Differentiation of nitrous oxide emission factors for agricultural soils

Nitrous oxide (N₂O) direct soil emissions from agriculture are often estimated using the default IPCC emission factor (EF) of 1%. However, a large variation in EFs exists due to differences in environment, crops and management. We developed an approach to determine N₂O EFs that depend on N-input sources and environmental factors. The starting point of the method was a monitoring study in which an EF of 1% was found. The conditions of this experiment were set as the reference from which the effects of 16 sources of N input, three soil types, two land-use types and annual precipitation on the N₂O EF were estimated. The derived EF inference scheme performed on average better than the default IPCC EF. The use of differentiated EFs, including different regional conditions, allows accounting for the effects of more mitigation measures and offers European countries a possibility to use a Tier 2 approach.     

Air pollution assessment based on elemental concentration of leaves tissue and foliage dust along an urbanization gradient in Vienna

Foliage dust contains heavy metal that may have harmful effects on human health. The elemental contents of tree leaves and foliage dust are especially useful to assess air environmental pollution. We studied the elemental concentrations in foliage dust and leaves of Acer pseudoplatanus along an urbanization gradient in Vienna, Austria. Samples were collected from urban, suburban and rural areas. We analysed 19 elements in both kind of samples: aluminium, barium, calcium, copper, iron, potassium, magnesium, sodium, phosphor, sulphur, strontium and zinc. We found that the elemental concentrations of foliage dust were significantly higher in the urban area than in the rural area for aluminium, barium, iron, lead, phosphor and selenium. Elemental concentrations of leaves were significantly higher in urban than in rural area for manganese and strontium. Urbanization changed significantly the elemental concentrations of foliage dust and leaves and the applied method can be useful for monitoring the environmental load.     

Transfer functions for solid-solution partitioning of cadmium for Australian soils

To assess transport and ecotoxicological risks of metals, such as cadmium (Cd) in soils, models are needed for partitioning and speciation. We derived regression-based “partition-relations” based on adsorption and desorption experiments for main Australian soil types. First, batch adsorption experiments were carried out over a realistic range of dissolved Cd concentrations in agricultural soils in Australia. Results showed linear sorption relationships, implying the adequacy of using Kd values to describe partitioning. Desorption measurements were then carried out to assess in-situ Kd values and relate these to soil properties The best transfer functions for solid-solution partitioning were found for Kd values relating total dissolved Cd concentration to total soil Cd concentrations, accounting for the variation in pH, SOM contents and DOC concentrations. Model predictions compared well with measurements of an independent data set, but there was a tendency to underestimate dissolved Cd concentrations of highly polluted soils.     

Indoor and outdoor sources of size-resolved mass concentration of particulate matter in a school gym—implications for exposure of exercising children

Introduction  

It has been noticed many times that schools are buildings with high levels of particulate matter concentrations. Several authors documented that concentrations of particulate matter in indoor school microenvironments exceed limits recommended by WHO namely when school buildings are situated near major roads with high traffic densities. In addition, exercise under conditions of high particulate concentrations may increase the adverse health effects, as the total particle deposition increases in proportion to minute ventilation, and the deposition fraction nearly doubles from rest to intense exercise.     

Occupational exposure to formaldehyde in an institute of morphology in Brazil: a comparison of area and personal sampling

Background, aims, and scope

Formaldehyde (FA) is a harmful chemical, which is classified as carcinogenic to humans (Group 1) by the International Agency for Research on Cancer. Solutions of FA that are used to preserve cadavers in research and education morphological institutes represent a risk to occupational health of professionals and students. During the dissection of cadavers in the anatomy laboratories, FA vapors are emitted, resulting in the exposure of students and their instructors to elevated levels of FA. The World Health Organization recommends an air quality guideline value of 0.1 mg m^?3 for exposure to FA. The limit of occupational exposure adopted by the Brazilian legislation (2.3 mg m^?3) is markedly higher than those adopted by institutions of other countries around the world. The purpose of this study was to determine the levels of personal exposure and the area concentration of FA in the morphology department of the Federal Fluminense University, Brazil, and investigate and compare the relationship between them.

Methods

Four rooms distributed in the three floors of the Morphology Department were evaluated: the embalming laboratory, the anatomy laboratories, the corridor of the teachers?? rooms, and the entrance hall. Thirty-six samples in total were collected in the second semester of 2010 and first semester of 2011. The air sampling and FA analysis were performed according to the EPA TO-11A Protocol, using a diffusive sampling device for carbonyl compounds. Personal samples were collected from monitors using a sampling device pinned on each person??s lapel. The samples were analyzed using rapid resolution liquid chromatography with UV-DAD detection at 360 nm.

