Antimicrobial susceptibility of Escherichia coli isolated from shrimp (Litopenaeus vannamei) and pond environment in northeastern Brazil

This study aimed to test the susceptibility of Escherichia coli strains isolated from the water, bottom sediments and individuals cultivated in shrimp farm ponds, to antibiotics belonging to different families, namely B-Lactams: Imipenem (IPM; 10 μ g), Ampicillin (AMP; 10 μ g), Cephalothin (CEP; 30 μ g), Cefoxitin (FOX; 30 μ g), Ceftriaxone (CRO; 30 μ g); Tetracycline: Tetracycline (TCY; 30 μ g); Aminoglycosides: Gentamicin (GEN; 10 μ g), Amikacin (AMK; 30 μ g); Chloramphenicol: Chloramphenicol (CHO; 30 μ g); Fluoroquinolones: Ciprofloxacin (CIP; 5 μ g); Nitrofurans: Nitrofurantoin (NIT; 300 μ g); Sulfonamides: Trimethoprim-Sulfamethoxazole (SXT; 30 μ g); Quilononas: Nalidixic Acid (NAL; 30 μ g). In the laboratory, the method of dissemination (Test Kirby-Bauer) was performed in order to fulfill the antibiogram tests. The results showed high indices of resistance to Imipenem, Cephalothin and Ampicillin. Chloramphenicol, Nitrofurantoin, Cefoxitin, Ceftiaxone and Ciprofloxacin have displayed the highest index of sensitive strains. The antibiotic resistance index (ARI) and the multiple resistance index (MAR) varied within the ranges of 0.068–0.077 and 0.15–0.39, respectively. More than 90.5% of strains of Escherichia coli showed a variety of resistance profiles to the tested antibiotics. The high indices of resistance may be a consequence of indiscriminate use of antibiotics, but also the transfer of resistance through mobile genetic elements found in shrimp farms.     

The environmental pollution of Kandy Lake: A case study from Sri Lanka

The water pollution levels of Kandy Lake in Sri Lanka were monitored to probe the impacts and influences of urban environment in a developing country. Although Kandy Lake is a source of drinking water for the town, it was observed that a large number of effluent channels drained in to it, carrying a continuous flow of contaminated water. The hydrogeochemistry, pH, and bacterial levels were studied using lake and drain water samples. A high coliform count and a high degree of faecal contamination was observed in all water samples obtained from the lake and drains. The Cu²⁺ and F^? concentrations were relatively low and did not reach harmful levels, but were higher than that in the background. The pH of water remained almost neutral and provided ideal conditions for bacterial growth. All laboratory and field experiments indicated eutrophic conditions in the lake and the unsuitability of water in the unpurified state for drinking purposes. The purified water had a zero coliform count, but the chlorine content added was relatively high and may also prove to be a health hazard. On the whole, the polluted water in Kandy Lake indicated the adversities of human involvements with nature and provided a good case study for human influence on water pollution in a developing country.     

Comparison between solid-phase extraction methods for the chromatographic determination of organophosphorus pesticides in water

A solid-phase microextraction (SPME) procedure has been developed to extract eight organophosphorus pesticides (OPs) in water and the method was compared with a conventional solid phase extraction (SPE) technique. The extracted OPs were analyzed by gas chromatography using thermionic specific detection. Both extraction methods presented linear calibration at least over the concentration range investigated (100 to 1000 ng x mL(-1) for SPE and 1 to 100 ng x mL(-1) for SPME). SPME method presented higher sensitivity than SPE. The quantitation limits were between 0.1 to 1.0 ng x mL(-1) for SPME depending upon the analyte, and 100 ng x mL(-1) for SPE. The precision, as measured by the standard deviations (RSD), were in the range 3.6% to 5.8% for SPME and 2.4% to 9.2% for SPE. Along with the feature of being a solvent - free sampling technique, SPME offers additional benefits due to its high sensitivity, simplicity, and small size sample required (typically: SPE - 500 mL, SPME - 5 mL).     

Isotopic evidence for niche partitioning and the influence of anthropogenic disturbance on endemic and introduced rodents in central Madagascar

We applied a multi-isotope approach to examine aspects of niche partitioning, competition, and mobility for rodents in the Central Highlands of Madagascar. Specifically, we used carbon (δ¹³C), nitrogen (δ¹⁵N), and strontium (⁸⁷Sr/⁸⁶Sr) isotope ratios in bone to investigate diet and mobility for endemic tufted tail rats (Eliurus spp.), and introduced black rats (Rattus rattus) and house mice (Mus musculus) within and outside a fragment of montane humid forest in the Ambohitantely Special Reserve. There was a clear spatial segregation in trapping success for different species: Eliurus was only in the forest interior and edge, Mus only outside of the fragment in a marsh and park housing complex, and Rattus in all habitats except the housing complex. We find only moderate support for mobility of rodents among habitats. Mus may routinely move between the marsh and housing complex. However, regular movement between the forest edge and interior, or between the forest fragment and surrounding grassland is not supported. Taxa appear to target different foods: Rattus tends to feed at a higher trophic level than Eliurus, and Mus consumes some C₄ resources. To date, strontium isotopes have been underutilized in ecological research. Here, we show that they are highly complementary to carbon and nitrogen isotope data. Even in localities with relatively uniform underlying geology, it may be possible to distinguish individuals that regularly forage in different habitats.     

