常见烯烃爆炸特性的研究

为减少烯烃类爆炸事故带来的严重危害,采用国际通用的20L球型爆炸测试装置测试了常温初始压力为0.1 MPa条件下,4种常见烯烃的爆炸特性参数.结果表明,随着烯烃含量的增加各项爆炸特性参数均呈现出先增大后减小的特征,最大爆炸压力和爆炸指数均在化学计量比附近获得,4种烯烃最大爆炸压力分别为乙烯1.5 MPa、丙烯1.3 MPa、正丁烯1.5 MPa、异丁烯1.6 MPa,爆炸指数分别为16.56 (MPa·m)/s、7.37(MPa·m)/s、16.98 (MPa·m)/s、29.07(MPa· m)/s.     

A Bayesian approach to construct bow tie diagrams for risk evaluation

Bow tie diagrams have become a popular method for risk analysis and safety management. This tool describes the whole scenario of a given risk graphically, and proposes preventive and protective barriers to reduce, respectively, its occurrence and its severity. The weakness of bow tie diagrams is that they are restricted to a graphical representation of different scenarios exclusively designed by experts that ignore the dynamic aspect of real systems. Thus, constructing bow tie diagrams in an automatic and dynamic way remains a real challenge. This paper proposes a new Bayesian approach to construct bow tie diagrams from real data and improve them by adding a new numerical that enables us to implement the appropriate preventive and protective barriers in a dynamic manner.     

MPP协同MF@ADP阻燃低密度聚乙烯性能研究*

为提高低密度聚乙烯（LDPE）阻燃性能和阻燃LDPE复合材料的力学性能与抑烟性能,采用原位聚合法制备三聚氰胺-甲醛（MF）树脂包覆二乙基次磷酸铝（ADP）的MF@ADP微胶囊,再引入三聚氰胺聚磷酸（MPP）与MF@ADP进行协效复配,熔融共混制备阻燃LDPE复合材料。通过氧指数、热重分析、力学测试和烟密度测试等研究复合材料的阻燃、力学和抑烟性能。研究结果表明:MF@ADP微胶囊能改善阻燃剂与复合材料之间的相容性,与MPP复配构成的磷-氮膨胀阻燃体系能有效提高LDPE的抑烟性能;当MF@ADP∶MPP的质量比为2∶1时,材料的LOI达到了30.6%,垂直燃烧测试达到UL-94 V0级,拉伸强度为11.8 MPa,且形成的P/N/O高聚物炭层稳定性更高,可减少LDPE燃烧释放的烟雾量。     

A fast and accurate method for specific detection and quantification of the bloom-forming microalgae Karlodinium veneficum in the marine environment

Environmental Science and Pollution Research - Karlodinium veneficum is a toxic benthic globally distributed dinoflagellate which has direct impacts on human health and the environment. Early and...     

Bioavailability and tissue distribution of Dechloranes in wild frogs (Rana limnocharis) from an e-waste recycling area in Southeast China

Dechlorane Plus(DP), a flame retardant used as an alternative to decabromodiphenylether, has been frequently detected in organisms, indicating its bioaccumulation and biomagnification potential in aquatic and terrestrial species. However, little data is available on the bioaccumulation of DP in amphibians. Dechlorane Plus and its analogs(DPs) were detected in the liver, muscle and brain tissues of wild frogs(Rana limnocharis), which were collected from an e-waste recycling site, Southeast China. DP, Mirex, Dec 602 and a dechlorinated compound of DP(anti-Cl11-DP) varied in the range of 2.01–291, 0.650–179, 0.260–12.4, and not detected(nd)–8.67 ng/g lipid weight, respectively. No difference of tissue distribution was found for syn-DP, Mirex and Dec 602 between the liver and muscle tissue(liver/muscle concentration ratio close to 1, p 0.05). However, higher retention was observed for anti-DP and anti-Cl11-DP in the frog muscle relative to the liver tissue(liver/muscle concentration ratio 1, p 0.05). Additionally, the blood-brain barrier was found to work efficiently to suppress these compounds entering brain tissues in this species(liver/brain concentration ratio 1, p 0.05), and the molecular weight was a key factor impacting the extent of the blood-brain barrier. Compared to levels in the muscle and brain tissue, a preferential enrichment of syn-DP was observed in the liver tissue, suggesting the occurrence of stereo-selective bioaccumulation in the wild frog.     

