高铁酸钾预处理对活性污泥脱水性能的影响

通过投入不同剂量的高铁酸钾于剩余活性污泥中,研究其对污泥絮体性质和脱水性能的影响作用。污泥絮体性质的研究包括絮体粒径的变化以及污泥EPS含量的变化。脱水性能的研究包括过滤脱水性能(以CST表征)以及脱水程度(离心泥饼含固率)。实验结果表明,高铁酸钾的强氧化性可以破坏污泥絮体结构,提高污泥的机械脱水程度;但同时污泥EPS含量增加,对污泥过滤脱水性能有负面影响。高铁酸钾氧化分解生成的Fe(OH)3具有絮凝能力,可以使污泥颗粒重新絮凝;而其混凝作用可以破坏污泥细胞的稳定性,提高污泥的沉降性能。     

长江重点江段水体中多环芳烃及其衍生物的分布及健康风险

研究了长江攀枝花、宜宾、泸州、重庆、涪陵、三峡、岳阳、武汉、九江和南京共计10个重点江段枯水期和丰水期表层水中19种多环芳烃(PAHs)及其15种衍生物(SPAHs)的分布和来源,评估了长江PAHs类污染的健康风险及时空差异.结果表明,长江表层水中∑PAHs、∑SPAHs平均浓度分别为(147.3±59.8)、(73.2±29.7) ng·L^-1,检出率分别为82.9%、69.5%,其中2~3环(S)PAHs所占比例为79%.在SPAHs中,∑NPAHs(硝基取代PAHs)、∑MPAHs(甲基取代PAHs)、∑OPAHs(氧化PAHs)的平均浓度分别为(27.0±4.5)、(24.7±15.5)、(17.1±11.9) ng·L^-1.根据分子比值法及主成分分析可知,长江重点江段PAHs主要来源于生物质、化石及液体燃料燃烧,SPAHs主要来源于燃烧源和光化学转化,SPAHs及PAHs通过大气沉降汇入水体.采用毒性当量因子浓度计算对长江重点江段PAHs进行健康风险评估,结果表明在枯水期具有致癌性PAHs的∑TEQ_BaP值(苯并芘毒性当量)较高,其中岳阳、武汉江段的BaP毒性当量浓度高于我国地表水规定阈值,应当高度重视长江流域PAHs在枯水期引起的健康风险.     

焦炭和废铁屑微电解预处理垃圾渗滤液的研究

研究表明,废铁屑和焦炭微电解是预处理垃圾渗滤液的一种有效方法,可去除垃圾渗滤液COD、色度和腐殖酸等污染物质,改善其可生化性、降低负荷,为后续生化处理创造良好的条件.通过静态正交实验确定废铁屑和焦炭最佳投加体积比为1∶3;最佳反应pH值为4;动态实验中,反应时间为1 h时,COD和色度去除率分别高达68%和91%;BOD/COD从0.3提高到0.5左右.     

废水中GaAs、Ga3+、Ge4+对活性污泥脱氢酶的影响及其抑制动力学

以活性污泥脱氢酶的活性作为毒性指标,研究了半导体材料GaAs、Ga³⁺、Ge⁴⁺对活性污泥活性的抑制影响,并用Hg²⁺作为参比材料;同时对抑制动力学也作了初步研究。实验表明,GaAs、Ga³⁺、Ge⁴⁺及Hg²⁺的10％抑制浓度分别为45.00,371.63,0.13ppm/gMLSS,GaAs、Ga³⁺、Ge⁴⁺和Hg²     

电极配置和操作条件对静电油烟净化效率的影响

以有机气溶胶发生器产生的0.02～2.02μm癸二酸二辛酯颗粒模拟餐饮业排出的油烟PM2 5组分,利用静电低压撞击器颗粒物检测仪测定各粒径范围的颗粒个数和质量浓度,并系统研究了电极配置、电场风速和供电电压等因素对静电油烟净化效率的影响.结果表明:油烟荷电量以及荷电颗粒迁移距离是影响净化效率的关键因素,优化电极配置的增效...     

