Smoke alleviates adverse effects induced by stress on rice

Smoke and salinity are environmental hazards. Smoke produced DNA damage, inflammatory, and oxidative stress in humans while salinity reduced plant yield. However, smoke from plants is beneficial towards plant growth. In this study, smoke of two plants, Buhania varegata (1:1000 and 1:5000 dilutions (v/v)) and Cymbopogon jwarancusa (1:500 and 1:1000), were used to determine effects on different physiological and biochemical parameters in rice Basmati-385 (B-385) and Shaheen Basmati under different saline concentrations (control: 50, 100, and 150 mM). With increasing salinity, germination%, seedling growth, K⁺, Ca⁺, cell membrane stability, and total nitrogen and protein contents were decreased while Na⁺ content increased. However, seeds primed with different dilution of smoke significantly diminished the adverse effects of salinity and shown to produce positive responses in all of the above parameters. The most effective dilutions were 1:5000 for Buhania varegata and C-500 for Cymbopogon jwarancusa. It seems that priming with plant smoke solution is a potent stimulant for plant growth exerting a significant role in physiology and biochemistry of rice plants under saline condition.     

Application of electrochemical reactor divided by cellulosic membrane for optimized simultaneous removal of phenols,chromium, and ammonia from tannery effluents

The post treatment of simulated tannery wastewater was evaluated in an electrochemical oxidation process under galvanostatic conditions. A continuous flow reactor divided by a cellulosic membrane consisted of Ti/SnO₂–Sb anodes and iron cathodes was used. Central composite design and response surface methodology (RSM) were applied to investigate the effects of six operational parameters, namely initial concentration of total phenols (TPh), total chromium (TCr), total ammonia nitrogen (TAN), flow rate (Q), current intensity (I), and electrode surface area (A). Effectiveness of the innovative cellulosic membrane was proven by considerable pH variations in the anolyte and catholyte chambers. A faster removal rate was observed for TPh and TAN, followed by TCr. The treatment level was very sensitive to Q and I in the studied ranges. RSM showed the removal efficiencies of 78.14%, 63.42%, and 86.09% for TPh, TCr, and TAN, respectively, are achieved under optimal conditions with consumption of only 9.03 kWh m^?3 electrical energy. Chlorinated compounds such as chloroform, 2,4-dichlorophenol, and chlorobenzene were detected as the degradation intermediates. According to the obtained results, electrolysis in the divided cell with cellulosic membrane is a practical, cost-effective method for advanced treatment of tannery effluents.     

Rheological and Thermal Properties of Levan from Bacillus mojavensis

Journal of Polymers and the Environment - Media composition and culture conditions for levan production by Bacillus mojavensis (BM-levan) were optimized using Plackett–Burman and Box-Behnken...     

Tropospheric Ozone in Tehran,Iran, during the last 20 years

Environmental Geochemistry and Health - Air pollution and its effects on human health and the environment are one of the main concerns in urban areas. This study focuses on the distribution and...     

Effect of biocides on the precipitation of calcium fluoride in the presence of anionic copolymeric inhibitors

The inhibitory efficiency of anionic copolymers and the effect of the biocides sodium hypochlorite, glutaraldehyde, and tris(hydroxymethyl)nitromethane on the precipitation behavior of calcium fluoride (CaF₂) were studied. The efficiency of polymeric inhibitors was traced from conductivity measurements by using half-life (t_1/2) method. X-ray diffraction parameters have been measured for calcium fluoride scale minerals. An anionic copolymer (K-798) acts as one of the best inhibitors for the precipitation process of the calcium fluoride in water as compared to K-775. It is assigned to the fact that the copolymer (K-798) contains both sulfonic acid and sulfonated styrene groups while the polymer (K-775) having only the sulfonic acid group. It was further observed that the biocides have no appreciable effect on the performance of the anionic polymeric inhibitors.     

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C₅–C₃₄) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs = 0.10–1.10 ng L⁻¹, r² = 0.9940–0.9994) and for soil samples (LODs = 0.10–0.77 ng kg⁻¹, r² = 0.9946–0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.     