Rapid detection of multiple class pharmaceuticals in both municipal wastewater and sludge with ultra high performance liquid chromatography tandem mass spectrometry

This work described the development, optimization and validation of an analytical method for rapid detection of multiple-class pharmaceuticals in both municipal wastewater and sludge samples based on ultrasonic solvent extraction, solid-phase extraction, and ultra high performance liquid chromatography-tandem mass spectrometry quantification. The results indicated that the developed method could effectively extract all the target pharmaceuticals （25） in a single process and analyze them within 24 min. The recoveries of the target pharmaceuticals were in the range of 69%-131% for wastewater and 54%-130% for sludge at different spiked concentration levels. The method quantification limits in wastewater and sludge ranged from 0.02 to 0.73 ng/L and from 0.02 to 1.00μg/kg, respectively. Subsequently, this method was validated and applied for residual pharma- ceutical analysis in a wastewater treatment plant located in Beijing, China. All the target pharmaceuticals were detected in the influent samples with concentrations varying from 0.09 ng/L （tiamulin） to 15.24 μg/L （caffeine）; meanwhile, up to 23 pharmaceuticals were detected in sludge samples with concentrations varying from 60 ng/kg （sulfamethizole） to 8.55 mg/kg （ofloxacin）. The developed method demonstrated its selectivity, sensitivity, and reliability for detecting multiple-class pharmaceuticals in complex matrices such as municipal wastewater and sludge.     

组合压气机中尾迹与势流同频/异频干涉的叠加特性

为揭示多级压气机中上下游叶轮对中间叶片叠加气动影响特性,阐述不同叠加干涉情况下下游叶轮进气角度变化,采用数值方法模拟了一级轴流和一级离心组成的组合压气机非定常流场。详细讨论了上游动叶尾迹和下游动叶势流对中间导流叶栅段气流非定常流动的异频和同频叠加干涉特性,依据计算结果,直观地展示了静叶通道中两种干涉间相互激励和抑制作用的位置和时间,与数学公式的推导结果相互印证。研究结果表明:当上下游动叶对中间静叶段异频干涉时,干涉的激励、抑制区域的轴向位置随时间发生变化;当上下游动叶对中间静叶干涉频率相同时,干涉的相互激励、抑制区域的轴向位置不随时间发生变化,但干涉的激励、抑制区域的轴向位置受时序位置影响。另外,上游动叶尾迹与下游离心叶轮势流的不同叠加情况,决定着下游离心叶轮进口相对气流角的大小及波动幅值。      

Adsorptive removal of antibiotics from water using magnetic ion exchange resin

The occurrence of antibiotics in the environment has recently raised serious concern regarding their potential threat to aquatic ecosystem and human health. In this study, the magnetic ion exchange(MIEX) resin was applied for removing three commonly-used antibiotics, sulfamethoxazole(SMX), tetracycline(TCN) and amoxicillin(AMX) from water.The results of batch experiments show that the maximum adsorption capacities on the MIEX resin for SMX, TCN and AMX were 789.32, 443.18 and 155.15 μg/m L at 25°C,respectively, which were 2–7 times that for the powdered activated carbon. The adsorption kinetics of antibiotics on the MIEX resin could be simulated by the pseudo-second-order model(R~2= 0.99), and the adsorption isotherm data were well described by the Langmuir model(R~2= 0.97). Solution p H exhibited a remarkable impact on the adsorption process and the absorbed concentrations of the tested antibiotics were obtained around the neutral p H.The MIEX resin could be easily regenerated by 2 mol/L Na Cl solution and maintained high adsorption removal for the tested antibiotics after regeneration. Anion exchange mechanism mainly controlled the adsorption of antibiotic and the formation of hydrogen binding between the antibiotic and resin can also result in the increase of adsorption capacity. The high adsorption capacity, fast adsorption rate and prominent reusability make the MIEX resin a potential adsorbent in the application for removing antibiotics from water.