史前人类的航海

<正>欧洲人16世纪初次探索太平洋时,有一项惊人的发现:至少在2.6万年前,某些石器时代的人类不借助任何航海工具,登上了散布在这大片海域上的千百个大小岛屿。当地的传说中,有许多关于乘坐越洋独木舟航行千百公里抵达目     

采用Zn-Se/不锈钢阴极的超声-电解法处理罗丹明B废水

采用超声-电解法考察了Zn-Se/不锈钢阴极处理罗丹明B废水的效果及影响因素。正交实验优化结果表明:在电流密度为2.4A/dm2、废水初始pH为6、超声功率为160W、通气量为10L/h、m(Zn)∶m(Se)为1∶1.5的Zn-Se/不锈钢作阴极、Ti/TiO2和铁网为双阳极的条件下,超声-电解法处理罗丹明B废水120min,废水脱色率为98.97%,COD去除率为88.11%。     

TiO2/SiO2@γ-Fe2O3光催化剂的制备及其光催化性能

以共沉淀法制备的纳米Fe3O4为核,以正硅酸乙酯为硅源,通过溶胶-凝胶法制备了SiO2@Fe3O4壳-核结构纳米颗粒,再以钛酸四丁酯为钛源,通过溶胶-凝胶法、经焙烧制得TiO2/SiO2@γ-Fe2O3磁性纳米光催化剂。采用X射线衍射仪、透射电子显微镜、比表面分析仪、振动磁强计对光催化剂的结构进行了表征,以苯酚溶液为模拟废水对光催化剂的光催化性能进行了评价。实验结果表明:经500℃焙烧的光催化剂活性相为锐钛矿型TiO2;在苯酚溶液初始浓度为0.2mmol/L、苯酚溶液pH为7的条件下,COD去除率为70.9%。     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。     

水合肼生产盐渣中氮化合物的去除

将水合肼生产盐渣分离碳酸钠后,通过吹脱、氧化等工艺降低饱和盐溶液的氮含量(以氨质量浓度计),以达到电解法制备氢氧化钠工艺对原料氯化钠的使用要求。中试试验结果表明:氧化反应最佳工艺条件为以次氯酸钠为氧化剂,次氯酸钠溶液中氢氧化钠质量浓度9.2g/L,次氯酸钠与初始氨的质量比为13,溶液pH 7～8,反应温度30～35℃;在此条件下氧化处理饱和盐溶液,处理后氨质量浓度由350.0 mg/L降至2.1 mg/L。将处理后的饱和盐溶液用于电解法制备氢氧化钠的生产过程,不仅可创造一定的经济效益,而且还解决了水合肼生产中的环境污染问题。     

固定化白腐真菌反应器与接触氧化反应器联用处理癸二酸生产废水

采用固定化白腐真菌(WRF)反应器与接触氧化反应器联用处理癸二酸废水。在WRF反应器中,以汽曝玉米秸秆为载体,并添加铜、铁促进白腐真菌生长和产酶作用,载体的使用寿命约为45 d。在进水苯酚平均质量浓度为69.36 mg/L、平均进水COD为1 648.81 mg/L的条件下,经WRF反应器处理后,苯酚平均质量浓度降至7.59 mg/L,平均出水COD降至478.03 mg/L;再经接触氧化反应器处理后,苯酚平均质量浓度降至1.65 mg/L,平均出水COD降至297.31 mg/L。     

化工园区空气中非甲烷总烃与挥发性有机物的定量关系

采用美国环保署(EPA)推荐的TO14/15方法和自动监测测定了某化工园区空气中挥发性有机物(VOC)以及非甲烷总烃,测定结果显示化工园区空气中非甲烷总烃与VOC的定量关系可以通过有效碳质量浓度建立,即非甲烷总烃有效碳质量浓度和VOC有效碳质量浓度之和相等。并藉此定义总有效碳解析度(R)以表征空气自动监测选定项目对空气有机污染的覆盖率指标,计算结果表明该空气自动监测选定的11项指标平均可表征该区域空气有机污染的71%。     

Enhanced NOx removal from flue gas by an integrated process of chemical absorption coupled with two-stage biological reduction using immobilized microorganisms

An integrated process of metal chelate absorption coupled with two stage bio-reduction using immobilized cultures has been proposed to continuously removal of NO_x, and the effects of SO₂, NO and O₂ concentration, gas/liquid flow rate on NO_x removal efficiency were investigated. Although nitrogen-containing components, such as Fe(II)EDTA-NO, NO₂^? and NO₃^? in the scrubbing solution, inhibited the bio-reduction of Fe(III)EDTA obviously, it was feasible to abate the inhibition effect by using the two stage bio-reduction system, and thus to improve NO_x removal efficiency. The removal efficiency decreased slowly with the increase of SO₂, O₂, NO concentration and gas flow rate, and increased with the increase of liquid flow rate. Continuously operating for 18 days, a high removal efficiency around 95% was reached by using the two-stage bio-reduction system with immobilized microorganisms, while the value decreased to 85% after 5 days of operation by using the suspended microorganisms, at a constant gas flow rate of 60 L/h containing 424–450 mg/m³ NO, 2428–2532 mg/m³ SO₂ and 3% O₂.     

Emergy analysis of cassava vinasse treatment

Vinasse has great pollution to the environment. A number of technologies have been explored for reducing the pollution of vinasse. Sustainability has become an important factor when discussing wastewater treatment techniques. Emergy analysis was used to evaluate the treatment of cassava vinasse in this paper. Cr (emergy consumption ratio) as a new emergy index was proposed to measure the impact of waste treatment to the society. Centrifugal solid–liquid separation, UASB (up-flow anaerobic sludge bed), and SBR (sequencing batch reactor activated sludge process) are used in the treatment process. The emergy indices for cassava vinasse treatment system were as follows: EYR (emergy yield ratio) was 6.20, ELR (environmental loading ratio) was 5.81, ESI (emergy sustainability index) was 1.07, and Cr was 4.60E+12 sej/m³. The emergy of coal electricity accounts for 46% of all purchased inputs. It is necessary to improve the treatment technology to reduce the electricity used.