Investigation on road traffic safety of the mountain areas in southwest China based on Wulong County, Chongqing Municipality

OBJECTIVE: To study the present situation, characteristics, and main problems of the traffic safety in the mountain areas of Southwest China. METHODS: A study was done on the traffic status of Wulong County, Chongqing Municipality, by means of document review, field investigation, and inquiry. RESULTS: The traffic crashes and deaths in Wulong County were increasing since 1999. From 1997 to 2001, there occurred 126 severe and very severe traffic crashes resulting in 175 deaths and 411 serious injuries, which accounted for 9.4% of total crashes, 96.1% of total deaths, and 48.4% of total serious injuries, respectively. The severe and very severe traffic crashes were highest in 2000. One part for 83 km in length accounting for 3.0% of No. 319 National Highway was responsible for 54.5% of very severe traffic crashes, which closely related to conditions of the road itself and its environment and defective execution of traffic laws. CONCLUSIONS: Wulong County, one of the mountain counties in Southwest China, is now facing a complex and serious road traffic situation and serious traffic safety, with a high incidence of severe and very severe road traffic crashes. The crashes closely relate to imperfect road design, defective execution of traffic laws, imperfect management, and environmental factors.     

Adsorption of arsenate on soils. Part 2: modeling the relationship between adsorption capacity and soil physiochemical properties using 16 Chinese soils

An attempt has been made to elucidate the effects of soil properties on arsenate adsorption by modeling the relationships between adsorption capacity and the properties of 16 Chinese soils. The model produced was validated against three Australian and three American soils. The results showed that nearly 93.8% of the variability in arsenate adsorption on the low-energy surface could be described by citrate-dithionite extractable Fe (Fe(CD)), clay content, organic matter content (OM) and dissolved organic carbon (DOC); nearly 87.6% of the variability in arsenate adsorption on the high-energy surface could be described by Fe(CD), DOC and total arsenic in soils. Fe(CD) exhibited the most important positive influence on arsenate adsorption. Oxalate extractable Al (Al(OX)), citrate-dithionite extractable Al (Al(CD)), extractable P and soil pH appeared relatively unimportant for adsorption of arsenate by soils.     

石油化工企业有限空间中的气体检测

介绍了便携式气体检测报警仪用于石油化工企业中有限空间的气体检测时的采样方法、检测点选择、检测工作程序以及检测结果的处理.     

Effects of arbuscular mycorrhizal inoculation on uranium and arsenic accumulation by Chinese brake fern (Pteris vittata L.) from a uranium mining-impacted soil

A glasshouse experiment was conducted to investigate U and As accumulation by Chinese brake fern, Pteris vittata L., in association with different arbuscular mycorrhizal fungi (AMF) from a U and As contaminated soil. The soil used contains 111 mg U kg(-1) and 106 mg As kg(-1). P. vittata L. was inoculated with each of three AMF, Glomus mosseae, Glomus caledonium and Glomus intraradices. Two harvests were made during plant growth (two and three months after transplanting). Mycorrhizal colonization depressed plant growth particularly at the early stages. TF (transfer factor) values for As from soil to fronds were higher than 1.0, while those for roots were much lower. Despite the growth depressions, AM colonization had no effect on tissue As concentrations. Conversely, TF values for U were much higher for roots than for fronds, indicating that only very small fraction of U was translocated to fronds (less than 2%), regardless of mycorrhizal colonization. Mycorrhizal colonization significantly increased root U concentrations at both harvests. Root colonization with G. mosseae or G. intraradices led to an increase in TF values for U from 7 (non-inoculation control) to 14 at the first harvest. The highest U concentration of 1574 mg kg(-1) was recorded in roots colonized by G. mosseae at the second harvest. The results suggested that P. vittata in combination with appropriate AMF would play very important roles in bioremediation of contaminated environments characterized by a multi-pollution.     

Reductive dechlorination of 1,2,4-trichlorobenzene with palladized nanoscale Fe(zero-valent) particles supported on chitosan and silica

