超强静磁场对染料脱色菌Escheriehia coli的acpD基因的影响

将大肠杆菌E.coli ATCC8739置于12.0 T超强静磁场(ultra-strong static magnetic field,SMF)中进行处理,获得了磁场处理0.5、1、2、4和8 h的菌株E.coli-SMFn(n=0.5、1、2、4、8)。在37℃、pH 7、静置的条件下,菌株对偶氮染料AR14(I.C.Acid Red 14)的脱色结果指出,当反应进行到4、6和8 h时,E.coli-SMF8的脱色效率分别为18%、55%和96%,远高于E.coli ATCC8739的3%、19%和50%,表明SMF作用显著地增强了菌株的脱色效率。基因组DNA提取、PCR扩增、分子克隆以及基因测序的实验结果进一步表明,全部6例E.coli ATCC8739菌株的偶氮还原酶基因(acpD)序列均与GenBank中报道的完全一致;而E.coli-SMF8菌株的acpD-SMF8核酸序列中缺失了第99位的胞嘧啶。该缺失突变不仅使acpD-SMF8的核酸序列与acpD的存在显著不同,同时得到了具新活性中心的偶氮还原酶AzoR-SMF8。这个新的活性中心具有更强的黄素(FMN)结合能力,因此使该酶与偶氮染料的亲和力大大增加,促进了脱色效率的提高。     

烟气同时脱硫脱氮生物膜填料塔的适用外加碳源

实验分别考察了外加乙酸钠、葡萄糖、酒石酸钾钠、甲醇等4种低分子有机碳源对生物膜填料塔烟气同时脱硫脱氮效率的影响。结果表明,外加乙酸钠的脱氮效果最佳,对NOx的平均去除率为62.05%;外加葡萄糖、酒石酸钾钠、甲醇时的NOx平均去除率分别为51.03%、46.98%、58.71%。乙酸钠、酒石酸钾钠、甲醇均能使SO2的去除率达到100%,葡萄糖显著降低了SO2的去除率。乙酸钠是在生物膜填料塔烟气同时脱硫脱氮技术中适宜的外加碳源。     

抗压实验法厌氧颗粒污泥机械强度的测定及影响因素分析

通过首先对厌氧颗粒污泥样品进行筛分,然后测定其机械强度,解决了实际操作过程中现有抗压实验法出现的精确度与重现性较差的问题。通过对不同来源厌氧颗粒污泥样品机械强度的测定、对比分析发现,厌氧颗粒污泥的机械强度大小与反应器的规模、反应器所采用水力负荷存在一定的正相关性,且与其主要金属元素（Ca、Fe和Mg）含量的大小存在着密切的关系。     

生物膜填料塔净化模拟烟气和电厂烟气中SO2和NOx的对比实验

对生物膜填料塔对模拟烟气和电厂烟气的净化效果进行了实验研究。实验对比分析了在相同的实验条件下生物膜填料塔对不同烟气中SO2和NOx的净化效率。实验结果表明,在循环液温度在24～35℃、空床停留时间（EBRT）为60s、喷淋量为8～10L／h、脱硫塔的pH为0．8～1．5、脱氮塔的pH为7．5～8．0的条件下,生物膜填料塔对模拟烟气和电厂烟气中SO2的净化效率都很高,但模拟烟气条件下的总脱氮率的平均值为80％,而在电厂烟气条件下只有35％。经分析认为,脱氮率产生差异的主要原因是电厂烟气中杂质的影响,以及烟气中氧气含量的不同,同时因为生长条件不同从而驯化出的微生物群体组成也不同。     

Biodegradability of Epoxidized Soybean Oil Based Thermosets in Compost Soil Environment

In this study, bio-thermoset from epoxidized soybean oil (ESO) was prepared in the presence of methylhexahydrophthalic anhydride curing agent and 2-ethyl-4-methylimidazole catalyst. The crosslink densities of the synthesized ESO are ranged from 0.109 × 10^?3 to 0.308 × 10^?3 mol/cm³. The ESO bio-thermosets were exposed to the soil-burial test for 8 months. Weight change and morphology of the degraded ESO specimens were assessed. It was found that the weight loss of ESO was governed by the materials compositions, crosslink density and the soil-burial exposure time. The 3 mm thickness ESO bio-thermosets with crosslink density of 0.109 × 10^?3 mol/cm³ had fully biodegraded after soil-burial for 6 months. In addition, 16S rDNA sequencing was carried out to identify the soil microorganisms. It was suggested that Comamonas sp., Bacillus sp., Streptomyces sp. and Acinetobacter sp. are the possible soil microbes that degrade the ESO bio-thermosets in the compost soil environment.     

