Groundwater vulnerability assessment for the Banyas Catchment of the Syrian coastal area using GIS and the RISKE method

Vulnerability assessment to delineate areas that are more susceptible to contamination from anthropogenic sources has become an important element for sensible resource management and landuse planning. This contribution aims at estimating aquifer vulnerability by applying the RISKE model in Banyas Catchment Area (BCA), Tartous Prefecture, west Syria. An additional objective is to demonstrate the combined use of the RISKE model and a geographical information system (GIS) as an effective method for groundwater pollution risk assessment. The RISKE model uses five environmental parameters (Rock of aquifer media, Infiltration, Soil media, Karst, and Epikarst) to characterize the hydro-geological setting and evaluate aquifer vulnerability. The elevated eastern and low western part of the study area was dominated by high vulnerability classes, while the middle part was characterized by moderate vulnerability classes. Based on the vulnerability analysis, it was found that 2% and 39% of BCA is under low and high vulnerability to groundwater contamination, respectively, while more than 52% and 5% of the area of BCA can be designated as an area of moderate and very high vulnerability to groundwater contamination, respectively. The GIS technique has provided an efficient environment for analyses and high capabilities of handling a large amount of spatial data.     

A comprehensive review of hydrophobic silica and composite aerogels: synthesis,properties and recent progress towards environmental remediation and biomedical applications

Environmental Science and Pollution Research - The hydrophobicity of silica and composite aerogels has enabled them to acquire applications in a variety of fields. With remarkable structural,...     

How do climatic change,cereal crops and livestock production interact with carbon emissions? Updated evidence from China

Environmental Science and Pollution Research - Carbon dioxide emission and climatic variation have a detrimental influence on the atmosphere as well as on agriculture production. The key aim of the...     

Evaluation of fresh and stored rainwater quality in fluoride and arsenic endemic area of Thar Desert,Pakistan

In the current study, the chemistry of fresh and stored rainwater of Thar Desert, Pakistan, was estimated during two consecutive monsoon periods. The present research deals with the variation in physicochemical parameters, total arsenic (As^t), inorganic arsenic species (Asⁱ, As^V, As^III), and fluoride (F^?) in stored rainwater (SRW) at different time intervals (1 week to 3 months). The pH of fresh rainwater (FRW) samples showed slightly acidic to neutral in nature (6.08–7.06) which were inconsistent with the reference pH value (5.6) of rainwater. The resulted data indicated that As^t and F^? levels in SRW were enhanced with time duration. The levels of As^t and F^? in SRW after different time intervals were found in the range of 194–683 μg/L and 10–35.4 mg/L, respectively. The values of As^t and F^? were 20–70 and 7–24 times higher than those of WHO permissible limits, 10 μg/L and 1.5 mg/L, respectively. The As^III was dominant species in SRW, which corresponds to >60 % of Asⁱ. The characteristics of the SRW revealed an unacceptable quality to consume for drinking and agricultural purposes in the studied area.     

Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors

The industrial sector is the biggest electricity consumer in Malaysia. Electric motors account for more than 45% of the electricity consumption in the industrial sector in the country. Therefore, it is very important to implement energy efficiency standards for electric motors to reduce energy consumption growth in this sector. This paper attempts to calculate the cost efficiency analysis and emission reduction by implementing energy efficiency standards for electric motor in Malaysia. The energy efficiency standards are proposed based on the efficiency of electric motors from survey data. The study examines the potential energy, economical and environmental impacts of the implementation of energy efficiency standards for electric motors in three scenarios i.e. 0.5%, 1.0% and 1.5% of standards efficiency improvement. Standards also enable consumers to reduce their electricity bill and contribute to a positive environmental impact.     

House dust as a source of human exposure to polybrominated diphenyl ethers in Kuwait

This study reports concentrations of polybrominated diphenyl ethers (PBDEs) in dust samples collected from 17 homes in Kuwait. PBDEs were measured in all homes investigated with mean summation operatorPBDEs concentration ranging from 1 to 393 ng g(-1), with a geometric mean of 76 ng g(-1). The dominant congener in all samples was BDE 209 constituting ca. 85% of the summationPBDEs followed by BDE 99 (5%), BDE 47 (4.5%), and BDE 183 (2%). The congener mixture in dust is dominated by those in deca and penta formulations. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non-dietary exposure based on mean PBDE levels were 14.8 and 1.5 ng day(-1) for children and adults, respectively. The 10-fold difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors. The ubiquitous distribution of these chemicals as noted in this study highlights the fact that we are continuously exposed to low doses of chemicals in the indoor environment.     

The development of low cost adsorbents from clay and waste materials: a review

Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO₂) emission being released into the atmosphere. CO₂ emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO₂ emissions has drawn much attention in recent years, the development of CO₂ capture technology has become a necessity. Although CO₂ adsorbents are still at the early development stage, it has been suggested that CO₂ adsorbents are the most effective technology in controlling CO₂ emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO₂. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO₂ adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO₂ adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO₂ adsorption capacity. In the last section, the current status of CO₂ adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO₂ adsorbents.     

CLIMATOLOGICAL WATERSHED CALIBRATION1

ABSTRACT: This study tests the hypothesis that climatic data can be used to develop a watershed model so that stream flow changes following forest harvest can be determined. Measured independent variables were precipitation, daily maximum and minimum temperature, and concurrent relative humidity. Computed variables were humidity deficit, saturated vapor pressure, and ambient vapor pressure. These climatic variables were combined to compute a monthly evaporation index. Finally, the evaporation index and monthly precipitation were regressed with measured monthly stream flow and the monthly estimates of stream flow were combined for the hydrologic year. A regression of predicted versus measured annual stream flow had a standard error of 1.5 inches (within 6.1 percent of the measured value). When 10, 15, and 20 years of data were used to develop the regression equations, predicted minus measured stream flow for the last 7 years of record (1972–1978) were within 16.8, 11.5, and 9.7 percent of the measured mean, respectively. Although single watershed calibration can be used in special conditions, the paired watershed approach is expected to remain the preferred method for determining the effects of forest management on the water resource.