Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

Environmental Science and Pollution Research - The shortage of potable water is a global problem. One of the techniques used to participate solving this problem is the solar distiller. The main...     

Factors influencing the implementation of a safety management system for construction sites

The objective of the study was to determine the influential safety factors that governed the success of a safety management system for construction sites. The number of incidences among construction workers and the level of awareness on matters concerning safety were also determined. The study involved a self-administered three-part questionnaire among the workers and interviews with industry experts involved in brick-laying, concreting and in related assorted trades. Part A of the questionnaire concerned personal particulars, Part B involved training and experience and Part C was based on 28 industry-accepted safety factor elements. The construction sites ranged from high rise buildings, landed houses and infrastructure renovation. The sample size was 275. From the survey it was found that the most influential safety factor was personal awareness followed closely by communication. Suggestions and recommendations on equipment design and improved work practices and procedures to improve the efficiency and productivity of construction workers were proposed. Management was urged to get their workers better informed about safety matters.     

Uptake of heavy metals by some edible vegetables irrigated using wastewater: a preliminary study in Accra, Ghana

The heavy metals (Fe, Zn, Pb, Ni, Cr, Co, and Cd) burden in wastewater, soil, and vegetable samples from a wastewater irrigated farm located at KorleBu, Accra has been investigated. Flame atomic absorption spectrometry after microwave digestion using a combination of HNO₃, HCl, and H₂O₂ (for water), and HNO₃ and HCl (for soil and vegetables). The mean concentrations (in milligrams per kilogram) of heavy metals in the soil samples were in the order of Fe (171?±?5.22)?>?Zn (36.06?±?4.54)?>?Pb (33.35?±?35.62)?>?Ni (6.31?±?8.15)?>?Cr (3.40?±?3.63)?>?Co (1.36?±?0.31)?>?Cd (0.43?±?0.24), while the vegetables were in the order of Fe (183.11?±?161.2)?>?Zn (5.38?±?3.50)?>?Ni (3.52?±?1.27)?>?Pb (2.49?±?1.81)?>?Cr (1.46?±?0.51)?>?Co (0.66?±?0.25)?>?Cd (0.36?±?0.15). The bioconcentration factors suggest environmental monitoring for the heavy metals as follows: Cd (0.828), Cr (0.431), Ni (0.558), Co (0.485), and Fe (1.067). Estimated daily intakes were very low for both children and adults except Fe (0.767 mg/kg/day) in children. The population that consume vegetables from the study area were, however, estimated to be safe based on the results obtained from the health risk index, which were all?<?<1. The sodium absorption ratio according to FAO (1985) classifications indicate that the wastewater in the study area is unsuitable for irrigation purposes.     

Discriminant analysis for the prediction of sand mass distribution in an urban stormwater holding pond using simulated depth average flow velocity data

The approach of this paper is to predict the sand mass distribution in an urban stormwater holding pond at the Stormwater Management And Road Tunnel (SMART) Control Centre, Malaysia, using simulated depth average floodwater velocity diverted into the holding during storm events. Discriminant analysis (DA) was applied to derive the classification function to spatially distinguish areas of relatively high and low sand mass compositions based on the simulated water velocity variations at corresponding locations of gravimetrically measured sand mass composition of surface sediment samples. Three inflow parameter values, 16, 40 and 80 m³ s^?1, representing diverted floodwater discharge for three storm event conditions were fixed as input parameters of the hydrodynamic model. The sand (grain size?>?0.063 mm) mass composition of the surface sediment measured at 29 sampling locations ranges from 3.7 to 45.5 %. The sampling locations of the surface sediment were spatially clustered into two groups based on the sand mass composition. The sand mass composition of group 1 is relatively lower (3.69 to 12.20 %) compared to group 2 (16.90 to 45.55 %). Two Fisher’s linear discriminant functions, F ₁ and F ₂, were generated to predict areas; both consist of relatively higher and lower sand mass compositions based on the relationship between the simulated flow velocity and the measured surface sand composition at corresponding sampling locations. F ₁?=??9.405?+?4232.119?×?A???1795.805?×?B?+?281.224?×?C, and F ₂?=??2.842?+?2725.137?×?A???1307.688?×?B?+?231.353?×?C. A, B and C represent the simulated flow velocity generated by inflow parameter values of 16, 40 and 80 m³ s^?1, respectively. The model correctly predicts 88.9 and 100.0 % of sampling locations consisting of relatively high and low sand mass percentages, respectively, with the cross-validated classification showing that, overall, 82.8 % are correctly classified. The model predicts that 31.4 % of the model domain areas consist of high-sand mass composition areas and the remaining 68.6 % comprise low-sand mass composition areas.     

