Biological treatment of dye wastewaters using an anaerobic-oxic system

Three dye solutions, namely, C.I. Acid Yellow 17, C.I. Basic Blue 3, and C.I. Basic Red 2, were treated in an upflow anaerobic sludge blanket (UASB) reactor followed by a semi-continuous aerobic activated sludge tank. When hydraulic retention time was about 12 hours, no significant color removal was observed in the aerobic stage. In the anaerobic stage, Acid Yellow 17, Basic Blue 3, and Basic Red 2 were removed by 20%, 72%, and 78%, respectively. To treat wastewater from a dye manufacturing factory with COD concentration of 1200 mg/l and Color of 500 degree (dilution factor), an UASB reactor (4.5 liters) and an activated sludge tank (5 liters, adjustable), COD and color were removed by more than 83% and 90% at a COD loading rate of 5.3 kg COD/m³-day in the anaerobic stage, and at the hydraulic retention time of 6-10 hours for the anaerobic stage and 6.5 for the aerobic stage. The anaerobic stage of the A/O system removes both color and COD. In addition, it also improves biodegradability of dyes for further aerobic treatment.     

In vivo chronic effect of dimethoate and deltamethrin on rabbits

The in vivo effect of dimethoate and deltamethrin on body and organ weights, serum proteins and on plasma acetylcholinesterase (AChE), aromatic esterase and ATPase were examined in growing male rabbits throughout five months period. Both compounds had no significant effect on body weight; however, adrenal, testis & pituitary weights decreased (P less than 0.01); the liver and spleen weights increased (P less than 0.01) in a dose dependent manner. Serum total proteins and globulin decreased (P less than 0.01) in a dose dependent trend, while serum albumin was not greatly affected. AChE activity was increased (P less than 0.01) after 1 month of treatment with the two doses of dimethoate and deltamethrin; thereafter, AChE activity showed 40% inhibition of the control level. The activity of aromatic esterase increased markedly after the first month, then declined gradually until the fifth month. High dose of dimethoate markedly inhibited this enzyme particularly after the 5th month of treatment. Both doses of deltamethrin increased ATPase activity after the first month of treatment, then the ATPase activity was normal. Dimethoate inhibited ATPase particularly at the end of treatment in a dose dependent manner.     

Study of using microfiltration and reverse osmosis membrane technologies for reclaiming cooling water in the power industry.

A study of using dual membrane technologies, microfiltration (MF) and reverse osmosis (RO), for reclaiming blowdown of the cooling tower was conducted at ZJK power plant, Hebei province, China. The study shows that the combined MF-RO system can effectively reduce water consumption in the power industry. The results indicate that MF process is capable of producing a filtrate suitable for RO treatment and achieving a silt density index (SDI) less than 2, turbidity of 0.2 NTU. The water quality of RO effluent is very good with an average conductivity of about 40 micros/cm and rejection of 98%. The product water is suitable for injection into the cooling tower to counteract with cooling water intrusion. After adopting this system, water-saving effectiveness as expressed in terms of cycles of concentration could be increased from 2.5-2.8 times to 5 times.     

Effects of metabolites of benzo(a)pyrene on unschedule DNA synthesis in BALB/3T3 cell line

In order to explore the damage from metabolites of benzo(a)pyrene on DNA of mammalian cells, the effects of four metabolites of benzo(a)pyrene (anti-BPDE, syn-BPDE, 3-OH-BP and 9-OH-BP) on synthesis of DNA and unschedule DNA synthesis (UDS) in BALB/3T3 cells were assayed, by methods of single-labeling and double-labeling. The results showed that all of the four agents were able to increase the synthesis of DNA, but only three of them (apart from syn-BPDE) induced UDS in BALB/3T3 cells. The above indicates that the metabolites of benzo(a)pyrene are able to damage DNA in BALB/3T3 cells, and that this effect may be relative to the sterical structure of metabolites of benzo(a)pyrene.     

