Fenton试剂-混凝法快速降解熄焦循环水中COD

以Fenton试剂氧化结合混凝法对焦化厂熄焦循环水COD进行快速去除实验,结果证明:当[Fe2+]/[H2O2]为1∶15,初始p H为3,30%H2O24.5 ml/100 ml废水时,反应90 min,COD去除率可达到90%,满足回用标准。但是,此时水的颜色较深,继续调节p H至7,加入Fe C13140 mg/L,PAM(聚丙烯酰胺)5 mg/L,搅拌5 min,静置30 min,COD去除率可达95.4%。Fenton-混凝对低浓度NH3-N几乎没有去除作用,CN-的去除率接近30%。整个处理过程中,有机物的种类和数量发生较大变化,Fenton氧化120 min后,混凝,污水基本接近无色,但仍含有单环芳香族化合物。     

热解含油污泥制备吸附材料浅析

介绍了含油污泥热解技术及热解实验方法,提出热解产生的残渣进行适当处理可成为具有吸附性的材料。进行了含油污泥热解正交实验,得出影响最大的因素分别是热解温度、热解时间、升温速率,并得出最佳的热解温度、热解时间、升温速率等。分析了含油污泥热解的机理,探讨了热解含油污泥制备吸附材料的活化改性,并在此基础上对所制备吸附材料的脱硫性和除油性进行了研究。     

环境管理战略转型研究综述

由于经济社会的发展伴随的环境问题越来越复杂,资源相对不足、环境容量有限越来越突出,环境管理转型问题引起越来越多的国内外学者关注。所谓环境管理转型,是指环境管理思维、策略和方式的转变,是以环境质量为目标导向,从被动应对向主动防控的转变。本文通过文献梳理的方法,综述了国内外学术界对于环境管理战略进行的多角度探讨。通过综述发现,国外学者主要注重环境管理理论研究,如环境管理的模型研究和不同环境管理战略的研究,且国外学者在研究不同环境管理战略时,研究对象多为微观层面的企业组织;而我国学者的研究则主要集中在宏观层面,即从国家的角度来探讨环境管理战略如何完成转型,从而促进我国经济社会的良性发展。现有的国内外研究是环境管理战略相关理论发展和实践推行的重要基础,在环境管理战略研究领域,本文认为还有一些问题需要进一步研究:一是环境管理的转型不仅需要宏观层面的统筹、微观方面的变革,也需要从中观层面来推进,所以中观层面的环境管理研究同样具有重要的现实意义。二是环境管理的转型不仅需要法律手段的支撑、经济手段的配置,也需要公民环保意识的觉醒,所以关于公民环保意识层面的研究也需要加强。     

Determination of Trace Organochlorinated Pesticides and Polychlorinated Biphenyls in Water

A modified steam distillation liquid-liquid extraction (SDE) device is developed for the enrichment of trace organochlorinated pesticides (OCPs) and polychlorinated biphenyls (PCBs) in up to one litre of water samples. One ml of n-hexane is sufficient to extract the analytes. The extract can be analysed directly by a capillary gas chromatography-electron capture detector. The recoveries range from 84.6 to 102.3% for OCPs and 80.5 to 106.2% for PCBs, respectively. Matrice materials such as lipids and humic substances were removed by the SDE method from the extract and no further cleanup and concentration steps were needed.     

Determination of PAHs by On-Line Polarization Synchronous Fluorescence with HPLC

A novel analytical method has been established for on-line simultaneous determination of fluorene and acenaphthene,chrysene and benzo[a]anthracene (B[a]A) by polarization synchronous fluoromet.y (PSF) coupled to high performance liquid chromatography (HPLC). The detection limits were: 0.039, 0.046, 0.016 and 0.042 mgL-1 for fluorene, acenaphthene, chrysene and B[a]A, respectively. The proposed method has been successfisily applied to simultaneous determination of these PAHs in environmental air and marine sediment samples.     

