典型河谷城市儿童土壤与灰尘铅暴露风险

为定量评价河谷型城市土壤与灰尘铅对城市儿童健康的影响与风险,结合野外调查的基础上,以陕西渭河谷地典型工业城市宝鸡、西安、渭南和铜川为研究区域,以定量分析河谷型城市儿童环境铅暴露为核心,收集4个城市土壤与灰尘分析样品总计243个。利用X射线荧光光谱法测定了4个城市土壤与灰尘铅的含量;采用BCR连续形态分级法探究了城市土壤与灰尘重金属铅地球化学形态分布与迁移特征;根据US EPA污染物暴露与健康风险评价模型对城市儿童铅暴露进行了评价。研究结果表明渭河谷地典型城市宝鸡、铜川、西安和渭南城市土壤与灰尘铅浓度(X±SD)分别为(409.2±52.54)和(624.70±66.15)mg·kg-1、(357.47±41.37)和(592.60±36.78)mg·kg-1、(61.4±13.31)和(78.42±14.89)mg·kg-1、(46.71±12.11)和(64.7±13.76)mg·kg-1,均高出陕西省土壤铅背景值;污染水平依次为宝鸡铜川西安渭南。4个河谷型城市土壤与灰尘重金属铅发生整体迁移的趋势为:宝鸡城市灰尘(90.71%)西安城市灰尘(84.74%)≥宝鸡城市土壤(83.12%)渭南城市灰尘(74.89%)≥西安城市土壤(74.50%)铜川城市灰尘(72.49%)铜川城市土壤(57.50%)渭南城市土壤(53.79%)。可见,铅在均在城市灰尘中的迁移趋势远大于相应的城市土壤。4个城市土壤与灰尘均表现出较大的儿童暴露致癌风险,宝鸡和铜川城市儿童土壤与灰尘铅暴露也分别存在非致癌风险,风险程度依次为宝鸡铜川西安渭南。儿童铅暴露致癌与非致癌风险程度与其城市土壤和灰尘中铅可氧化态分布呈相似的规律,表明碱性的城市土壤与城市灰尘(p H7)中可氧化态铅可能是导致河谷型城市儿童铅暴露风险和儿童血铅污染的主要形态和因素。由此,城市燃煤排放与含铅制品的加工等活动可能是渭河谷地河谷型城市儿童血铅与铅暴露最主要的贡献源,必须采取长期有效的监测与控制措施。     

利用N-乙酰-β-D-氨基葡萄糖苷酶含量评价农药对花翅摇蚊种群发育的影响

为了进一步探索种群水平的生态风险评估方法,本文利用β-N-Acetyl-D-glucosaminidase(NAGase)的变化量来监测农药对摇蚊种群发育的影响。从花翅摇蚊Chironomus kiiensis体内分离纯化得到电泳纯的NAGase,并通过免疫大白兔制得NAGase的多克隆抗体。运用间接非竞争ELISA法检测抗体特异性,结果表明其与共同存在于水体的一些生物的NAGase的交叉反应率为隆线溞4.41%、老年低额溞3.12%、多刺裸腹溞3.40%、中华薄壳介4.17%、日本沼虾3.23%、白纹伊蚊7.50%、小球藻0.5%。运用抗体测得毒死蜱、氰戊菊酯和阿维菌素3种杀虫剂对于摇蚊NAGase释放量的12 d-EC50分别为1.2012、0.0043和0.6281μg·L-1,以NAGase活力作为测试终点,测得相应的12 d-EC50:1.4765、0.0051和0.6756μg·L-1,两者差异不显著,但均显著低于以死亡作为测试终点的12 d-LC50:4.8171、0.0954和2.1340μg·L-1,且毒力大小均为氰戊菊酯阿维菌素毒死蜱。上述结果表明,利用NAGase多克隆抗体可以特异性地检测农药对花翅摇蚊种群发育的影响。     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