Flows across high aspect ratio street canyons: Reynolds number independence revisited

The Reynolds number for flow in a street canyon, Re?=?U_refH/ν (where U_ref is a reference velocity, H the street canyon height, and ν the kinematic viscosity), cannot be matched between reduced-scale experiments and full-scale field measurements. This mismatch is often circumvented by satisfying the Re independence criterion, which states that above a critical Re (Re_c), the flow field remains invariant with Re. Re_c?=?11,000 is often adopted in reduced-scale experiments. In deep street canyons with height-to-width aspect ratio ≥?1.5, reduced-scale experiments have shown two recirculation vortices induced by the mean flows, but full-scale field measurements have observed only one vortex. We investigated this discrepancy by conducting water channel experiments with Re between 10⁴ and 10⁵ at three aspect ratios. The canyons with aspect ratio 1.0 have Re_c?=?11,000, the canyons with aspect ratio 1.5 have Re_c between 31,000 and 58,000, while the canyons with aspect ratio 2.0 have Re_c between 57,000 and 87,000. Therefore, the widely adopted Re_c?=?11,000 is not applicable for canyons with aspect ratio greater than 1.5. Our results also confirm that there is only one vortex in deep canyons at high Re. This single-vortex flow regime could change our fundamental understanding of deep canyons, which are often assumed to exhibit multiple-vortex flow regimes. Applications such as numerical model validation based on the multiple-vortex regime should be revisited. Our experimental data with Re up to 10⁵ could be used to validate numerical models at high Re.     

High levels of maternal serum alpha-fetoprotein and human chorionic gonadotrophins leading to the diagnosis of combined neural tube defect and partial mole

A case of combined partial mole and neural tube defect is presented. The detection of high levels of both maternal serum (MS) alpha-fetoprotein (AFP) and human chorionic gonadotrophin (hCG) during the second trimester led to the ultrasonic demonstration of anencephaly, omphalocele, and partial mole. This is the first report of combined elevation of MSAFP and MShCG.     

The mobile source effect on curbside 1,3-butadiene,benzene, and particle-bound polycyclic aromatic hydrocarbons assessed at a tollbooth

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.-3 a.m.) with a mean of 2 microg/m3 (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.-9 a.m.) with a mean of 11.9 microg/m3 (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 microg/m3 (SD = 3.1, n = 7) to 22.3 microg/m3 (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m3. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest > 2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Sequential extraction of heavy metals during composting of sewage sludge

The major limitation of soil application of sewage sludge compost is the total heavy metal contents and their bioavailability to the soil-plant system. This study was conducted to determine the heavy metal speciation and the influence of changing the physico-chemical properties of the medium in the course of composting on the concentrations, bioavailability or chemical forms of Cu, Zn, Pb and Ni in sewage sludge. Principal physical and chemical properties and FTIR spectroscopical characterization of sludge compost during treatment show the stability and maturity of end product. The total metal contents in the final compost were much lower than the limit values of composts to be used as good soil fertilizer. Furthermore, it was observed by using a sequential extraction procedure in sludge compost at different steps of treatment, that a large proportion of the heavy metals were associated to the residual fraction (70-80%) and more resistant fractions to extraction X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of metals bound to bioavailable fractions X-(KNO3+H2O). Heavy metal distribution and bioavailability show some changes during composting depending on the metal itself and the physico-chemical properties of the medium. Bioavailable fractions of all elements tend to decrease except Ni-H2O. Zn and mainly Cu present more affinity to organic and carbonate fractions. In contrast, Pb is usually preferentially bound to sulfide forms X-HNO3. Nickel shows a significant decrease of organic form. Significant degrees of correlation were found between heavy metal fractions and changes of some selected variables (e.g. pH, ash, organic matter, humic substance) during the course of composting. Mobile fractions of metals are poorly predictable from the total content. The R2 value was significantly increased by the inclusion of other variables such as the amount of organic matter (OM) and pH.