场开挖爆破粉尘粒度分布特征杨房沟水电站料∗

通过分析杨房沟水电站料场开挖爆破粉尘的粒度分布特征,为改进爆破降尘工艺提供粉尘粒度学依据。在料场爆破区、工作平盘、出入沟、最终边帮等处采集粉尘样品,采用激光粒度分布仪测试粉尘样品的分散度;以粉尘粒度分布数据拟合分布函数,表明爆破粉尘的粒度分布函数呈现对数正态分布特征;与经典的罗森·拉姆勒(Rosin?Rammler)分布函数模型对比分析表明,对数正态分布函数用于描述爆破粉尘的粒度分布更加准确。基于对数正态分布函数模型,厘定爆破粉尘粒度分布参数,分析TSP、PM10、PM5、PM2.5及PM1粉尘占全尘的比例,定量表达爆破粉尘粒度分布特征。结果表明：杨房沟水电站料场爆破粉尘具有显著的对数正态分布特征;离爆破中心距离越远,粒度分布范围越窄,对人体有害粉尘占比越大;建议采用爆破粉尘捕捉吸附技术、掺和湿润性抑尘剂的水雾喷洒等降尘措施。     

膜蒸馏技术在石化废水处理领域的应用进展

综述了一种新型分离技术——膜蒸馏技术在石化废水处理领域的应用现状,重点介绍了在高盐度废水处理和挥发性有机物废水处理两个方面的进展;指出膜蒸馏应用过程中存在的主要问题是膜污染;预测了膜蒸馏及其集成技术在废水处理领域的发展前景。     

活性碳纤维吸附处理对硝基苯酚生产废水

采用活性碳纤维(ACF)吸附处理对硝基苯酚(PNP)生产废水,考察了动态吸附和脱附过程.实验结果表明,在298 K、pH 4时,最佳进水流量为0.25 L/h,ACF的有效吸附量为439.3 mg/g,PNP去除率大于99.95%,TOC去除率大于99.5%,脱附率大于99.5%,ACF的吸附--脱附性能稳定.ACF吸附和电解相结合的工艺能有效去除废水中的有害物质,回收利用PNP和氯化钠,实现了PNP的清洁生产.     

聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂对Cd2+吸附性能研究

制备了一种聚(丙烯酸-co-丙烯酰胺)/膨润土/腐植酸钠三维网络凝胶吸附剂,重点考察了吸附剂对Cd2+吸附的pH依赖性、吸附动力学和吸附等温线.结果表明,Cd2+溶液pH值对吸附容量有较大影响.在pH=8、吸附时间30 min、Cd2+溶液初始浓度0.02 mol/L和吸附剂用量0.10 g的条件下,吸附剂对Cd2+的饱和吸附量可达294.7 mg/g.与膨润土相比,三维网络凝胶吸附剂具有更高的吸附容量和更快的吸附速率.     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。     

Advanced treatment of wet-spun acrylic fiber manufacturing wastewater using three-dimensional electrochemical oxidation

A three-dimensional electrochemical oxidation(3D-EC) reactor with introduction of activated carbon(AC) as particle micro-electrodes was applied for the advanced treatment of secondary wastewater effluent of a wet-spun acrylic fiber manufacturing plant. Under the optimized conditions(current density of 500 A/m~2, circulation rate of 5 mL/min, AC dosage of 50 g, and chloride concentration of 1.0 g/L), the average removal efficiencies of chemical oxygen demand(COD_(cr)), NH3–N, total organic carbon(TOC), and ultraviolet absorption at 254 nm(UV_(254)) of the 3D-EC reactor were 64.5%, 60.8%, 46.4%, and 64.8%, respectively; while the corresponding effluent concentrations of COD_(cr), NH_3–N, TOC, and UV_(254) were 76.6, 20.1, and42.5 mg/L, and 0.08 Abs/cm, respectively. The effluent concentration of COD_(cr) was less than 100 mg/L, which showed that the treated wastewater satisfied the demand of the integrated wastewater discharge standard(GB 8978-1996). The 3D-EC process remarkably improved the treatment efficiencies with synergistic effects for COD_(cr), NH_3–N, TOC, and UV_(254) during the stable stage of 44.5%, 38.8%, 27.2%, and 10.9%, respectively, as compared with the sum of the efficiencies of a two-dimensional electrochemical oxidation(2D-EC) reactor and an AC adsorption process, which was ascribed to the numerous micro-electrodes of AC in the 3D-EC reactor. Gas chromatography mass spectrometry(GC–MS) analysis revealed that electrochemical treatment did not generate more toxic organics, and it was proved that the increase in acute biotoxicity was caused primarily by the production of free chlorine.     

