Insight into the dynamic microbial community and core bacteria in composting from different sources by advanced bioinformatics methods

Microbial communities are important for high composting efficiency and good quality composts. This study was conducted to compare the changes of physicochemical and bacterial characteristics in composting from different raw materials, including chicken manure (CM), duck manure (DM), sheep manure (SM), food waste (FW), and vegetable waste (VW). The role and interactions of core bacteria and their contribution to maturity in diverse composts were analyzed by advanced bioinformatics methods combined sequencing with co-occurrence network and structural equation modeling (SEM). Results indicated that there were obviously different bacterial composition and diversity in composting from diverse sources. FW had a low pH and different physiochemical characteristics compared to other composts but they all achieved similar maturity products. Redundancy analysis suggested total organic carbon, phosphorus, and temperature governed the composition of microbial species but key factors were different in diverse composts. Network analysis showed completely different interactions of core bacterial community from diverse composts but Thermobifida was the ubiquitous core bacteria in composting bacterial network. Sphaerobacter and Lactobacillus as core genus were presented in the starting mesophilic and thermophilic phases of composting from manure (CM, DM, SM) and municipal solid waste (FW, VW), respectively. SEM indicated core bacteria had the positive, direct, and the biggest (>?80%) effects on composting maturity. Therefore, this study presents theoretical basis to identify and enhance the core bacteria for improving full-scale composting efficiency facing more and more organic wastes.

     

CdS and Ag synergistically improved the performance of g-C3N4 on visible-light photocatalytic degradation of pollution

Environmental Science and Pollution Research - CdS-AgO@g-C3N4 nanocomposites were successfully synthesized and characterized by XRD, N2 physical adsorption, XPS, SEM, TEM, EDX, and UV–Vis DRS...     

应用地累积指数评价鞍山市夏季PM2.5中元素的污染

2014年夏季在鞍山市的6个站点进行了PM2.5的样品采集,对其载带的15种元素进行了检测。通过地累积指数、相关分析和聚类分析等方法分析了鞍山市夏季PM2.5中15种元素的污染来源。结果表明:Ca、Zn、Pb、Ni和Cd这5种元素的质量分数在各站点之间存在较大的差异;地累积指数结果显示,Cd为极强污染程度,可能的来源是钢铁冶炼和刹车及轮胎磨损,Pb和Zn污染程度在强污染以上,Pb可能的主要人为来源是钢铁冶炼和窖炉煤的燃烧,Zn可能主要来自钢铁冶炼和机动车,Cu、Ni、Cr和Ca中到强污染以下;聚类分析将中度污染及以上元素分为Zn-Cd-Pb,Ni-Cu-Cr和Ca 3类,分别指示钢铁冶炼、机动车尾气及刹车、轮胎磨损,建筑尘;相关性分析显示,Cr与Ni、Cu可能来自同一污染源,Zn、Cd和Pb可能来自同一种源。     

基于压力响应关系法的湖泊营养物基准制定

湖泊富营养化与氮、磷及有机物含量过高密切相关,建立数字型营养物基准能够防止富营养化对水体指定用途造成影响.太湖流域是我国华东地区经济腹地,近年来流域内湖泊水质每况愈下,对其基准研究可为湖泊治理提供依据.详细介绍了压力响应关系法制定湖泊营养物基准的步骤,并将此方法运用到太湖流域营养物基准制定研究中.为满足大多数水体指定用途,研究中将该流域湖泊基本功能确定为娱乐、永生生物栖息地及饮用水,以此构建流域概念模型.选择压力变量为总氮(TN)、总磷(TP)和有机物,响应变量为叶绿素a(chl-a).用非参数分析法和线性回归法分别建立压力-响应模型,通过2种方法相互验证得到TN、TP和CODMn基准分别为0.593、0.067和4.092 mg/L.     

