Chemical recognition of queen cells by honey bee workersApis mellifera (Hymenoptera: Apidae)

Summary Honey bee workers are able to nurse or to destroy and thus to recognize the capped queen cells containing a pupa. Fatty acid esters, especially methyl oleate, methyl palmitate and ethyl oleate were found in significant amounts on the queen pupal cuticle. Methyl oleate, the major component, along with smaller amounts of methyl linoleate and methyl linolenate, were involved in the recognition of queen cells by workers. In natural conditions of the colony, queen cells containing a paraffin pupal lure with methyl oleate were accepted 5.9 days by workers, releasing about 1.8 queen pupa equivalents during that period, when control cells (without ester) were kept only 2.1 days. Although these esters are non specific to honey bees, they are of great importance in social regulation of the honey bee colony.     

Melanin-based colour polymorphism signals aggressive personality in nest and territory defence in the tawny owl (Strix aluco)

Nest and territory defence are risky and potentially dangerous behaviours. If the resolution of life history trade-offs differs between individuals, the level of defence may also vary among individuals. Because melanin-based colour traits can be associated with life history strategies, differently coloured individuals may display different nest and territory defence strategies. We investigated this issue in the colour polymorphic tawny owl (Strix aluco) for which plumage varies from dark to light reddish melanic. Accordingly, we found that (1) our presence induced a greater response (flying around) from dark-coloured than light-coloured females and (2) dark reddish males suffered lower nest predation rates than light-coloured males. In experimentally enlarged broods, the probability that females reacted after we played back the hoot calls of a stranger male was higher if these females were lighter reddish; the opposite pattern was found in experimentally reduced broods with dark parents being more reactive than light parents. Finally, darker females alarmed more frequently when paired with a light than with a dark male, suggesting that partners adjust their behaviour to each other. We also tested whether colouration is used as a signal by conspecifics to adjust the level of their defensive behaviour. Accordingly, breeding females responded more vigorously to a dark than a light reddish stuffed tawny owl placed beside their nest. We conclude that melanin-based colouration is a signal of alternative nest and territory defence behaviour that depends on ecological factors.     

Retention of PCDDS and PCDFS in the liver of the rat and hamster after oral administration of a municipal incinerator fly ash extract

A single dose of an extract from 16 and 5 grams fly ash was administered orally to male rats and hamsters. In the rat 1,2,3,7,8‐PnCDD had the highest retention (41%) in the liver. The congener with the highest retention in the liver of the hamster was 2,3,4,7,8‐PnCDF (70.9%). In two oral multiple dose experiments with rats, highest liver retentions were found for 1,2,3,7,8‐PnCDD (51.7%) and 1,2,3,6,7,8‐HxCDD (59.8%). With the exception of 2,3,4,6,7‐PnCDF, all PCDDs and PCDFs retained in the liver of rat and hamster had a 2,3,7,8 chlorine substitution pattern. In both types of experiments with rats the retention of 2,3,7,8‐TCDF in the liver was very low, 1.1–2.8% of the total dose. In the liver of the hamster retention of 2,3,7,8‐TCDF was almost equal to that of 2,3,7,8‐TCDD, indicating that the hamster is probably metabolizing 2,3,7,8‐TCDF Jess efficiently than the rat. In all experiments 1,2,3,7,8‐PnCDD and 2,3,4,7,8‐PnCDF were retained in the liver more efficiently than 2,3,7,8‐TCDD. Based on first order pharmacokinetic calculations, it was found that the earlier published k_e value of 0.55 for 2,3,7,8‐TCDF in the liver of the rat was also applicable. Using the same calculations for 2,3,7,8‐TCDD (k_e = 0.029) a 30% difference was found between calculated and actual measurements, but calculated results were still within the 95% confidence limits of the actual measurements.     

Measurement method for objective cyclist behavior parameters

Abstract

Objective: The objective of this research is to study the feasibility of measuring behavioral indicators that reflect effects of infrastructure and interaction with other road users.

Methods: An observation study was performed using 6 cameras above a separated cycle path next to a road which included a crossing with both cyclists and cars. A learning method based on Single Shot MultiBox Detector was applied to automatically detect the cyclists, and cyclist tracks were determined. Next, kinematic parameters were calculated from the cyclists’ tracks. Amongst others, the cyclists’ intensity, speed, position on the cycle path, and the distance to each other were analyzed for a busy period as well as for a quiet period of the day.

Results: With the measurement method developed in this study it is possible to analyze the cyclists’ intensity, the space they use at the cycle path, their average velocity, waiting times, the space and velocity amongst each other, and red light negation. However, collisions were not seen in the dataset analyzed, and the data is not sufficiently accurate to analyze sudden braking actions.

Conclusion: It can be concluded that the developed measurement method provides insight of the cyclists’ behavior in such a way that it can already be used for obtaining information to make changes to the infrastructure that will improve the comfort and safety of cyclists. The method could be further developed for doing qualitative comfort and safety analyses, and for doing analyses of the interaction between various types of road participants.     

Is external contamination with organic pollutants important for concentrations measured in bird feathers?