Bioaccumulation and physiological effects of excess lead in a roadside pioneer species Sonchus oleraceus L

Seedlings of Sonchus oleraceus L. were transplanted to soil supplied with lead acetate at dosages of 0, 800, 1600 and 3200 mg kg(-1) DW. Measures of chlorophyll content, peroxidase (POD) activity, shoot length, biomass and Pb content in the plant tissues were obtained from the experimental plants. With increasing amounts of Pb in the soil, the chlorophyll content, shoot length and biomass decreased, while POD activity and Pb content in the plant tissues increased. At 3200 mg kg(-1) Pb treatment, Pb content in the plant leaf, stem and root were 65.67, 149.82 and 1113.24 mg kg(-1), respectively. Only at 3200 mg kg(-1) Pb treatment did chlorophyll content, shoot length and biomass significantly increase by 18, 15 and 44%, respectively, while POD decreased by 39% over the control. The potential of applying this species in phytoremediation of Pb contaminated roadside soils and thus restoration of the roadside vegetation are discussed.     

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

Sample purification for analysis of organochlorine pesticides in sediment and fish muscle

The methods of sample purification for determinations of organochlorine pesticides (OCPs) in sediment and fish muscle were investigated in this study. A two-step procedure with preliminary cleanup and florisil column fraction was adopted. The working conditions of florisil column were firstly optimized. As to preliminary cleanup, liquid-liquid extraction by mixture of dimethyl formamide (DMF) and hexane and sulphonation by concentrated sulfuric acid were applied respectively and compared for the studied samples. The results indicated that liquid-liquid distribution could effectively separate lipids from fish muscle extracts, while failed in elimination of chlorophyll extracted from the relicts of hydrophytes in the sediment sample. In view of the sample appearance and clarity of gas chromatogram, sulphonation was more suitable to purify the sediment sample, however, the recoveries of the spiked standards were poor. The use of eluting solvent with stronger polarity could improve the corresponding recoveries significantly. Due to complete loss of Dieldrin, Endrin, and Endrin aldehyde after sulphonation, this pretreatment was improper to the three components. Sulfur, as the particular disturbing element in sediment, could be removed sufficiently by addition of activated copper powder. The relevant detection limits of the selected methods for OCPs in the studied substrates were also provided.     

Halogen production from aqueous tropospheric particles

Box model studies have been performed to study the role of aqueous phase chemistry with regard to halogen activation for marine and urban clouds and the marine aerosol as well. Different chemical pathways leading to halogen activation in diluted cloud droplets and highly concentrated sea salt aerosol particles are investigated. The concentration of halides in cloud droplets is significantly smaller than in sea-salt particles, and hence different reaction sequences control the overall chemical conversions. In diluted droplets radical chemistry involving OH, NO(3), Cl/Cl(2)(-)/ClOH(-), and Br/Br(2)(-)/BrOH(-) gains in importance and pH independent pathways lead to the release of halogens from the particle phase whereas the chemistry in aerosol particles with high electrolyte concentrations is controlled by non-radical reactions at high ionic strengths and relatively low pH values.For the simulation of halogen activation in tropospheric clouds and aqueous aerosol particles in different environments a halogen module was developed including both gas and aqueous phase processes of halogen containing species. This module is coupled to a base mechanism consisting of RACM (Regional Atmospheric Chemistry Mechanism) and the Chemical Aqueous Phase Radical Mechanism CAPRAM 2.4 (MODAC-mechanism). Phase exchange is described by the resistance model by Chemistry of Multiphase Atmospheric Systems, NATO ASI Series, 1986.It can be shown that under cloud conditions the bromine atom is mainly produced by OH initiated reactions, i.e. its concentration maximum is reached at noon. In contrast, the concentration level of chlorine atoms is linked to NO(3) radical chemistry leading to a smaller amplitude between day and night time concentrations.The contribution of radical processes to halogen atom formation in the particle phase is evident, e.g. by halogen atoms which undergo direct phase transfer. Furthermore, the application of the multiphase model for initial concentrations for sea-salt aerosols shows that the particle phase can act as a main source of halogen containing molecules (Cl(2), BrCl, Br(2)) which are photolysed in the gas phase to yield halogen atoms (about 70% of all Cl sources and more than 99% for Br).