Results and discussion

The concentrations of FA ranged from 0.20 and 0.18 mg m^?3 in the corridor between the teachers?? rooms, 0.03 to 0.37 mg m^?3 in the entrance hall, 0.22 to 2.07 mg m^?3 in the anatomy laboratory, 2.21 to 2.52 mg m^?3, in the embalming room. The levels found in the corridor between the teachers?? rooms and in the entrance hall were lower than in other compartments because of their large distances to the sources of FA and better ventilation. The other rooms presented higher levels of FA because of the activities carried there (embalming and dissection procedures). Even in the rooms that showed the lowest levels of FA, the values found were higher than those established by all international guideline limits, except the Brazilian legislation limit, although, the concentration level in the embalming room was even greater than the Brazilian guideline. These concentrations are 100?C1,000-fold higher than those reported in an FA outdoor study. The exposure levels of monitors and students ranged from 1.89 to 4.82 mg m^?3, indicating that current practices at the Morphology Department at the university would represent a health risk. The simultaneous monitoring of area concentrations and personal exposure showed that the characteristics of classes and of cadavers?? parts, the number of students in the room and even the activities of the monitors influence the FA concentrations.

Conclusion

This study revealed that the concentration of FA was low in the ventilated areas of the Morphology Department, and that the personal exposure when the person was close to the cadavers during the dissection procedure was higher than the mean FA concentration. This should be considered in the risk assessment of FA during these activities without effective protection equipment. It is suggested that the Brazilian legislation of exposure to formaldehyde requires an urgent update considering international legislation.     

Sediment contact test with <Emphasis Type="Italic">Potamopyrgus antipodarum</Emphasis> in effect-directed analyses—challenges and opportunities

Background and scope  

Effect-directed analysis is increasingly used for the identification of key toxicants in environmental samples and there is a growing need for in vivo biotests as diagnostic tools. Within this study, we performed an in vivo sediment contact test, applicable on both native field samples and their extracts or fractions, in order to be able to compare the results from both field and laboratory studies.     

Dietary exposure of rainbow trout to 8:2 and 10:2 fluorotelomer alcohols and perfluorooctanesulfonamide: Uptake, transformation and elimination

The bioaccumulation of perfluorooctanesulfonamide (PFOSA) and two fluorotelomer alcohols (8:2 FTOH, 10:2 FTOH) by rainbow trout (Oncorhynchus mykiss) through dietary exposure, including depuration rates and metabolism was investigated. Concentrations in the spiked feed ranged from 10.9 μg g⁻¹ wet weight (wet wt) for PFOSA and 6.7 μg g⁻¹ wet wt for 8:2 FTOH to 5.0 μg g⁻¹ wet wt for 10:2 FTOH. Trout was fed at 1.5% body weight per day for 30 d and depuration was followed for up to 30 d following previously published dietary exposure protocols. Perfluorooctanesulfonate (PFOS) was the major perfluoroalkylsulfonate (PFSA) detected in fish following dietary exposure to PFOSA. Half-lives of PFOS and PFOSA were 16.9 ± 2.5 and 6.0 ± 0.4 d, respectively. A biomagnification factor (BMF) of 0.023 was calculated for PFOSA which indicates that dietary exposure to PFOSA does not result in biomagnification in the rainbow trout. PFOS had a BMF of 0.08. The fluorotelomer saturated acids (8:2 FTCA, 10:2 FTCA) and fluorotelomer unsaturated acids (8:2 FTUCA, 10:2 FTUCA) were the major products detected in rainbow trout following dietary exposure to 8:2 FTOH and 10:2 FTOH, respectively. Half-lives were 3.7 ± 0.4, 2.1 ± 0.5, 3.3, and 1.3 d for 10:2 FTCA, 10:2 FTUCA, 8:2 FTCA, and 8:2 FTUCA, respectively. Small amounts of perfluorooctanoate (PFOA) and perfluorodecanoate (PFDA) were also detected in the FTOH exposed fish.     

Effects of municipal solid waste compost and mineral fertilizer amendments on soil properties and heavy metals distribution in maize plants (Zea mays L.)

Soil amendments based on crop nutrient requirements are considered a beneficial management practice. A greenhouse experiment with maize seeds (Zea mays L.) was conducted to assess the inputs of metals to agricultural land from soil amendments. Maize seeds were exposed to a municipal solid waste (MSW) compost (50 Mg ha⁻¹) and NPK fertilizer (33 g plant⁻¹) amendments considering N plant requirement until the harvesting stage with the following objectives: (1) determine the accumulation of total and available metals in soil and (2) know the uptake and ability of translocation of metals from roots to different plant parts, and their effect on biomass production. The results showed that MSW compost increased Cu, Pb and Zn in soil, while NPK fertilizer increased Cd and Ni, but decreased Hg concentration in soil. The root system acted as a barrier for Cr, Ni, Pb and Hg, so metal uptake and translocation were lower in aerial plant parts. Biomass production was significantly enhanced in both MSW and NPK fertilizer-amended soils (17%), but also provoked slight increases of metals and their bioavailability in soil. The highest metal concentrations were observed in roots, but there were no significant differences between plants growing in amended soil and the control soil. Important differences were found for aerial plant parts as regards metal accumulation, whereas metal levels in grains were negligible in all the treatments.