Estimating emissions from crop residue open burning in China based on statistics and MODIS fire products

With the objective of reducing the large uncertainties in the estimations of emissions from crop residue open burning, an improved method for establishing emission inventories of crop residue open burning at a high spatial resolution of 0.25°× 0.25° and a temporal resolution of1 month was established based on the moderate resolution imaging spectroradiometer(MODIS) Thermal Anomalies/Fire Daily Level3 Global Product(MOD/MYD14A1). Agriculture mechanization ratios and regional crop-specific grain-to-straw ratios were introduced to improve the accuracy of related activity data. Locally observed emission factors were used to calculate the primary pollutant emissions. MODIS satellite data were modified by combining them with county-level agricultural statistical data, which reduced the influence of missing fire counts caused by their small size and cloud cover. The annual emissions of CO_2, CO, CH_4,nonmethane volatile organic compounds(NMVOCs), N_2O, NO_x, NH_3, SO_2, fine particles(PM2.5),organic carbon(OC), and black carbon(BC) were 150.40, 6.70, 0.51, 0.88, 0.01, 0.13, 0.07, 0.43,1.09, 0.34, and 0.06 Tg, respectively, in 2012. Crop residue open burning emissions displayed typical seasonal and spatial variation. The highest emission regions were the Yellow-Huai River and Yangtse-Huai River areas, and the monthly emissions were highest in June(37%).Uncertainties in the emission estimates, measured as 95% confidence intervals, range from a low of within ±126% for N_2O to a high of within ± 169% for NH_3.     

Two-step fast microwave-assisted pyrolysis of biomass for bio-oil production using microwave absorbent and HZSM-5 catalyst

A novel technology of two-step fast microwave-assisted pyrolysis(f MAP) of corn stover for bio-oil production was investigated in the presence of microwave absorbent(Si C) and HZSM-5catalyst. Effects of f MAP temperature and catalyst-to-biomass ratio on bio-oil yield and chemical components were examined. The results showed that this technology, employing microwave, microwave absorbent and HZSM-5 catalyst, was effective and promising for biomass fast pyrolysis. The f MAP temperature of 500°C was considered the optimum condition for maximum yield and best quality of bio-oil. Besides, the bio-oil yield decreased linearly and the chemical components in bio-oil were improved sequentially with the increase of catalyst-to-biomass ratio from 1:100 to 1:20. The elemental compositions of bio-char were also determined. Additionally, compared to one-step f MAP process, two-step f MAP could promote the bio-oil quality with a smaller catalyst-to-biomass ratio.     

徐州市尾水导流信息化监测平台的设计与应用研究

南水北调徐州市截污导流工程是保障江苏省南水北调出省水质达到Ⅲ类水标准的关键性工程.徐州市尾水导流信息化监测平台,基于地理信息系统,集数据采集与传输、实时监测、历史数据分析、视频监控、预警预报于一体,对工程现场的各种类型的监测数据和工况信息进行采集、分析和展示应用,是南水北调徐州市截污导流工程实现全面信息化管理的重要技术支撑,为东线水资源安全提供有力保障.     

Pd/CeZr/TiO2/Al2O3蜂窝状金属丝网催化剂选择催化还原NOX

采用溶胶-凝胶法和浸渍法制备了Pd/CeZr/TiO2Al2O3蜂窝状金属丝网催化剂,并将其应用于在富氧条件下以丙烯选择催化还原NOx的研究.利用扫描电镜(SEM)分析了钛酸四丁酯的含量以及涂敷次数对TiO2涂层的影响,系统地考察了Pd含量、氧气浓度和空速对蜂窝状金属丝网催化剂催化性能的影响.实验结果表明,采用钛酸四丁酯的含量为20.0%的溶胶,涂敷2次,可以在金属丝网载体上氧化铝涂层表面获得均匀、无皲裂的TiO2涂层;Pd含量在0.23%～1.06%的范围内, NOx的转化率随Pd含量的增加而减小, Pd含量为0.23%时, NOx表现最高的NOx转化率;反应气体中氧气浓度从1.5%增加到6.0%, NOx的转化率随氧气浓度的增加而增大,当氧气浓度高于6.0%, NOx的转化率则随氧气浓度的增加而迅速减小; NOx的转化率随着空速的增加而降低,在高温条件下空速对转化率的影响要大于在低温条件下.     