Water Hyacinth in China: A Sustainability Science-Based Management Framework

The invasion of water hyacinth (Eichhornia crassipes) has resulted in enormous ecological and economic consequences worldwide. Although the spread of this weed in Africa, Australia, and North America has been well documented, its invasion in China is yet to be fully documented. Here we report that since its introduction about seven decades ago, water hyacinth has infested many water bodies across almost half of China’s territory, causing a decline of native biodiversity, alteration of ecosystem services, deterioration of aquatic environments, and spread of diseases affecting human health. Water hyacinth infestations have also led to enormous economic losses in China by impeding water flows, paralyzing navigation, and damaging irrigation and hydroelectricity facilities. To effectively control the rampage of water hyacinth in China, we propose a sustainability science-based management framework that explicitly incorporates principles from landscape ecology and Integrated Pest Management. This framework emphasizes multiple-scale long-term monitoring and research, integration among different control techniques, combination of control with utilization, and landscape-level adaptive management. Sustainability science represents a new, transdisciplinary paradigm that integrates scientific research, technological innovation, and socioeconomic development of particular regions. Our proposed management framework is aimed to broaden the currently dominant biological control-centered view in China and to illustrate how sustainability science can be used to guide the research and management of water hyacinth.     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.     

Short-term inhalation exposure evaluations of airborne antibiotic resistance genes in environments

Antibiotic resistance is a sword of Damocles that hangs over humans. In regards to airborne antibiotic resistance genes (AARGs), critical knowledge gaps still exist in the identification of hotspots and quantification of exposure levels in different environments. Here, we have studied the profiles of AARGs, mobile genetic elements (MGEs) and bacterial communities in various atmospheric environments by high throughput qPCR and 16S rRNA gene sequencing. We propose a new AARGs exposure dose calculation that uses short-term inhalation (STI). Swine farms and hospitals were high-risk areas where AARGs standardised abundance was more abundant than suburbs and urban areas. Additionally, resistance gene abundance in swine farm worker sputum was higher than that in healthy individuals in other environments. The correlation between AARGs with MGEs and bacteria was strong in suburbs but weak in livestock farms and hospitals. STI exposure analysis revealed that occupational intake of AARGs (via PM₁₀) in swine farms and hospitals were 110 and 29 times higher than in suburbs, were 1.5 × 10⁴, 5.6 × 10⁴ and 5.1 × 10² copies, i.e., 61.9%, 75.1% and 10.7% of the overall daily inhalation intake, respectively. Our study comprehensively compares environmental differences in AARGs to identify high-risk areas, and forwardly proposes the STI exposure dose of AARGs to guide risk assessment.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

Novel eco-friendly spherical porous adsorbent fabricated from Pickering middle internal phase emulsions for removal of Pb(II) and Cd (II)

Spherical porous materials prepared from the emulsion template used in the water treat-ment have displayed a vast prospect,as the high surface area,abundant porous structure,convenient operation and excellent adsorption performance.But the tedious fabrication process,high consumption of organic solvent and surfactant limited the application widely.Herein,a facile and eco-friendly spherical porous adsorbent (SPA) is fabricated from the green surfactant-free (corn oil)-in-water Pickering medium internal phase emulsions (Pick-ering MIPEs) via the convenient ion crosslinking procedure.The Pickering MIPEs synergis-tically stabilized with the semi-coke (SC),which is the natural particle produced from the shale oil distillation,and sodium alginate (SA) has excellent storage and anti-coalescence stability.The as-prepared porous adsorbent possessed the abundant pore structure,which provided favorable conditions for effective mass transfer in adsorption,and could be tuned by varying the SA dosage.The saturation adsorption capacities of Pb(Ⅱ) and Cd(Ⅱ) can be achieved with 460.54 and 278.77 mg/g within 45 min at 25℃,respectively.Overall,this study supplied a viable and eco-friendly route for fabricating the spherical porous adsorbent with a tunable porous structure for heavy metal ion wastewater.