Stand-alone wind power system with battery/supercapacitor hybrid energy storage

This paper presents a stand-alone wind power system with battery/supercapacitor hybrid energy storage. A stand-alone wind power system mainly consists of a wind turbine, a permanent magnet synchronous generator, hybrid energy storage devices based on a vanadium redox flow battery and a supercapacitor, an AC/DC converter, two bidirectional DC/DC converters, a DC/AC converter and a variable load. Several control strategies for the stand-alone wind power system are involved such as a maximum power point tracking (MPPT) control, a vanadium redox flow battery charge/discharge control and a supercapacitor charge/discharge control. The proposed MPPT control combines a sliding mode control with an extreme search control to capture maximum wind energy. This strategy avoids the necessity of measuring wind velocity, obtaining models or parameters of the wind turbine and calculating the differentials of the power generated from the wind power system and from the speed of the generator. The battery charge/discharge control maintains a constant DC bus voltage. When the battery charging/discharging current reaches the setting threshold, the charge/discharge control of the supercapacitor is triggered to limit the charging/discharging current of the battery. The simulation results show that the proposed method can rapidly respond to variations in wind velocity and load power.     

高效液相色谱法测定水中的六种邻苯二甲酸酯研究

建立了高效液相色谱法测定水中六种邻苯二甲酸酯(邻苯二甲酸二甲酯、邻笨二甲酸二乙酯、邻苯二甲酸二丁酯、邻苯二甲酸二(2-乙基己基)酯、邻苯二甲酸二辛酯、邻苯二甲酸丁基苄酯)的检测方法.对水样中邻苯二甲酸酯的萃取条件和高效液相色谱分析条件进行优化,采用正己烷二次萃取,浓缩定容后分析,以乙腈-水为流动相梯度洗脱,紫外检测波长226 nm,16 min可将六种邻苯二甲酸酯分离出.方法的检出限为0.13μg/L ～0.37 μg/L,加标回收率为78.6％～118.5％,相对标准偏差为0.82％～2.17％,是一种理想的测定水中六种邻苯二甲酸酯的方法.     

快速溶剂萃取技术(ASE)在水环境监测中的比较研究及展望

萃取技术是一种样品前处理方法,可以用于水环境等领域的监测。其中较为受推崇的主要是快速萃取技术和固相萃取技术。本文通过快速萃取技术原理的简单分析,重点将其与传统的几种萃取技术进行了比较,并对未来的发展趋势作了简要展望。     

曝气对潜流人工湿地中木本植物的影响

为了增加人工湿地植物的多样性,本文将花叶冬青(Ilex aquifolium)、月季(Rosa chinensis)和八角金盘(Fatsia japonica)3种木本植物引入潜流人工湿地,比较曝气前后系统对污水处理效果,植物的生物量与对TN、TP负荷减少的贡献率,根系形态与内部结构、根际微生物与基质酶活性的比较研究。结果表明,木本植物潜流人工湿地系统曝气后可以提高COD、NH4+-N、TN、TP的去除率,分别为6.99%、4.91%、10.25%、8.09%。湿地曝气有利于3种木本植物的生长,在曝气后比曝气前生物量增加了381.75、606.25和896.88 g/m2。曝气会促使木本植物长出大量须根,且曝气后的根系具有大量由薄壁细胞组成的通气组织的水生根特征。同时,曝气后增加了硝化菌数量,各处理单元中硝化菌增量分别为A:0.28 MPN×104/g,B:4.23 MPN×104/g,C:7.7 MPN×104/g。另外,曝气后植物根际基质中磷酸酶和尿酶的含量增加量大约在50%以上,这与系统中N和P的去除率提高的规律一致。     

Lead adsorption capacities of different components in natural surface coatings

Pb adsorption capacities of Fe oxide, Mn oxide and organic materials in natural surface coatings (biofilms and associated minerals) collected in three lakes, two ponds and a river in Jilin Province, China and Cayuga Lake in US were studied. A novel extraction technique was employed to remove one or more component(s) from the surface coatings. Pb adsorption to surface coatings before and after extraction was performed to determine the adsorptive properties of the extracted component(s). The statistical analysis of observed Pb adsorption was carried out using nonlinear least squares fitting (NLSF) to estimate the Pb adsorption capacity of each component of surface coatings. For each body of water, the estimated Pb adsorption capacity of Mn oxide( mol Pb/mol Mn) was significantly higher than that of Fe oxide( mol Pb/ mol Fe). The value of estimated adsorption capacities of organic materials with the unit mol Pb per kg COD was similar to or less than that of Fe oxides with the unit mol Pb per mol Fe. Comparison of components of surface coatings in different waters showed that the estimated Pb adsorption capacities of components in surface coatings developed in different natural waters were different,especially for Mn oxides.