Assessment of cylindrospermopsin toxin in an arid Saudi lake containing dense cyanobacterial bloom

This study reports the presence of the cyanobacterial toxin cylindrospermopisn (CYN) and its producer Cylindrospermopsis raciborskii for the first time in Saudi freshwater sources. C. raciborskii was found in Gazan Dam Lake water with two morphotypes (coiled and straight). The appearance and cell density of this species was significantly positively related to high temperature and high ammonium concentrations, and negatively with nitrate and phosphate concentrations in the lake. Intracellular concentrations of CYN (4–173 μg L^?1) were associated with C. raciborskii rather than other cyanobacteria with a maximal value obtained in June 2011, coinciding with the highest bloom of this species (19?×?10⁷ trichome L^?1). CYN cell quotas (0.6–14.6 pg cell^?1) varied significantly along the study period and correlated with most environmental factors. The results of ELISA and liquid chromatography-mass spectrometry proved that the CYN production by strains of this species was isolated from this lake during the present study, with an amount reaching 568 μg g^?1. Extracellular CYN was also detected in cell-free lake water at concentrations 0.03–23.3 μg L^?1, exceeding the drinking water guideline value of 1 μg L^?1 during the Apr–Jul period. As this lake is an important source for drinking and irrigation waters, CYN monitoring should be included in the environmental and health risk assessment plans of these water bodies.     

Evaluation of engine performance and exhaust emission characteristics in a diesel engine using isobutanol— Calophyllum inophyllum biodiesel—diesel ternary blends

Environmental Science and Pollution Research - The availability of natural energy resources and the environmental issues are the most significant issues that are often highlighted by the world...     

High thiabendazole fungicide uptake using Cellana tramoserica shells modified by copper: characterization,adsorption mechanism,and optimization using CCD-RSM approach

Environmental Science and Pollution Research - In this paper, Cellana tramoserica (CT) shells were modified by copper and used as an adsorbent to remove thiabendazole (TBZ) from aqueous media. The...     

Selenium content of rice,mixed plant foods and fish from Bangladesh

Static and dynamic adsorption studies of Co (II) ions have been undertaken at fixed pH and ionic strength taking binary biopolymeric beads of cross-linked calcium alginate and carboxy methylcellulose as biosorbents. The adsorption data were applied to Langmuir and Freundlich isotherm equations and various static parameters were calculated. The dynamic nature of adsorption process was quantified in terms of several kinetic constants such as rate constants for adsorption (K) and Lagergreen rate constant (K _ad). The influence of various experimental parameters such as solid-to-liquid ratio, pH, and temperature, the presence of salts and chemical composition of biopolymeric beads were investigated on the adsorption of cobalt ions.     

A review of bioretention components and nutrient removal under different climates—future directions for tropics

Bioretention systems have been implemented as stormwater best management practices (BMPs) worldwide to treat non-point sources pollution. Due to insufficient research, the design guidelines for bioretention systems in tropical countries are modeled after those of temperate countries. However, climatic factors and stormwater runoff characteristics are the two key factors affecting the capacity of bioretention system. This paper reviews and compares the stormwater runoff characteristics, bioretention components, pollutant removal requirements, and applications of bioretention systems in temperate and tropical countries. Suggestions are given for bioretention components in the tropics, including elimination of mulch layer and submerged zone. More research is required to identify suitable additives for filter media, study tropical shrubs application while avoiding using grass and sedges, explore function of soil faunas, and adopt final discharged pollutants concentration (mg/L) on top of percentage removal (%) in bioretention design guidelines.

     

Application of chemometrics in understanding the spatial distribution of human pharmaceuticals in surface water

The growing interest in the environmental occurrence of veterinary and human pharmaceuticals is essentially due to their possible health implications to humans and ecosystem. This study assesses the occurrence of human pharmaceuticals in a Malaysian tropical aquatic environment taking a chemometric approach using cluster analysis, discriminant analysis and principal component analysis. Water samples were collected from seven sampling stations along the heavily populated Langat River basin on the west coast of peninsular Malaysia and its main tributaries. Water samples were extracted using solid-phase extraction and analyzed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for 18 pharmaceuticals and one metabolite, which cover a range of six therapeutic classes widely consumed in Malaysia. Cluster analysis was applied to group both pharmaceutical pollutants and sampling stations. Cluster analysis successfully clustered sampling stations and pollutants into three major clusters. Discriminant analysis was applied to identify those pollutants which had a significant impact in the definition of clusters. Finally, principal component analysis using a three-component model determined the constitution and data variance explained by each of the three main principal components.