Although there is increasing evidence that bird feathers can be used as a non-destructive biomonitoring tool for organic pollutants [such as polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and p,p'-dichlorodiphenyl-trichloroethane and metabolites (DDTs)], the importance of external contamination of these organic pollutants onto the feathers has not been considered. Here we examine to which extent external contamination of organic pollutants occurs onto the feathers of a predatory bird. We have analysed primary wing feathers of 16 common buzzards (Buteo buteo) collected in Belgium. In order to study differences in external contamination within and among wing feathers, the vane and the shaft of each feather were separated and were analysed in parallel, pooled for the three inner and the three outer primary wing feathers. Most organic pollutants could be measured in these pooled samples of both the vane and the shaft. Concentrations of hexachlorobenzene (HCB), DDTs, PCBs and PBDEs were significantly higher in the vane compared to the shaft. The profiles of PCBs and PBDEs in the shaft closely resembled the profiles in liver and muscle tissue, in contrast with the profile of the vane. The PBDE congeners 47, 99 and 153 had a similar contribution in shafts of primary feathers of common buzzards. Although these results suggest that external contamination could be important on the vane, no differences in the profile of PBDEs or PCBs were found between the inner and outer (more exposed) primary feathers. Furthermore, correlation coefficients with internal tissues were not univocally distinct between the shaft and the vane. Therefore our results indicate that the higher concentrations found in the vane in comparison to the shaft do not originate from external contamination via the air, but that other factors such as structure and chemical properties of the feathers may be of importance. The lack of significant external contamination onto the feather surface is an additional asset for the use of feathers as a non-destructive biomonitor for organic pollutants.     

Slip Resistance of Industrial Floor Surfaces: Development of an Elastomer Suited to In-Situ Measurement

Slips contribute to 12% of occupational accidents. A slip resistant floor is a mean to prevent slipping accidents occurring in workshops. Floor slip resistance is often evaluated by measuring a friction index, proportional to the force opposing slipping of a reference elastomer on the floor surface under test. When implementing a portable appliance, slip resistance measurements carried out on lubricated floors were not stabilized. The authors advanced the hypothesis of oil impregnating the elastomer. A new elastomer suited to in-situ measurement has been developed to achieve stable measuring conditions. This study highlights the fact that the nature and characteristics of a reference elastomer must be specified when slip resistance measurements are carried out.     

An experimental study on the temperature dependence of CO2 explosive evaporation

The need for transportation and storage of CO₂ in bulk quantities is likely to increase in the near future. The handling of CO₂ on such scale gives rise to a number of technological challenges and safety aspects. The accidental rupture of a vessel containing liquefied CO₂ may lead to a Boiling Liquid Expanding Vapour Explosion (BLEVE). Whether explosive evaporation of liquefied CO₂ is also possible at storage temperatures below the homogeneous nucleation temperature 271 K (?2 °C) is unclear.This article describes the results of 12 experiments with 40 L CO₂ cylinders at various temperatures to investigate the temperature dependence of explosive evaporation. The cylinders were opened with linear shaped charges to simulate a near instantaneous rupture, and blast was measured at various locations. The observed blast could be clearly attributed to explosive evaporation. The results show that below the homogeneous nucleation temperature, BLEVE blast does not disappear abruptly, but instead follows a gradual decay. Predictions with a numerical BLEVE blast model overestimate the observed blast peak overpressure and impulse, but qualitatively show a similar behaviour. The energy lost by the acceleration of the cylinder parts is a possible reason for overestimations of the model.The consequence of the test results is that for accident scenarios with CO₂ at low temperatures a BLEVE should not be neglected in hazard assessments. Future large scale bulk storage will take place at a 10⁵ times larger volume than the cylinders applied in the current small scale experiments. We expect that the blast-reducing effects of a tank shell will disappear at such scale.The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007–2013) under grant agreement n° 241381.     

A quantitative risk assessment tool for the external safety of industrial plants with a dust explosion hazard

A quantitative risk assessment (QRA) tool has been developed by TNO for the external safety of industrial plants with a dust explosion hazard. As a first step an industrial plant is divided into groups of modules, defined by their size, shape, and constructional properties. Then the relevant explosion scenarios are determined, together with their frequency of occurrence. These include scenarios in which one module participates, as well as domino scenarios. The frequency is partly based on casuistry.

A typical burning velocity is determined depending on the ignition type, the dust properties and the local conditions for flame acceleration. The resulting pressure development is predicted with the ‘thin flame model’. Module failure occurs when the explosion load exceeds thresholds, which are derived from single degree of freedom (SDOF) calculations for various types of modules. A model has been developed to predict the process of pressure venting after module failure and the related motion of launched module parts.

The blast effects of the primary explosion are based on results from calculations with BLAST3D. The blast and flame effects of the secondary external explosion due to venting are calculated using existing models. The throw of fragments and debris is quantified with a recently developed model. This model is based on trajectory calculations and gives the impact densities, velocities, and angles as output. Furthermore the outflow of bulk material is taken into account. The consequences for external objects and human beings are calculated using existing models. Finally the risk contours and the Societal risk (FN curve) are calculated, which can be compared to regulations.     

Calculation of clothing insulation by serial and parallel methods: effects on clothing choice by IREQ and thermal responses in the cold.

Cold protective clothing was studied in 2 European Union projects. The objectives were (a) to examine different insulation calculation methods as measured on a manikin (serial or parallel), for the prediction of cold stress (IREQ); (b) to consider the effects of cold protective clothing on metabolic rate; (c) to evaluate the movement and wind correction of clothing insulation values. Tests were carried out on 8 subjects. The results showed the possibility of incorporating the effect of increases in metabolic rate values due to thick cold protective clothing into the IREQ model. Using the higher thermal insulation value from the serial method in the IREQ prediction, would lead to unacceptable cooling of the users. Thus, only the parallel insulation calculation method in EN 342:2004 should be used. The wind and motion correction equation (No. 2) gave realistic values for total resultant insulation; dynamic testing according to EN 342:2004 may be omitted.