Comparative Thermodynamic Study on the Contribution of the Autocondensation and Copolymerization Reactions for the Tannins of the Subspecies of Acacia nilotica

Autocondensation and copolymerization reactions of the Acacia nilotica subspecies tomentosa (Ant) and the subspecies adansonii (Ana) tannins extracts solutions have been studied at several pH values by thermomechanical analyzer. Results of chemical analysis of these tannins revealed that the studied tannins, Ant and Ana contained high percentages of extractable tannins (54 and 57 %) for and polyphenolic materials (78 and 80 %) respectively. Different hardeners such as paraformaldehyde, Urea and pMDI were added at different ratios and their polycondensation reactions was studied and compared with their autocondensation ones. The aim was to evaluate the tannins suitability for the production of commercially and technically viable tannin adhesives with reduced Formaldehyde emission for wood products and to study the interference between the autocondensation and the copolymerization reaction. The obtained results of autocondensation reaction for both of the tannins studied showed that the best Young’s modulus values for Ant (3,500 and 2,750 MPa) and Ana (2,650 and 2,620 MPa) were obtained at pH 5 and 7. The Young’s modulus values obtained by the tannins Ant were higher than those achieved by Ana. This indicates that the Ant is more reactive than Ana. These results were also in line with results achieved by the gel time for both of the tannins. Gel time results indicate that the reactivity of both tannins increased towards alkalinity with Ana being more reactive at alkaline pH. Addition of 8 % of paraformaldehyde was adversely affecting the autocondensation reactions, as the best Young’s modulus values were achieved at pH 4 for Ant tannins. As for Ana the higher Young’s modulus values (2,000 and 2,310 MPa) were achieved at pH 5 and 7. This indicates that autocondensation reaction was contributed to the final network of the copolymerization reaction. When smaller ratio of paraformaldehyde and Urea (5 %) was added to Ant tannins it favors the autocondensation reaction and the best Young’s modulus values were obtained at pH 5 and 7. Addition of pMDI (10–30 %) was found to decrease the temperature of copolymerization and the obtained Young’s modulus values by Ant were lower than those obtained by autocodensation reaction. Best Young’ modulus values were obtained by Ant at pH 5 and 7. Ana gave the best Young’s modulus values at pH 4 and 5 indicating that the autocondensation appears to depress the copolymerization reactions. The obtained results by both reactions were very important from technical and economical point of view as they concluded that it is very possible to produce adhesives system with zero emission depending on the tannins autocondensation reaction and pH values. Reduction of formaldehyde emission was also possible upon addition of smaller amount of paraformaldehyde and Urea.     

Development of eco-friendly bioplastic like PHB by distillery effluent microorganisms

During screening for poly-β-hydroxybutyrate (PHB) producing bacteria from distillery effluent sample, six out of 30 isolates comprising of three strains of Alcaligenes sp., two strains of Bacillus sp., and one strain of Pseudomonas sp. were found to accumulate varying levels of intracellular PHB. Amongst the various isolates, Alcaligenes sp. RZS4 was found as the potent PHB-producing organism, accumulating higher amounts of PHB. PHB productivity was further enhanced in the presence of oxygen, nitrogen-limiting conditions, and cloning of PHB synthesizing genes of Alcaligenes sp. RZS 4 into Escherichia coli. A twofold increase in PHB yield was obtained from recombinant E. coli vis-à-vis Alcaligenes sp.; the recombinant E. coli accumulated more PHB in NDMM, produced good amount of PHB in a single-stage cultivation process under both nutrient-rich and nutrient-deficient conditions. Extraction of PHB with acetone–alcohol (1:1) was found as suitable method for optimum extraction of PHB as this mixture selectively extracted PHB without affecting the non-PHB cell mass. PHB extract from recombinant E. coli showed the presence of C–H, =O stretching, =C–H deformation, =C–H, =CH, and =C–O functional groups characteristic of PHB.     

