Enrichment of trace elements in the clay size fraction of mining soils

Reactive waste dumps with sulfide minerals promote acid mine drainage (AMD), which results in water and soil contamination by metals and metalloids. In these systems, contamination is regulated by many factors, such as mineralogical composition of soil and the presence of sorption sites on specific mineral phases. So, the present study dedicates itself to understanding the distribution of trace elements in different size fractions (<2-mm and <2-μm fractions) of mining soils and to evaluate the relationship between chemical and mineralogical composition. Cerdeirinha and Penedono, located in Portugal, were the waste dumps under study. The results revealed that the two waste dumps have high degree of contamination by metals and arsenic and that these elements are concentrated in the clay size fraction. Hence, the higher degree of contamination by toxic elements, especially arsenic in Penedono as well as the role of clay minerals, jarosite, and goethite in retaining trace elements has management implications. Such information must be carefully thought in the rehabilitation projects to be planned for both waste dumps.     

First inter-laboratory comparison exercise for the determination of anticancer drugs in aqueous samples

The results of an inter-laboratory comparison exercise to determine cytostatic anticancer drug residues in surface water, hospital wastewater and wastewater treatment plant effluent are reported. To obtain a critical number of participants, an invitation was sent out to potential laboratories identified to have the necessary knowledge and instrumentation. Nine laboratories worldwide confirmed their participation in the exercise. The compounds selected (based on the extent of use and laboratories capabilities) included cyclophosphamide, ifosfamide, 5-fluorouracil, gemcitabine, etoposide, methotrexate and cisplatinum. Samples of spiked waste (hospital and wastewater treatment plant effluent) and surface water, and additional non-spiked hospital wastewater, were prepared by the organising laboratory (Jo?ef Stefan Institute) and sent out to each participant partner for analysis. All analytical methods included solid phase extraction (SPE) and the use of surrogate/internal standards for quantification. Chemical analysis was performed using either liquid or gas chromatography mass (MS) or tandem mass (MS/MS) spectrometry. Cisplatinum was determined using inductively coupled plasma mass spectrometry (ICP-MS). A required minimum contribution of five laboratories meant that only cyclophosphamide, ifosfamide, methotrexate and etoposide could be included in the statistical evaluation. z-score and Q test revealed 3 and 4 outliers using classical and robust approach, respectively. The smallest absolute differences between the spiked values and the measured values were observed in the surface water matrix. The highest within-laboratory repeatability was observed for methotrexate in all three matrices (CV?≤?12 %). Overall, inter-laboratory reproducibility was poor for all compounds and matrices (CV 27–143 %) with the only exception being methotrexate measured in the spiked hospital wastewater (CV?=?8 %). Random and total errors were identified by means of Youden plots.     

Biodegradability of the anticancer drug etoposide and identification of the transformation products

Etoposide susceptibility to microbiological breakdown was studied in a batch biotransformation system, in the presence or absence of artificial wastewater containing nutrients, salts and activated sludge at two concentration levels. The primary focus of the present study was to study etoposide transformation products by ultra-high performance liquid chromatography coupled to high-resolution hybrid quadrupole-Orbitrap tandem mass spectrometry (MS/MS). Data-dependent experiments combining full-scan MS data with product ion spectra were acquired to identify the molecular ions of etoposide transformation products, to propose the molecular formulae and to elucidate their chemical structures. Due to the complexity of the matrix, visual inspection of the chromatograms showed no clear differences between the controls and the treated samples. Therefore, the software package MZmine was used to facilitate the identification of the transformation products and speed up the data analysis. In total, we propose five transformation products; among them, four are described as etoposide transformation products for the first time. Even though the chemical structures of these new compounds cannot be confirmed due to the lack of standards, their molecular formulae can be used to target them in monitoring studies.     

1,4-Dioxane removal from water and membrane fouling elimination using CuO-coated ceramic membrane coupled with ozone

Environmental Science and Pollution Research - 1,4-Dioxane is a synthetic cyclic ether traditionally used as a chlorinated solvent stabilizer. It is a small molecule and recalcitrant compound that...     

Pleasure in using adaptive cruise control: A questionnaire study in The Netherlands

Objective: Adaptive cruise control (ACC), a technology that allows for automated car following, is becoming increasingly prevalent. Previous surveys have shown that drivers generally regard ACC as pleasant but that they have to intervene when the ACC reaches its operational limits. The former research has been mostly concerned with specific car brands and does not fully reflect the diversity of ACC types in traffic today. The objective of the present research was to establish the determinants of pleasure in using ACC.

Methods: A 55-item online questionnaire was completed by Dutch users of diverse ACC systems.

Results: Respondents (N = 182) rated their ACC highly, with a mean score of 8.0 on a scale from 1 (extraordinarily negative) to 10 (extraordinarily positive) and were most pleased with ACC on high-speed roads and in low-density traffic. Moreover, the findings point to specific operational limits such as associated with cut-in situations. Pleasure was greater for the types of ACC that are able to decelerate to a full stop, according to 48% of our sample. An analysis of the free-response items indicated that respondents who were displeased with ACC mentioned its occasional clumsiness and the dangerous situations it may evoke, whereas those who were pleased with ACC valued the complementarity of human and machine and emphasized the roles of responsibility and experience in using ACC.