Biodegradation of high molecular weight PAHs using isolated yeast mixtures: application of meta-genomic methods for community structure analyses

Bioaugmentation for the removal of polyaromatic hydrocarbons (PAHs) from wastewater using bacteria and yeasts is considered environment-friendly and a cost-effective technique. The effectiveness of this biodegradation system depends on the stability of inoculated microorganisms and the availability of nutrients. This study is aimed to investigate the removal of high molecular weight (HMW)-PAHs from biologically treated produced water using different biological systems. Three systems, inoculated with activated sludge (AS), the mixture of five yeast strains (MY), and the mixture of AS and the five yeast strains (SY), respectively, were constructed, and their performance for the removal of HMW-PAHs was compared over 10 weeks. The effluent of the biologically treated produced water from an oilfield was used as the influent after chrysene and benzo(a)pyrene were spiked as HMW-PAHs. Polymerase chain reaction-based denaturing gradient gel electrophoresis (PCR-DGGE) and fluorescent in situ hybridization (FISH) techniques were used to examine the changes in the structures and abundances of the bacterial and yeast communities in these three systems. Only SY and MY systems were capable to remove chrysene (90.7 % and 98.5 %, respectively) and benzo(a)pyrene (80.7 % and 95.2 %, respectively). PCR-DGGE analysis confirmed that all of the five yeast strains inoculated remained in the SY and MY systems, while FISH results showed that the relative abundance of yeast in the SY and MY systems (10.6 % to 21.9 %, respectively) were significantly higher than AS system (2.3 % to 7.8 %, respectively). The relative abundances of the catechol 2,3-dioxygenase (C23O) indicated that the copy number ratios of benzene ring cleavage gene C23O in the yeast amended systems were much higher than that in the AS system. In this study, all of the three systems were effective in removing the low molecular weight (LMW)-PAHs, while HMW-PAHs including chrysene and benzo(a)pyrene were efficiently removed by MY and SY systems, not by AS system. The high HMW-PAHs removal in the MY and SY bioaugmentation systems possibly attributed to the inoculation of the mixed yeast culture. By combining the PCR-DGGE results with the FISH analyses, it was found that yeast probably consisting mainly of the five inoculated strains inhabited in the two bioaugmentation systems as a dominant population. The relatively higher performance of the SY system might be attributed to the suspended growth type which permitted a more efficient contact between microbial cells and contaminants. The bioaugmentation systems (SY and MY) were successfully established by inoculating with five nonindigenous yeast strains and demonstrated high performance in removal of HMW-PAHs.     

Rapidly eliminating pathogenic microorganisms in large air space using spraying *OH radicals

A new method for rapidly eliminating pathogenic microorganisms in large air space using spraying *OH radicals is presented in this paper With a physical method of strong electric-field discharge, large numbers of *OH radicals were produced by the oxygen activated particles of O2+, O(1D), O(3P), etc., and the introducing reagent HO2-. The gram-positive bacteria Bacillus subtilis, the gram-negative bacteria Serratia marcescens, and Bacillus spores were used for the eliminating experiments. Results show that the different microorganisms were rapidly killed by *OH radicals with a concentration of 0.8 mg/L and spraying density of 21 microL/m2 within 4 sec. Cell morphological changes were also observed under microscope. The cells of B. subtilis and Bacillus spores in their cellular wall, cellular membrane, or cell protoplasm were greatly destroyed when being exposed to a killing dosage of *OH radicals.     

Urbanisation and human health in China: spatial features and a systemic perspective

Background, aims and scope

Current studies have paid little attention to the dynamism in urban spatial expansion and its possible environmental and health effects or to the health effects of rapid urban environmental change at different points along the urbanisation gradient. This study adopts a public health ecology approach to systematically understand the relationship between urbanisation, urban environmental change and human health in China.

Method

Remote sensing image analysis, based on night light data at five different time periods in recent decades, was used to determine changes to the overall urban area. Through a review of the evidence on the relationships between environmental health, urbanisation and health, we advance a pathway framework for explaining urban human health ecology. The Spearman rank correlation coefficient was used to measure the correlation between disease prevalence and urbanisation level, adding a further dimension to a systemic understanding of urban health.

Results and conclusions

Urban areas have been increasing spatially, but unevenly, in recent decades, with medium and small cities also expanding rapidly in the past decade. Urbanisation and urban expansion result in changes to land use/coverage change, the urban environment and the residents?? lifestyle, which result in human health problems. Regions with the highest urbanisation level were more inclined to have a high prevalence of chronic disease in recent decades. An ecological public health approach provides insights into the multiple types of data which need to be routinely collected if human disease is not to become a barrier to social and economic development.     

Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity

The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K(ma)) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.