安全生产风险预警探讨

以实现风险预警理论及技术在实际生产过程中的应用为目的,通过在油气初加工企业建立并实施安全生产风险预警的实践,讨论了安全生产风险预警机制的具体建立及实施过程,进一步探讨了风险辨识及评价的模式和方法及风险预警流程.     

TiO2-xNx光催化氧化苯甲酸的研究

采用悬浮态光催化反应体系,以氙灯为光源,自制纳米TiO2-xNx为催化剂,考察了苯甲酸光催化氧化过程中TiO2-xNx质量浓度、反应体系初始pH和苯甲酸初始质量浓度对苯甲酸溶液中TOC去除率的影响。实验结果表明：最佳催化剂质量浓度为0．30g／L;TiO2-xNx的等电点为pH=5．3,在酸性条件下（pH=2．0）更有利于苯甲酸在催化剂表面的吸附,以及光生电子与O2反应生成·OH的进行;随苯甲酸初始质量浓度增加,TOC去除率降低,反应速率也相应地降低。TiO2-xNx比P25型TiO2表现出更强的浓度适应能力。     

Participatory environmental governance in China: public hearings on urban water tariff setting

In the late 1990s China started to expand its market economic reform to the public sector, such as water services. This reform led to major changes in urban water management, including water tariff management. The reforms in water tariff management relate not only to tariffs, but also to the decision-making on tariffs. Water tariff decision-making seems to move away from China's conventional mode of highly centralized and bureaucratic policy- and decision-making. The legalization, institutionalization and performance of public hearings in water tariff management forms a crucial innovation in this respect. This article analyzes the emergence, development and current functioning of public hearings in water tariff setting, and assesses to what extent public hearings are part of a turning point in China's tradition of centralized bureaucratic decision-making, towards more transparent, decentralized and participative governance.     

装备故障模式影响实际分析

在明确FMEA分析方法意义的基础上,本文对某装备进行故障模式及影响分析,并得出相应结论,以有助于该装备的研制与使用。     

基层环境执法中环境行政强制问题的探讨

环境行政强制包括环境行政强制措施和环境行政强制执行.在基层环境执法实践中,环境行政强制措施尤其是环境行政强制执行存在许多困惑和问题,拓展环境行政强制措施,给予环保部门一定的行政强制执行权是提高基层环境执法效率和遏制环境污染的有效途径.     

Effect of manganese ion on the mineralization of 2,4-dichlorophenol by ozone

Mineralization of 2,4-dichlorophenol (DCP) was studied by ozone with Mn(2+) as an ozonation catalyst. Laboratory scale semi-batch ozonation experiments were conducted at room temperature. The results showed that trace amount of Mn(2+) accelerated the mineralization of DCP. Total organic carbon removal rate was independent on Mn(2+) dosage at its range of 0.1-0.5 mgL(-1). Dissolved ozone concentration in the solution remained low level in the catalytic ozonation process, which indicated that Mn(2+) catalyzed decomposition of ozone. DCP mineralization was inhibited in catalytic ozonation by the addition of carbonate. Electron spin resonance/spin-trapping technique was used to determine hydroxyl radicals, and the results showed that larger amounts of hydroxyl radicals were produced in catalytic ozonation system than those of single ozonation. Intermediates mainly including aliphatic carboxylic acids were determined qualitatively and semi-quantitatively by GC-MS. And, a general pathway for mineralization of DCP was proposed.     

Radiation-induced degradation of methyl orange in aqueous solutions

Degradation of methyl orange under gamma-irradiation was investigated. The reactions followed pseudo first-order kinetics. Apparent degradation rate constant, estimated through linear regression analysis, increased with an increase of dose rate and a decrease of initial methyl orange concentration. Degradation of methyl orange was significantly accelerated under oxidative condition, but was slightly enhanced under reductive condition. However, the result of decoloration was better under reductive condition than oxidative one. An analysis on the intermediates using Fourier transform infrared and gas chromatography/mass spectrometry demonstrates that the radiolytic degradation of methyl orange was processed with different C-N cleavages under oxidative and reductive conditions.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.