Sampling of airborne polycyclic aromatic hydrocarbons with semipermeable membrane devices

Semipermeable membrane devices (SPMDs) are nowadays used as passive samplers of organic pollutants. The knowledge of the sampling rate values (R_S) of each substance trapped on membranes is necessary to calculate their average concentration. Here we calculate R_S values for 16 polycyclic aromatic hydrocarbons using the comparison of active sampling method results and the amounts sequestered by SPMDs at varying exposure times.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organized by Dr. Branimir Jovancicevic.     

Pressurised liquid-liquid extraction. An approach to the removal of inorganic non-metal species from used industrial oils

Modified pressurised hot water is used for the development of a high pressure liquid-liquid extraction method for the decontamination of used industrial oils from inorganic non-metal species (chlorine, fluorine and sulphur). The oils were subjected to dynamic extraction with water modified with 5% v/v HNO3 at 200 degrees C as extractant. Under these working conditions the analytes were transferred to the aqueous phase. Spontaneous separation of the two immiscible liquid phases (the used oil and extract) takes place in the collection flask after extraction. The treated and untreated oil samples were oxidised and the chloride, fluoride and sulphate thus formed were determined by ion-chromatography. The method was applied to four oil samples from different locations in Spain. A residence time of approximately =10 min provided oil samples from which 88.3%, 89.4% and 89.4% of chloride, fluoride and sulphate, respectively, have been removed with respect to the initial concentration of each analyte in the oil. The repeatability, expressed as relative standard deviation (RSD), was of 11.9%, 13.7% and 7.2% for Cl(-), F(-) and SO4(2-), respectively; whilst the within-laboratory reproducibility yielded RSDs of 6.2%, 7.9% and 6.2% for the same analytes. The proposed approach has proved to be efficient, simple, easily transferable to industrial scale, cheap, fast and environmentally friendly.     

Photodegradation of the herbicide Norflurazon sensitised by Riboflavin. A kinetic and mechanistic study

The kinetics and mechanism of the Riboflavin (Rf)-promoted photochemical degradation with visible light of the herbicide Norflurazon (NF) has been studied by time-resolved and stationary techniques. Using light of wavelength higher than 400 nm--a region where NF is totally transparent--and with concentrations of Rf and NF of ca. 0.02 and 1 mM, respectively, only the excited triplet state of Rf ((3)Rf*) is quenched by NF, in competition with dissolved ground state triplet oxygen, O(2)((3)Sigma(g)(-)). NF degradation mainly occurs by reaction with superoxide radical anion O(2)(-) formed through two electron transfer steps: from NF to (3)Rf*, yielding Rf radical anion, and from this anion to O(2)((3)Sigma(g)(-)), regenerating ground state Rf. Although singlet molecular oxygen is also produced, NF only quenches this oxidative species in a physical mode. The global result is the photoprotection of the sensitiser and the photodegradation of NF.