Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.     

Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

Visible light responsive N-F-codoped TiO2 photocatalysts for the degradation of 4-chlorophenol

Visible light responsive N-F-codoped TiO₂ photocatalysts exhibit a higher catalytic activity than N-doped TiO₂ for the degradation of 4-chlorophenol due to the synergistic effect of nonmetal elements.     

Complete catalytic oxidation of o-xylene over Ce02 nanocubes

The activities of CeO2 nanocubes calcined at different temperatures were tested for catalytic oxidation of o-xylene. Using CeO2 nanocubes as catalysts, complete catalytic oxidation of o-xylene was achieved below 210℃. The CeO2 nanomaterials were characterized by means of BET, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). From the TEM images, all Ce02 nanocubes displayed cubic morphology irrespective of calcination temperature. The HRTEM images revealed that these nanocubes were enclosed by reactive {001}planes, which may contribute to the intrinsically catalytic property of o-xylene oxidation. The higher activity of Ce02 nanocubes calcined at 550℃ than those calcined at above 550℃ was attributed to their smaller crystallite size and larger surface area. The influences of reaction conditions were also studied, which found that a higher reaction temperature was necessary for complete catalytic oxidation of o-xylene at higher weight hourly space velocity (WHSV) and o-xylene concentration.     

Decolorization of dye solutions with Ruditapes philippinarum conglutination mud and the isolated bacteria

Application of Ruditapes Philippinarum conglutination mud (RPM) for decolorizing synthetic dye solutions was studied. RPM showed good activity for decolorization of Methylene Blue, Crystal Violet, Malachite Green, and Ink Blue. The amount of the RPM had great effect on the decoloration rate of the dye solutions. However, the decoloration rate did not continue to increase when the amount of mud exceeded the optimum dose. The temperature of the dye solution had a remarkable effect on the decolorization rate of Ink Blue solution, but had little effect on the other three dye solutions. The initial pH of the dye solutions evidently affected the decolorization rate of Malachite Green solution, but had less effect on the other three. The decolorization rate of the dye solutions increased significantly with treatment time within 8 hr, but tended to be steady after 8 hr for Methylene Blue, Crystal Violet and Malachite Green solutions, and after 12 hr for Ink Blue solution. The decolorization efficiencies for the four dye solutions under the optimum conditions were all above 90%. Seventeen strains screened from RPM showed flocculation ability for kaolin clay suspension. Out of them, the flocculation rate of strain ZHT3-9 and strain ZHT4-13 were up to 88.14% and 86.01%, respectively. ZHT3-9 was studied, and its decolorization rate for Methylene Blue, Crystal Violet, and Malachite Green reached 90.02%, 89.21%, and 80.29%, respectively. By morphological, physiological and biochemical characteristics analysis and 16S rRNA sequencing, the strain ZHT3-9 was identified as Arthrobacter sp.     

Characteristics of nitrogen and phosphorus removal in a sequencing batch reactor

Laboratory scale experiments were conducted to study the characteristics of N and P removal under different influent organic carbon concentration in a sequencing batch reactor (SBR) with simple anaerobic/aerobic operating mode. Experimental results indicated that, under the operating condition of influent N concentration of 89 mg/L and P concentration of 15 mg/L, when the influent C/N ratio increased from 1.5 to 6.9 (influent C/P ratio from 9 to 41), total N and P removal efficiency improved from 50% and 46% to 78% and 96% respectively. Track studies of N, P and other operating parameters demonstrated that N removal of the SBR was realized through simultaneous nitrification and denitrification (SND) in the aeration phase and anoxic denitrificaiton in the filling phase, P removal was accomplished through conventional anaerobic P release and aerobic P taken-up process. Keeping dissolved oxygen (DO) concentration during the first two aeration hours as low as 0.1-0.6 mg/L is essential for the simultaneous occurrences of nitrification, denitrification and P-taken up.     

Microstructures and electrochemical behaviors of the friction stir welding dissimilar weld

By using optical microscope, the microstructures of 5083/6082 friction stir welding (FSW) weld and parent materials were analyzed. Meanwhile, at ambient temperature and in 0.2 mol/L NaHS0₃ and 0.6 mol/L NaCl solutionby gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation, the electrochemical behavior of 5083/6082 friction stir welding weld and parent materials were comparatively investigated by gravimetric test, potentiodynamic polarization curve test, electrochemical impedance spectra (EIS) and scanning electron microscope (SEM) observation. The results indicated that at given processing parameters, the anti-corrosion property of the dissimilar weld was superior to those of the 5083 and 6082 parent materials.     

影响剩余污泥脱水的关键因素研究进展

随着我国城市污水处理的发展,有效减少不断增加的污泥体积日趋重要。明确影响污泥脱水的关键因素,对于提高脱水效率,控制污泥处理成本具有重要的意义。文章讨论了多聚物含量、阳离子浓度、消化/发酵、酸碱条件、粒径大小等因素与污泥脱水性能之间的关系,分析了这些因素影响污泥脱水的内在机理,总结了适合污泥脱水的条件,为城市污泥高效脱水提供了参考。