成都市工业挥发性有机物排源成分谱

选取成都市汽车制造和石油化工等典型工业行业,通过瓶采样和SUMMA罐采样及GC-MS分析方法,研究了不同生产工艺环节的挥发性有机物(VOCs)排放特征.结果表明,汽车制造各工艺环节均有各自的优势组分,其中喷漆排放以烷烃(32%)和芳香烃(35%)为主.家具制造排放特征与使用原辅料高度相关,以芳香烃(50%)和OVOCs(38%)为主.石油化工各装置区VOCs浓度范围为49～1 387μg·m~(-3),不同装置区存在较大差异,主要是由于炼油区主要产品为C_5～C_9的汽油和苯系物等,化工区则较多使用了溶剂同时生成烯烃类产品.电子制造均以OVOCs为主,占VOCs总排放的50%以上.制鞋行业排放VOCs主要由烷烃和OVOCs贡献,平均占比分别为52%和36%,与所用溶剂组分高度相关.汽车制造VOCs排放组分差异较大,主要以正十二烷和2-丁酮等为主.家具制造排放组分主要为苯乙烯、乙酸乙酯和间/对-二甲苯等,为涂料和稀释剂的典型组分.石油化工各装置区排放组分有差异,炼油区以苯乙烯等为主,化工区主要为1,3-丁二烯等,仓储区主要为C_3～C_5烷烃等,废水处理则主要为C_6～C_8烷烃等.电子制造主要组分均为乙醇和丙酮等醛酮组分.制鞋企业排放组分以C_5和C_6等烷烃为主.通过臭氧生成潜势计算比较,汽车制造和石油化工行业对臭氧生成潜势贡献较大的VOCs排放组分以烯烃和芳香烃为主,具有较高的污染源反应活性.研究表明各工业行业OVOCs排放比例(17%～96%)和对臭氧生成潜势贡献均较为显著,因此在进行VOCs排放控制时,除重点管控芳香烃和烯烃外,亦应提高对OVOCs组分的关注.     

Bioavailability of bound residue derived from 14C-labeled chlorsulfuron in soil and its mechanism of phytotoxicity

The bioavailability of bound residue(BR) derived from ^14C-labeled chlorsulfuron in soil and effect of the main components of the BR on growth of rape( brassica napus) and rice( Oryza sativa L. ) were investigated. The results showed that the BR with the concentration of 0.28 and 0.56 nmol/g air-dried soil, which was calculated by special radioactivity of ^14C-labeled chlorsulfuron parent compound, resulted in significant depression effect on growth of rape seedling. It was assured that the main components(2-amino-4-methoxyl-6-methyl-1,3,5-triazine, 2-amino-4-hydroxyl-6-methyl-1,3,5-triazine, and 2-chloro-benzenesul-fonamide) of the BR did not inhibit the growth of rape and rice. LC-MS analysis demonstrated that the parent compound previously bound to the soil matrix could be again released and transformed into methanol-extractable residue during the course of rape growth. It was concluded that the molecular leading to the phytotoxicity to rape and rice in the BR is still the parent compound.     

Fenton试剂和氨吹脱法处理苯唑醇废水的试验研究

采用Fenton试剂催化氧化和氨吹脱法对苯唑醇生产废水的处理进行了研究。实验结果表明 ,此方法对废水的CODCr和氨氮具有良好的去除效果 ,平均去除率分别达到 73 .5 %和 95 %以上。处理后废水的BOD5 CODCr>0 .45 ,其可生化性良好。该技术具有能耗低、操作简便等优点     

有毒有害气体低温等离子体催化处理反应器

等离子体催化技术是目前国内外公认的治理低浓度有害气体的有效方法之一。本文概述了填充床式反应器、点对板式反应器、平板式反应器和复合式反应器中利用低温等离子体结合催化剂处理有害废气的研究结果,并对反应器的结构、脱除效率及应用情况作了介绍。     

Changes in distribution and microstructure of bauxite residue aggregates following amendments addition

Bauxite residue is a highly alkaline byproduct which is routinely discarded at residue disposal areas. Improving soil formation process to revegetate the special degraded lands is a promising strategy for sustainable management of the refining industry. A laboratory incubation experiment was used to evaluate the effects of gypsum and vermicompost on stable aggregate formation of bauxite residue. Aggregate size distribution was quantified by fractal theory, whilst residue microstructure was determined by scanning electron microscopy and synchrotron-based X-ray micro-computed tomography. Amendments addition increased the content of macro-aggregates( 250 μm) and enhanced aggregate stability of bauxite residue. Following gypsum and vermicompost addition, fractal dimension decreased from 2.84 to 2.77, which indicated a more homogeneous distribution of aggregate particles. Images from scanning electron microscopy and three-dimensional microstructure demonstrated that amendments stimulate the formation of improved structure in residue aggregates. Pore parameters including porosity, pore throat surface area, path length, and path tortuosity increased under amendment additions. Changes in aggregate size distribution and microstructure of bauxite residue indicated that additions of gypsum and vermicompost were beneficial to physical condition of bauxite residue which may enhance the ease of vegetation.