Conclusion: Pleasure in using ACC is a function of both technological advances and human factors.     

The behaviour of ashes and heavy metals during the co-combustion of sewage sludges in a fluidised bed

Co-combustion tests of dry sewage sludges with coal were performed in a pilot bubbling FBC aiming at the characterization of ashes and determining the behaviour of heavy metals in the process. The tests showed compliance with the regulatory levels as far as heavy metal emissions were concerned. The bottom ashes, which accounted for about 70% of the total ash production, were obtained in a granular form, with diameters ranging from 0.5 to 4 mm. The heavy metals were distributed in ashes obtained from different locations of the installation and their concentrations were found to vary depending on the location of capture. The increase in heavy metals content in bottom ashes was not found to lead to higher leachability and ecotoxicity compared to sewage sludges, suggesting that there could be opportunities for their further use. Mercury suffered vaporisation inside the reactor, thus leaving bottom ashes free of contamination by it. However, there was observed a strong retention of mercury in cyclone ashes due to the presence of unburned carbon which probably acted as an adsorbent. The effluent mercury was also found to be mostly associated with the particulate fraction, being less than 20% emitted in gaseous forms. The results suggested that the combustion of the sewage sludge could successfully be carried out and the amount of unburned carbon leaving the combustor but captured in cyclone was large enough to ensure substantial retention of mercury at low temperatures, hence could contribute to an improvement of the mercury release which still remains an issue of great concern to resolve during combustion of waste materials.     

Structure-biodegradation relationships of polymeric materials. 1. Effect of degree of oxidation on biodegradability of carbohydrate polymers

The biodegradability of oxidized starch and inulin has been studied in relation to the degree of periodate oxidation to dialdehyde derivatives, by measuring oxygen consumption and mineralization to carbon dioxide. A higher degree of oxidation of dialdehyde starch and dialdchyde inulin results in a lower rate at which the polymers are biodegraded. It is demonstrated that the biodegradation rate of dialdehyde inulin derivatives decreases more than that of equivalent starch derivatives. The differences in biodegradation behavior between dialdehyde starch and dialdehyde inulin, resulting from comparable modifications, are discussed in terms of conformational structure.     

Monitoring nitrate leaching from submerged drains

Monitoring nitrate N (NO3-N) leaching is important in order to judge the effect that agricultural practices have on the quality of ground water and surface water. Measuring drain discharge rates and NO3-N concentrations circumvents the problem of spatial variability encountered by other methods used to quantify NO3-N leaching in the field. A new flow-proportional drainage water sampling method for submerged drains has been developed to monitor NO3-N leaching. Both low and high discharge rates can be measured accurately, and are automatically compensated for fluctuations in ditch-water levels. The total amount of NO3-N leached was 10.6 kg N ha(-1) for a tile-drained silt-loam soil during the 114-d monitoring period. The NO3-N concentrations fluctuated between 5 mg L(-1) at deep ground water levels and 15 mg L(-1) at shallow levels, due to variations in water flow. A flow-proportional drainage water sampling method is required to measure NO3-N leaching accurately under these conditions. Errors of up to 43% may occur when NO3-N concentrations in the drainage water are only measured at intervals of 30 d and when the precipitation excess is used to estimate cumulative NO3-N leaching. Measurements of NO3-N concentrations in ground water cannot be used to accurately estimate NO3-N leaching in drained soils.     

Temporal and spatial trend analysis of surface water quality in the Doce River basin,Minas Gerais,Brazil

In Brazil, specifically in the Doce River basin, there is still a great lack of studies on temporal and spatial trends in water quality, since the water quality in the monitoring campaigns is basically evaluated when it comes down to the concentrations of monitored variables. In this sense, the objective of this work was to perform a temporal and spatial trend analysis of water quality data in the Minas Gerais portion of the Doce River basin, Brazil. For this, the Mann–Kendall, seasonal Mann–Kendall and Spearman correlation tests were used in the temporal analysis and the cluster analysis in the spatial analysis. In the analysis of temporal trends, the analyses were performed using the values of the National Sanitation Foundation Water Quality Index (NSFWQI) and the variables that compose it. In the analysis of spatial trends, the stations were evaluated only based on the WQI. With the results of the analysis of temporal trend, it was identified that most stations did not present a statistically significant trend for the WQI. In the stations that presented trends of quality reduction, most of them are in densely populated areas, demonstrating the strong influence of the poor sanitary conditions of the municipalities to the water quality of the basin. When analyzing the variables that compose the WQI, the results found for nitrate demonstrated that water quality deterioration is also affected by the diffuse pollution originating from farming areas. The results for Escherichia coli reinforced the impact of the discharge of domestic effluents and demonstrated the absence of a significative trend is still of concern because it can represent the maintenance of a degradation state in the water bodies. In the spatial trend analysis, the CA grouped the monitoring stations into six clusters based on their similarity among the WQI values, and, together with the results of the other analyses, it was verified that the Caratinga River basin (UGRH5 Caratinga) presented the highest degree of pollution. It was also possible to identify five stations that can be reallocated or deactivated since they have similarities with other stations located in the same watercourse.