者促进将影响将来碳的贮存和释放,以及生物圈与大气之间水和能量的交换.此外,气候变化使受威胁物种数量在各个亚区之间差别很大(白令海地区别尤其是热点),各个植被亚区重新分布的能力差异将影响每个区的生物多样性.总而言之,亚区分析表明,在整个北极地区水平上概括生态系统结构和功能的反应、物种的丧失,以及生物圈对气候系统的反馈的趋势是困难的,说明需要对北极陆地生态系统对于气候变化响应的空间变化性有深刻的认识.