A method to assess soil erosion from smallholder farmers’ fields

Soil erosion by water is a major threat to sustainable food production systems in Africa. This study presents a qualitative soil erosion assessment method that links the number of broken ridges (NBRS) observed on a smallholder farmer’s field after a rain event to factors of soil erosion (e.g., rainfall intensity, slope steepness, crop canopy height, and conservation practice) and to soil loss data measured from a runoff plot and receiving small streams. The assessment method consists of a rapid survey of smallholder farmers combined with field monitoring. Results show an indirect relationship between NBRS and factors of soil erosion. Results also show a direct relationship between NBRS and suspended sediment concentrations measured from an experimental runoff plot and receiving streams that drain the sub-watersheds where farmers’ fields are located. Given the limited human and financial resources available to soil erosion research in developing countries, monitoring NBRS is a simple, cost-effective, and reliable erosion assessment method for regions where smallholder farmers practice contour ridging.     

Assessing Mn, Fe, Cu, Zn, and Cd pollution in bottom sediments of Wadi Al-Arab Dam, Jordan

Thirty five bottom sediment samples were collected in a grid pattern from Wadi Al-Arab Dam. The present study focuses on the levels of Mn, Fe, Cu, Zn, Cd, total organic matter (TOM) and carbonate content (CO(3)(-2)) in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of the dam. Concentration data were processed using correlation analysis and factor analysis. The results of correlation analysis and factor analysis show low positive and negative correlations among Mn, Fe, Cu, Zn, Cd, TOM, and CO(3)(-2) and indicate that heavy metals in sediments of Wadi Al-Arab have different anthropogenic and natural sources. The results also confirm the complicated behavior of these pollutants, that can be influenced by many factors. Sediments pollution assessment was carried out using enrichment factor and the geoaccumulation index. The calculation of enrichment factors showed that Mn and Cu are depleted by 0.76, and 1.33, respectively, whereas Cu, Zn, and Cd are enriched by 3.6, and 30, respectively. The results of geoaccumulation index reveal that sediments of Wadi Al-Arab are uncontaminated with Mn, Fe, and Cu, moderately contaminated with Zn, and strongly to extremely contaminated with Cd. Some of the elevated concentration of Zn and Cd are probably due to anthropogenic sources nearby the dam site. These sources mainly include fertilizers and pesticides used in agricultural activities, and the effluent of Irbid City treatment plant. Environmental risks of Cd and Zn were evaluated using the risk assessment code (RAC) and sequential extraction method. Zn poses a low environmental risk, whereas Cd poses a medium environmental risk.     

DNA damage effect of cyprodinil and thiacloprid in adult zebrafish gills

Cyprodinil and thiacloprid are two of the most commonly used pesticides in Turkey. It is more likely to reach humans or animals due to their widespread use. This study aims to investigate whether there is a DNA damage risk due to cyprodinil and thiacloprid exposure. Zebrafish, which is used as a model organism in health and environmental research, and comet assay were chosen to demonstrate this damage. Ten zebrafish per group were exposed to 2 different concentrations for each pesticides (0.31 and 0.155 mg/L for cyprodinil and 1.64 and 0.82 mg/L for thiacloprid) for 21 days. After, gills were excised and comet assay was performed. Photos of an average of 50 cells per slide were taken and were analyzed with visual evaluation program. DNA damage was found to be increased in the 0.31 mg/L cyprodinil, 0.82 mg/L thiacloprid, and 1.64 mg/L thiacloprid treatment groups when compared to the control group (p < 0.001). Average tail DNA percentage parameter values were 9.45 ± 0.51, 10.30 ± 0.34, 11.17 ± 0.33, and 2.47 ± 0.06 respectively. Cyprodinil and thiacloprid were identified as genotoxic agents that should be investigated further.

     

Inactivation of coliform bacteria in Black Sea waters due to solar radiation

The effects of solar radiation and temperature on bacterial die-off rates in Black Sea coastal waters using total coliform as the indicator organism were studied. Coliform die-off experiments were carried out in seawater samples collected along the coastline. The experiments were conducted in beakers filled with seawater that were kept at constant temperatures and exposed to solar radiation. The membrane filter technique was used for the coliform analysis. Temperature ranging between 9 and 26 degrees C and solar radiation between 20 and 60 cal/cm(2) h were tested. Experiments in the dark were also conducted to isolate the effect of solar radiation from the other factors and, furthermore, to determine the effect of temperature on bacterial die-off. The solar radiation was found to be the most significant factor affecting the mortality of coliform bacteria.     

