一株光合细菌的分离鉴定及其产电特性

采用光照富集及厌氧划线法从污水厂二沉池活性污泥分离到一株光合细菌YC-1,结合菌落特征、细胞形态、活细胞吸收光谱及16S rRNA基因序列分析等对其进行了分类学鉴定,并研究了YC-1在不同光源照射下的产电性能。结果表明,该菌为短杆状,有鞭毛,菌落呈淡粉色,含有大量细菌叶绿素a,16S rRNA基因序列与Rhodopseudomonas palustris DX-1相似度为99%,属于假单胞菌属(Pseudomonas sp.);双室微生物燃料电池的阳极室接种YC-1,并以乙酸钠为底物,铁氰化钾作为阴极电子受体,外载为1 000Ω时,电池稳定运行时输出电压为0.58 V,且输出电压不受光源光谱影响。     

锰铜铈氧化物催化剂氧化NO性能及动力学研究

实验以TiO2为载体采用浸渍法制备CuOx/TiO2、CeOx/TiO2、CuCeOx/TiO2和MnCuCeOx/TiO2催化剂,考察这些催化剂氧化NO活性,探究Cu、Ce摩尔比和添加Mn元素对CuCeOx/TiO2催化剂氧化NO活性的影响,使用扫描电镜观察催化剂表面结构。研究发现,Cu、Ce元素配合后的CuCeOx/TiO2催化剂氧化活性明显好于单独含Cu、Ce的催化剂,当Cu、Ce摩尔比为Cu:Ce=1∶2时,CuCeOx/TiO2催化剂氧化活性最好,在NO浓度500×10-6,O210%,空速为24 000 h-1,350℃时,NO氧化度为0.62;添加Mn元素可以提高CuCeOx/TiO2催化剂低温氧化活性,250℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度为0.53和0.69,300℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度均为0.76;此外,实验还研究了NO在MnCuCe/Ti-3催化剂上反应的动力学方程。     

丝状菌污泥膨胀及其致密过程中菌丝体演替规律

为了探索丝状菌的致密途径、解决丝状菌污泥膨胀的难题,从丝状菌的自身特点及外部条件出发研究了其在污泥膨胀及致密过程中菌丝体的演替规律。研究发现,致密生长的大絮体对丝状菌的种类是有选择性的,那些丝体较弯曲、丝体强度较大、贮存能力强的菌丝体更利于形成聚集态生长。另外,研究表明,不同种类丝状菌的生长势和存贮能力不同,对底物的利用上亦存在着竞争关系。实验中存在的几个菌种对PHB颗粒的存贮能力由高到低依次为:Nostocoida limicolaⅡ、Type 1851、Type 0701、Type 021N型菌体。     

臭氧联用技术深度处理腈纶废水的效果对比

将臭氧分别与超声波、H2O2、紫外光等联用,深度处理干法腈纶生产厂生化池出水,对各种联用技术的处理效果进行了研究。实验结果表明：在进水流量2 L/min、反应时间30 min、臭氧加入量3.5 g/（L?h）的条件下,当超声功率为300 W时,臭氧-超声联用技术的COD去除率为30.0%;当H2O2加入量为0.4 mL/L时,臭氧-H2O2联用技术的COD去除率为50.7%;当紫外灯功率为40 W时,臭氧-紫外光联用技术的COD去除率为49.9%;在各种联用技术中,臭氧-H2O2联用技术的运行成本最低（为7.5 元/t）,且处理后出水COD为143 mg/L,达到《<污水综合排放标准>（GB8978—1996）中石化工业COD标准值修改单》中的一级排放标准。综合考虑,臭氧-H2O2联用技术是深度处理干法腈纶废水的最优工艺。     

Mn/γ-Al2O3催化剂的制备及头孢合成废水的催化臭氧氧化法深度处理

对Mn/γ-Al₂O₃催化剂的制备条件及头孢合成废水的催化臭氧氧化法深度处理工艺条件进行了优化。实验结果表明：以Mn（NO₃）₂溶液为浸渍液,Mn/γ-Al₂O₃催化剂的最优制备条件为浸渍液浓度0.10 mol/L、浸渍时间9 h、焙烧温度400 ℃、焙烧时间2 h;在反应时间为30 min、废水pH为9.0、臭氧通量为4.6 mg/min、催化剂加入量为5 g/L的条件下,当进水COD、BOD₅、ρ（氨氮）和色度分别为220~250 mg/L,8~10 mg/L,10~12 mg/L和60~70倍时,出水COD、BOD₅、ρ（氨氮）和色度的平均去除率分别为53%,30%,33%和93%,出水水质满足GB 21904—2008《化学合成类制药工业水污染物排放标准》的要求。     

Catalytic hydrolysis of urea from wastewater using different aluminas by a fixed bed reactor