珠江三角洲4种淡水养殖鱼类重金属的残留及食用风险评价

为全面了解珠江三角洲淡水水产品中重金属污染现状,评估其生态风险与食用安全,于2014年8月至2015年8月采集罗非鱼、草鱼、乌鳢及鳜鱼主要养殖鱼类样品共计57份,采用原子荧光光谱仪(AFS),电感耦合等离子体质谱(ICP-MS)仪进行分析测定,并采用单因子污染指数(Pi)、重金属污染指数(MPI)、每周可耐受摄入量(PTWI)以及食入健康风险指标(Ri总)分别评估其污染程度、食用安全性与健康风险。结果表明,样品中Cr、Ni、Cu、Zn、As、Cd、Hg、Pb的含量范围分别为0.020~3.240,0.020~0.800,0.110~1.100,0.190~19.970,0.030~1.480,nd~0.606,0.003~0.118,0.040~0.803 mg·kg-1(湿重),Cr、As、Cd、Pb在水产品中超标率大小依次为As(7.0%),Pb(7.0%),Cd(5.3%),Cr(1.8%)。Pi结果表明,目前珠江三角洲养殖水域水产品中Cu与Zn残留处于正常范围内,Cr和Hg有少量样品为轻度污染,Pb、Cd与As存在重度污染样品,所占比例为2.86%、6.02%和5.74%。MPI结果显示不同水产品污染程度为乌鳢>鳜鱼>罗非鱼>草鱼,总体上各种水产品MPI依然处于较低的水平;食用安全性结果显示,目前成人每周摄入水产品是安全的,但乌鳢Cr,罗非鱼As含量较高分别达到PTWI的37.76%和19.51%,表明水产品中Cr、As残留可能存在一定的食用安全隐患。健康风险模型结果显示,所有样品均未超过国际辐射防护委员会(ICRP)的推荐的最大可接受水平(5×10-6a-1)。综合分析珠江三角洲淡水养殖主要水产品可知,其尚未出现明显的污染安全问题,但As与Cr等元素的潜在风险值得进一步关注。     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.     

生物电耦合对活性炭-超滤工艺处理地表微污染水的影响机理研究

利用生物电化学系统处理地表水时，弱电压不但会刺激电活性菌的呼吸作用，而且会引起氧化胁迫导致胞外聚合物（Extracellular Polymeric Substance，EPS）过量分泌.为确认在地表水处理中弱电压对膜污染和净水效率的影响，本研究设置了外加1.0 V直流电压（记为"BES系统"）和无外加电压（记为"CK系统"）的两组平行对照生物活性炭-超滤系统.经过50 d的运行，BES系统（36.1 kPa）相比CK系统（19.1 kPa）跨膜压差（Trans Membrane Pressure，TMP）增加更为显著，膜污染更严重.电路电流、电极电势和循环伏安（Cyclic Voltammetry，CV）曲线显示，随着装置运行，两系统生物膜逐渐稳定，并且产生具有氧化还原活性的EPS导致阳极电容增加.相比之下，BES系统产生了更多EPS，具有更高的阳极电容.水质指标显示，BES系统中比紫外吸光度（Specific Ultraviolet Absorbance，SUVA）、NH₄⁺-N和PO₄^3--P的去除增强但总有机碳（Total Organic Carbon，TOC）去除减弱；三维荧光光谱（Excitation-Emission-Matrix，EEM）和尺寸排阻色谱（Size Exclusion Chromatography，SEC）分析结果表明，BES系统膜池中产生了更多的生物聚合物，但腐殖质类有机物明显减少.活性炭表面EPS含量和腺嘌呤核苷三磷酸（Adenosine Triphosphate，ATP）含量的测试结果证实，弱电压刺激了生物膜的生长，同时增加了氧化还原活性EPS的含量.对膜表面累积多糖、蛋白质含量的测试分析进一步揭示了多糖类大分子生物聚合物在膜表面的累积是导致严重膜污染的直接原因.研究可为生物电化学系统在微污染水处理的研究和应用提供新的见解.     

内电解-Fenton 氧化-膜生物反应器处理腈纶废水

采用内电解-Fenton 氧化-序批式膜生物反应器组合工艺处理腈纶废水.结果表明,在进水Ph 值为3、内电解反应时间2h、H₂O₂ 浓度1500 mg/L、Fe²⁺浓度600mg/L、Fenton 反应时间2h 的条件下,内电解-Fenton 组合工艺对COD 的去除率为72%,进水COD 从1328mg/L下降到369mg/L,废水BOD₅/COD 从0.14 上升到0.33,CN-从8.6mg/L 下降到0.215mg/L,提高了废水可生化性,为后续的生物处理创造了良好的条件.出水采用序批式膜生物反应器处理,在停留时间20h、缺氧搅拌90min、好氧120min 条件下,COD 去除率为80%,NH₄₊-N 去除率95%,BOD₅ 去除率92.6%,CN-去除率90.7%.最终出水COD、BOD5、NH4+-N、CN-、SS 分别为61,9.3,2.55,0.02,13mg/L