Enhancing Hyrdological Simulation Program – FORTRAN Model Channel Hydraulic Representation1

Abstract: The hydrological simulation program – FORTRAN (HSPF) is a comprehensive watershed model that employs depth‐area‐volume‐flow relationships known as the hydraulic function table (FTABLE) to represent the hydraulic characteristics of stream channel cross‐sections and reservoirs. An accurate FTABLE determination for a stream cross‐section site requires an accurate determination of mean flow depth, mean flow width, roughness coefficient, longitudinal bed slope, and length of stream reach. A method that uses regional regression equations to estimate mean flow depth, mean flow width, and roughness coefficient is presented herein. FTABLES generated by the proposed method (Alternative Method) and FTABLES generated by Better Assessment Science Integrating Point and Nonpoint Sources (BASINS) were compared. As a result, the Alternative Method was judged to be an enhancement over the BASINS method. First, the Alternative Method employs a spatially variable roughness coefficient, whereas BASINS employs an arbitrarily selected spatially uniform roughness coefficient. Second, the Alternative Method uses mean flow width and mean flow depth estimated from regional regression equations whereas BASINS uses mean flow width and depth extracted from the National Hydrography Dataset (NHD). Third, the Alternative Method offers an option to use separate roughness coefficients for the in‐channel and floodplain sections of compound channels. Fourth, the Alternative Method has higher resolution in the sense that area, volume, and flow data are calculated at smaller depth intervals than the BASINS method. To test whether the Alternative Method enhances channel hydraulic representation over the BASINS method, comparisons of observed and simulated streamflow, flow velocity, and suspended sediment were made for four test watersheds. These comparisons revealed that the method used to estimate the FTABLE has little influence on hydrologic calibration, but greatly influences hydraulic and suspended sediment calibration. The hydrologic calibration results showed that observed versus simulated daily streamflow comparisons had Nash‐Sutcliffe efficiencies ranging from 0.50 to 0.61 and monthly comparisons had efficiencies ranging from 0.61 to 0.84. Comparisons of observed and simulated suspended sediments concentrations had model efficiencies ranging from 0.48 to 0.56 for the daily, and 0.28 to 0.70 for the monthly comparisons. The overall results of the hydrological, hydraulic, and suspended sediment concentration comparisons show that the Alternative Method yielded a relatively more accurate FTABLE than the BASINS method. This study concludes that hydraulic calibration enhances suspended sediment simulation performance, but even greater improvement in suspended sediment calibration can be achieved when hydrological simulation performance is improved. Any improvements in hydrological simulation performance are subject to improvements in the temporal and spatial representation of the precipitation data.     

Assessment of antimicrobial activity of Catechu and its dyed substrate

The present study was undertaken to evaluate the antimicrobial activity of catechu in solution and % microbial reduction of dyed wool samples against Escherichia coli MTCC 443, Staphylococcus aureus MTCC 902, Candida albicans ATCC 10261 and Candida tropicalis ATCC 750, by using micro-broth dilution method, disc diffusion assay and growth curve studies. The dye showed the maximum antimicrobial activity at 20% w/v, inhibiting the microbial growth by more than 90%. In the next set of the experiments the antimicrobial activity of the dye was compared on woollen yarn alone and on pre-mordanted samples. The reduction in antimicrobial activity was observed when mordanted samples were examined. K/S, CIELab values and fastness properties of the dyed samples were assessed. The structural morphology of woollen yarn was also evaluated using scanning electron microscopy (SEM). Haemolytic activity on human erythrocytes was studied to exclude possibility of further associated cytotoxicity. The observed antimicrobial characteristics and negligible cytoxicity of catechu indicate that the dye might be a promising antimicrobial agent for developing bioactive textile materials and clothing.     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.     

Assessment of the exposure of two fish species to metals pollution in the Ogun river catchments, Ketu, Lagos, Nigeria

The concentrations of metals (Ca, Cd, Fe, Mn, Pb and Zn) were determined by flame atomic absorption spectrophotometry in water, sediments and fish samples in the Ogun river catchments, Ketu, Lagos, which is an important bird nesting, fishing and drinking water source. The results show that the southern tip bothering the Lagos lagoon is where the highest metal concentrations are found in the fish species (Tilapia sp. and Chrysichthys sp.), whereas the Agboyi creek segment near the lagoon with higher surrounding human population density recorded higher levels of metals in sediments and water samples. The two fish species accumulated different amounts of metals. However, the differences were not statistically different at p < 0.05. There is a significant correlation (p < 0.05) for Cd concentration in water. The concentrations of Pb in sampling points 3 and 4 as well as Cd, Mn and Fe in all six sampling points exceeds the World Health Organization (WHO) limits for drinking water. Levels of metals obtained for sediments are within the range reported for Nigeria’s river sediments. Based on this study, the human risks for heavy metals in the harvested fish species from the Ogun river catchments, Ketu, are low for now as the concentrations were below the recommended Food and Agriculture Organization (FAO) maximum limits for Pb (0.5 mg/Kg), Cd (0.5 mg/Kg), and Zn (30 mg/Kg) in fish.