徐闻珊瑚礁保护区海水中多环芳烃的初探

2006年8月,对徐闻珊瑚礁自然保护区中多环芳烃的污染现状进行调查和研究,采用固相萃取,GC-MS检测,分析其中16种多环芳烃（PAHs）单体的含量,结果表明该海域海水中16种PAHs的总平均含量为87.06±90.62 ng·L^-1,变化范围为43.31～435.64 ng·L^-1,与世界其它一些近岸海区海水中的PAHs含量相比污染较为严重。A1站位的PAHs含量偏高,主要来源于陆地的工业废水和生活污水以及渔船油污。PAHs含量的增多对珊瑚礁生态系统具有一定影响,最终将影响到人类的自身健康。     

合成氨副产CO2气的回收与利用

CO2是《京都议定书》要求减排的6种温室气体之一,《京都议定书》还确立了有助于发展中国家获得资金和先进技术的清洁发展机制（CDM）。本文结合实际工程案例,介绍了合成氨副产CO2气的回收和利用方法,为我国氮肥行业申请CDM项目资助,回收利用CO2,减少CO2排放提供技术参考。     

安徽新桥铜硫矿床成矿时代及成矿物质来源

安徽新桥铜硫矿床的主要矿体呈似层状赋存于上石炭统黄龙组下部，矿石的Rb－Sr等时线年龄为313.2士32．7Ma，Ph－Ph等时线年龄为290±10Ma。锶和铅同位素组成反映成矿物质主要来自上地壳（地层）。矿床主要由海西期沉积成矿作用形成，后来受到了燕山期岩浆活动迭加改造。     

地表参数对面源大气预测结果的影响性分析研究

为了研究地表参数取值对AERMOD中面源模拟预测浓度值的影响,文章通过改变粗糙度、反照率和波文比的取值来进行不同地表参数与预测结果的相关性分析,同时采用正交试验法来研究不同地表参数对预测结果的敏感性.相关性分析表明,不同地表参数和预测结果有着很高的相关性.敏感性分析表明,反照率数值变化对小时最大落地浓度的敏感性最大,粗糙度数值变化对日均和年均最大落地浓度的敏感性最大.通过研究可以看出在面源大气预测过程中合理选择地表参数值是准确预测的前提.     

生态敏感性评价在生态文明建设中的运用研究——以四川省蓬安县为例

以四川省蓬安县为例,基于GIS空间分析技术,结合蓬安当地实际,选取水源涵养、土壤保持能力和生物多样性进行生态敏感性评价,获得蓬安县区域敏感性现状图,并以此为基础构建生态安全格局,该格局注重区域的内在机理与周围的相对联系,保证各生态环境功能区成为具有各自特点、功能和生命活力而又彼此联系的有机体,为其生态文明建设过程中重点领域和重点工程设计规划提供基础支撑,阐明了生态敏感性评价在生态文明建设中的运用,为县级生态文明建设规划做出了贡献.     

基于"3S"的南京市大气污染源清单网格化空间分配研究

基于GIS、RS、GPS集成技术,依据南京市10大类大气污染源排放和空间分布特征,采用合适的空间分配方法,根据各排放源的相关权重分配因子,构建了南京市2015年大气污染源排放清单1 km×1 km的网格化空间数据库,并基于GIS平台叠加显示形成了2015年南京市大气污染源1 km×1 km空间分布图.结果表明,此次空间分配结果与南京市GDP、路网、人口、农业等相关分布特征相互吻合,说明本研究网格化空间分配方法较为合理可靠,可满足后续空气质量模拟的需求.