In order to find an effective method for treating urea wastewater, the experiments on the hydrolysis of urea in wastewater were conducted in a fixed bed reactor with different aluminas (α-Al₂O₃, γ-Al₂O₃, and η-Al₂O₃) as catalysts respectively in contrast with inert ceramic particle. The results indicate that the three alumina catalysts show obvious catalytic activity for urea hydrolysis at 125 °C. The order of activity is η-Al₂O₃?>?γ-Al₂O₃?>?α-Al₂O₃, and the activity difference increases with increasing temperature. According to the characterization results, surface acidity has little impact on the activity of catalyst. However, it was found that surface basicity of alumina catalyst plays an important role in catalytic hydrolysis of urea, and the activity of catalyst may be also influenced by the basic strength. With η-Al₂O₃ as catalyst, the urea concentration in wastewater is reduced to 4.96 mg/L at a temperature of 165 °C. Moreover, the η-Al₂O₃ shows a good stability for urea hydrolysis. The hydrolysis of urea over η-Al₂O₃ catalyst can evidently reduce the reaction temperature and is promising to replace industrial thermal hydrolysis process.     

Behavior and mechanism of arsenate adsorption on activated natural siderite: evidences from FTIR and XANES analysis

Activated natural siderite (ANS) was used to investigate its characteristics and mechanisms of As(V) adsorption from aqueous solution. Batch tests were carried out to determine effects of contact time, initial As(V) concentration, temperature, pH, background electrolyte, and coexisting anions on As(V) adsorption. Arsenic(V) adsorption on ANS well-fitted pseudo-second-order kinetics. ANS showed a high-adsorption capacity of 2.19 mg/g estimated from Langmuir isotherm at 25 °C. Thermodynamic studies indicated that As(V) adsorption on ANS was spontaneous, favorable, and endothermic. ANS adsorbed As(V) efficiently in a relatively wide pH range between 2.0 and 10.0, although the removal efficiency was slightly higher in acidic conditions than that in basic conditions. Effects of background electrolyte and coexisting anions were not significant within the concentration ranges observed in high As groundwater. Results of XRD and Fe K-edge XANES analysis suggested ANS acted as an Fe(II)/(III) hybrid system, which was quite effective in adsorbing As from aqueous solution. There was no As redox transformation during adsorption, although Fe(II) oxidation occurred in the system. Two infrared bands at 787 and 872 cm^?1 after As(V) adsorption suggested that As(V) should be predominantly adsorbed on ANS via inner-sphere bidendate binuclear surface complexes.     

渗滤液耦合矿化垃圾制备甲烷氧化菌菌液

利用甲烷氧化菌菌液增加材料中甲烷氧化菌的数量,可以得到高甲烷氧化率的填埋场甲烷生物氧化覆盖材料。研究发现,渗滤液原水和渗滤液处理尾水均能促进甲烷氧化菌的生长,可利用渗滤液耦合矿化垃圾混合培养制备甲烷氧化菌菌液用于填埋场甲烷减排。填埋龄长的渗滤液原水有着较好的培养效果,得到的菌液在4 d内最高甲烷氧化速率达到2.68 mL/h,超过甲烷氧化菌培养液(nitrate minimal salt medium,NMS)的实验结果。渗滤液中总氮、无机碳、总有机碳和Ni元素的含量对甲烷氧化菌的培养过程影响较大,适用于甲烷氧化培养的渗滤液应满足:总氮1 400 mg/L,总有机碳55 mg/L,Ni元素0.4 mg/L,总磷含量较高。     

酸性矿井水中和沉淀法除铁优化

针对山西某煤矿高矿化度、高铁酸性矿井水除铁效果差、出水容易返色等问题,采用NaOH中和调pH、曝气及化学氧化等处理工艺进行酸性矿井水中和沉淀法除铁优化实验研究。结果表明,采用NaOH中和沉淀法除铁时,投加中和剂使出水pH达6.7以上时,出水中铁含量低于10 mg/L,满足排放要求。对于本实验废水NaOH所需投加量为2.8 g/L,铁的去除率可达到99.75%;以H2O2对原水进行氧化处理,可迅速将Fe(Ⅱ)氧化成Fe(Ⅲ),其用量与原水中Fe(Ⅱ)的含量成正比。当其用量为1.6 mL/L时,可将原水中的Fe(Ⅱ)完全转化为Fe(Ⅲ),投加中和剂使出水pH达到4.5以上时,能使出水中铁含量满足排放要求。对于实验废水所需的NaOH投加量为2.0 g/L,比直接中和沉淀所需的NaOH用量要节省28.6%。曝气处理对原水中Fe(Ⅱ)的氧化效果不明显。     

微波活化过硫酸钾深度处理印染废水

为了深度处理印染废水生化出水,使其达到工业回用要求,利用微波活化过硫酸钾产生具有强氧化性的硫酸根自由基·SO-4,降解印染废水生化出水中的有机污染物。考察了硫酸亚铁的投加量,过硫酸钾的浓度及pH的影响,并通过对比实验讨论了微波活化作用效果。结果表明,过硫酸钾微波组合能够有效地去除生化出水中的TOC和色度。对于某印染废水生化出水,处理效果在pH=10时最好,当过硫酸钾浓度为14 g/L时,TOC去除率达57.60%,脱色率为98.28%。研究结果表明,过硫酸钾微波组合对于印染废水的深度处理效果良好,有较好的应用前景。