Comparison of the substrate effect on voc emissions from water based varnish and latex paint

BACKGROUND, AIMS AND SCOPE: The building materials are recognised to be major contributors to indoor air contamination by volatile organic compounds (VOCs). The improvement of the quality of the environment within buildings is a topic of increasing research and public interest. Legislation in preparation by the European Commission may induce, in the near future, European Union Member States to solicit the industries of paints, varnishes and flooring materials for taking measures, in order to reduce the VOC emissions resulting from the use of their products. Therefore, product characterisation and information about the influence of environmental parameters on the VOC emissions are fundamental for providing the basic scientific information required to allow architects, engineers, builders, and building owners to provide a healthy environment for building occupants. On the other hand, the producers of coating building materials require this information to introduce technological alterations, when necessary, in order to improve the ecological quality of their products, and to make them more competitive. Studies of VOC emissions from wet materials, like paints and varnishes, have usually been conducted after applying the material on inert substrates, due to its non-adsorption and non-porosity properties. However, in real indoor environments, these materials are applied on substrates of a different nature. One aim of this work was to study, for the first time, the VOC emissions from a latex paint applied on concrete. The influence of the substrate (uncoated cork parquet, eucalyptus parquet without finishing and pine parquet with finishing) on the emissions of VOC from a water-based varnish was also studied. For comparison purposes, polyester film (an inert substrate) was used for both wet materials. METHODS: The specific emission rates of the major VOCs were monitored for the first 72 h of material exposure in the atmosphere of a standardized test chamber. The air samples were collected on Tenax TA and analysed using thermal desorption online with gas chromatography provided with both mass selective detection and flame ionisation detection. A double exponential model was applied to the VOC concentrations as a function of time to facilitate the interpretation of the results. RESULTS AND DISCUSSION: The varnish, which was introduced in the test chamber 23 h after the application of the last layer of material, emitted mainly glycolethers. Only primary VOCs were emitted, but their concentrations varied markedly with the nature of the substrate. The higher VOC concentrations were observed for the parquets of cork and eucalyptus, which indicated that they have a much higher porosity and, therefore, a higher power of VOC adsorption than the finished pine parquet (and polyester film). The paint was introduced in the chamber just after its application. Only primary VOCs were emitted (esters, phthalates, glycolethers and white spirit) but some compounds, like 2-(2-butoxyethoxy)ethanol and diethylphthalate, were only observed for paint/polyester, which suggested that they were irreversibly adsorbed by the paint/concrete. Compared with the inert substrate, the rate of VOC emissions was lower for concrete in the wet-stage (first hours after the paint application) but slightly higher later (dry-stage) as a consequence of desorption. CONCLUSIONS: As to varnish, the substrates without finishing, like cork and eucalyptus parquets, displayed a higher power of adsorption of VOCs than the pine parquet with finishing, probably because they have a higher porosity. As concerns paint, the total masses of VOCs emitted were lower for concrete than for polyester, indicating that concrete reduces the global VOC emissions from the latex paint. Concrete is seen to have a strong power of adsorption of VOCs. Some compounds, namely 2-(2-butoxyethoxy)ethanol, diethylphthalate and TEXANOL (this partially), were either irreversibly adsorbed by the concrete or desorbed very slowly (at undetected levels). A similar behaviour had not been reported for gypsum board, a paint substrate studied before. RECOMMENDATIONS AND OUTLOOK: The present data suggest that concrete may be a recommendable substrate for paint in an indoor environment. As the nature of the substrate conditions the rate and nature of VOC emissions from wet materials, it must be explicit when emissions from composite materials are reported, in order to allow comparisons and labelling of the product in terms of indoor air quality.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

用于智能建筑的环境安全监控系统

本论述了基于3c技术(控制技术、计算机技术、通信技术)的智能建筑安全监测控制的发展趋势，并介绍了作设计的智能建筑(智能小区)的环境安全监控系统。该系统是基于Lonworks现场总线技术的DCS系统，实现智能建筑中的温湿度、各种可燃性、有毒性气体以及火灾的监测控制和报警输出。     

三峡工程建筑废水排放对长江水质影响的模拟

对三峡工程建筑污水和受纳此污水的长江进行了水质监测 ,模拟计算了其浓度分布范围 ,对数值模型进行了校核 ,并在此基础上对最不利情况进行了预测。在长江划出了受纳其废水的混合区域 ,对混凝土骨料加工生产废水排放标准的制定具有参考价值。     

Production and biomass accumulation of periphytic diatoms growing on glass slides during a 1-year cycle in a subtropical estuarine environment (Bay of Paranaguá, southern Brazil)

Production rates, chlorophyll concentrations and general composition of periphytic diatom communities growing on glass slides were studied in relation to environmental parameters during one seasonal cycle in the Bay of Paranaguá, southern Brazil. Slides were routinely submersed at 1, 2 and 3 m depth and recovered weekly for microscopic examinations, analyses of chlorophyll, cell counts and in situ photosynthetic incubations using the Winkler titration method. Water samples were also collected at surface and bottom layers for determinations of temperature, salinity, nutrients and chlorophyll in the water. The periphytic community was mainly formed by epipelic and epipsammic species, dominated by Navicula phyllepta, Cylindrotheca closterium, Navicula spp. and Amphora sp. Weekly chlorophyll a and cell accumulations on slides varied from <1–32 mg m⁻² and up to 31 × 10⁸cells m⁻², respectively. Photosynthetic rates varied from <1 to 35 mg oxygen mg chlorophyll a ⁻¹ h⁻¹, with higher values in summer. Daily production varied from 5 to 3,600 mg oxygen m⁻² day⁻¹ (<0.01–1.4 g carbon m⁻² day⁻¹). Multiple regression analysis revealed that vertical differences in light conditions and grazing pressure jointly affected the influence of temperature on the seasonal patterns of cell densities and chlorophyll concentrations according to depth. Received: 27 April 2000 / Accepted: 16 August 2000