Application of 15N–18O double stable isotope tracer technique in an agricultural nonpoint polluted river of the Yangtze Delta Region

One strategy to combat nitrate (NO₃-N) contamination in rivers is to understand its sources. NO₃-N sources in the East Tiaoxi River of the Yangtze Delta Region were investigated by applying a ¹⁵N–¹⁸O dual isotope approach. Water samples were collected from the main channel and from the tributaries. Results show that high total N and NO₃-N are present in both the main channel and the major tributaries, and NO₃-N was one of the most important N forms in water. Analysis of isotopic compositions (δ ¹⁸O, δD) of water suggests that the river water mainly originated from three tributaries during the sampling period. There was a wide range of δ ¹⁵N-NO₃ (?1.4 to 12.4 ‰) and a narrow range of δ ¹⁸O-NO₃ (3.7 to 9.0 ‰) in the main channel waters. The δ ¹⁵N and δ ¹⁸O-NO₃ values in the upper, middle, and lower channels along the river were shifted as 8.2, 3.5, and 9.5 ‰, and 9.0, 4.2, and 6.0 ‰, respectively. In the tributary South Tiao, the δ ¹⁵N and δ ¹⁸O-NO₃ values were as high as 9.5 and 7.0 ‰, while in the tributaries Mid Tiao and North Tiao, NO₃-N in most of the samples had relatively low δ ¹⁵N and δ ¹⁸O-NO₃ values from 2.3 to 7.5 ‰ and 4.7 to 7.0 ‰, separately. Our results also suggest that the dual isotope approach can help us develop the best management practice for relieving NO₃-N pollution in the rivers at the tributary scale.     

Spatial distribution of perfluoroalkyl acids in the Pearl River of Southern China

An intensive campaign was conducted in September 2012 to collect surface water samples along the tributaries of the Pearl River in southern China. Thirteen perfluoroalkyl acids (PFAAs), including perfluorocarboxylates (PFCAs, C4–C11) and perfluorosulfonates (PFSAs, C4, C6–C8, and C10), were determined using high-performance liquid chromatography/negative electrospray ionization–tandem mass spectrometry (HPLC/(-)ESI–MS/MS). The concentrations of total PFAAs (ΣPFAAs) ranged from 3.0 to 52 ng L⁻¹, with an average of 19 ± 12 ng L⁻¹. The highest concentrations of ΣPFAAs were detected in the surface water of the Dong Jiang tributary (17–52 ng L⁻¹), followed by the main stream (13–26 ng L⁻¹) and the Sha Wan stream (3.0–4.5 ng L⁻¹). Perfluorooctanoate (PFOA), perfluorobutane sulfonate (PFBS), and perfluorooctane sulfonate (PFOS) were the three most abundant PFAAs and on average accounted for 20%, 24%, and 19% of ΣPFAAs, respectively. PFBS was the most abundant PFAA in the Dong Jiang tributary, and PFOA was the highest PFAA in the samples from the main stream of the Pearl River. A correlation was found between PFBS and PFOA, which suggests that both of these PFAAs originate from common source(s) in the region. Nevertheless, the slope of PFBS/PFOA was different in the different tributaries sampled, which indicates a spatial difference in the source profiles of the PFAAs.     

碘掺杂Ti02可见光光催化性能研究

在低于100℃温度条件下,采用溶胶一凝胶法以钛酸正丁酯为钛源,碘酸钾为碘源,制备了I掺杂纳米TiO2催化剂（I-TiO2）,运用x-射线衍射（XRD）、透射电镜（TEM）及x-射线光电子能谱（XPS）等对催化剂进行表征,结果表明,TiO2及I-TiO2催化剂均为锐钛矿,I吸附并包裹在TiO2表面或以间隙进入的形式存在,并未进入TiO2晶格。通过在可见光照射下（A〉420nm）以罗丹明B（RhodamineB,RhB）的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能,结果表明,掺杂比为n1：n^ti=0．05：l,焙烧温度为400℃,降解介质条件pH=7时,l-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱（IR）,总有机碳（TOC）跟踪测定,比较了TiO2掺杂前后降解RhB和对氯苯酚（4-CP）的光催化特性差异;同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种,表明在可见光下,I-TiO2光催化体系中产生·OH高活性氧化物种从而氧化降解目标化合物。