In this study, nanoscale Pd-Fe particles, with diameters less than 100 nm, were synthesized and dispersed over the chitosan and silica supports. Three different Pd-Fe particles were synthesized, namely 0.1% Pd-Fe, 0.5% Pd-Fe and 1.0% Pd-Fe. SEM images confirmed that the Pd-Fe particles were dispersed over the surface of the supports while SEM-EDX confirmed evenly distribution of Pd over Fe(zero-valent). alpha-Fe(zero-valent) crystallites were identified by means of XRD and observed in TEM. Reductive dechlorinations of 1,2,4-trichlorobenzene (1,2,4-TCB) with the nanoscale Pd-Fe/chitosan and Pd-Fe/silica were carried out in the batch experiment system. Disappearance of the parent species and formation of the reaction intermediates and end product were monitored at discrete times. The results show that the nano-scale Pd-Fe particles were able to completely dechlorinate the chlorinated benzenes within a very short timescale. Complete dechlorinations of 1,2,4-TCB to benzene were achieved within 60 min with the 1.0% Pd-Fe/chitosan and within 100 min with the 1.0% Pd-Fe/silica. Reaction rates were observed to increase with increasing Pd content of the Pd-Fe/support. The reactions apparently followed pseudo-first-order kinetics with respect to the 1,2,4-TCB transformation. A kinetic model is constructed to fit the experimental results for the reactions, enabling identification of the major and minor dechlorination pathways of 1,2,4-TCB. The model suggests that the 1,2,4-TCB transformation mainly followed the primary pathway of direct reductive dechlorination to benzene and secondary pathway of sequential hydrogenolysis to 1,2-dichlorobenzene (1,2-DCB) and then chlorobenzene (CB) or benzene.     

混合质量阻尼器(HMD)抗震控制研究

建筑物的倒塌是地震造成破坏的主要形式之一 ,它导致大量的人员和财产损失。不断改进建筑物的抗震设计方法是传统的抗震减灾措施。随着结构振动控制领域的不断发展 ,它为建筑抗震减灾提供了一个新的途径。根据建筑结构抗震设计“三水准”的设防准则 ,混合质量阻尼器 (HybridMassDamper ,HMD)被应用于建筑抗震减灾中 ,对于发生频度较高的低烈度地震 ,主要通过调谐质量阻尼器 (TunedMassDamper ,TMD)控制结构的振动 ;而当发生烈度较高的地震或TMD不能满足控制目标要求时 ,启动作动器施加主动控制力 ,用主动控制力驱动TMD的附加质量块 ,提供给主结构更大的控制力 ,把TMD转化为主动质量阻尼器 (ActiveMassDemper ,AMD) ,取得预期的控制效果。理论分析和仿真计算表明 ,HMD适用地震激励的范围广 ,控制效果显著     

SO2对Ag/Al2O3催化剂上CH3OH还原NO性能的影响

用溶胶-凝胶混合法制备了Ag负载量为5%的Ag/A1₂O₃催化剂.研究了富氧条件下,SO₂对CH₃OH在催化剂上还原NO性能的影响.结果表明,反应气不含SO₂和H₂O时,NO还原活性温度较低,有显著量N₂O生成,这被归因为反应过程中,部分氧化态Ag被还原为金属Ag.添加SO₂或同时添加SO₂和H_{2相似文献}   

镉对单环刺螠非特异性免疫及组织蓄积的影响

为探究镉(Cd)对海洋动物的毒性效应,考察了不同质量浓度(0.005、0.05和0.5 mg·L~(-1)) Cd处理对单环刺螠相关免疫生理指标及主要组织中Cd蓄积量的影响。结果表明:Cd胁迫下,血细胞密度(density of hemocyte, DHC)先升后降再升,酚氧化酶(phenoloxidase, PO)活力先升后降,溶菌酶(lysozyme, LSZ)活力先降后升再降,至处理96 h,处理组DHC均显著高于对照组(P0.05),总蛋白含量变化不显著;除低浓度胁迫组(0.005 mg·L~(-1))PO活力与对照组相近外,其他处理组的PO和LSZ活力均显著低于对照组(P0.05)。超氧化物歧化酶(superoxide dismutase, SOD)活力和丙二醛(malondialdehyde, MDA)含量总体呈上升趋势,过氧化氢(H_2O_2)含量先升后降再升,至胁迫96 h,各处理组SOD活力、MDA和H_2O_2含量均显著高于对照组(P0.05)。总之,Cd胁迫对单环刺螠非特异性免疫影响显著,Cd的短期胁迫可刺激DHC、PO和LSZ升高,免疫力增强,而高浓度Cd的胁迫时间较长会造成机体解毒能力下降,持续刺激机体产生过氧化反应,MDA含量升高,可作为单环刺螠在Cd长期胁迫下的免疫检测指标。不同胁迫浓度组单环刺螠肌肉和消化道中的Cd含量随胁迫时间均呈上升趋势,且存在显著的时间-剂量-效应关系(P0.05),其蓄积量水平为:消化道肌肉,具有组织特异性。     

Influence of low molecular weight anionic ligands on the sorption of heavy metals by soil constituents: a review

Environmental Chemistry Letters - The sorption of heavy metals by soil constituents reduces the absorption of these pollutants by crops and vegetables, and thus limit food contamination. Low...     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.