A method for assessing health and safety management systems from the resilience engineering perspective

This article introduces a method for assessing health and safety management systems (MAHS) that has two innovative characteristics: (a) it brings together the three main auditing approaches to health and safety (HS) – the structural approach (which assesses the system prescribed), the operational approach (which assesses what is really happening on the shop-floor) and the performance approach (which assesses the results of performance indicators); (b) it emphasizes the resilience engineering perspective on HS, which takes into consideration four major principles (flexibility, learning, awareness, and top management commitment). Such principles underlie seven major assessment criteria, which in turn are divided into items (e.g. hazard identification from a resilience perspective is an item that belongs to the criteria of production processes). The items are sub-divided into statements, which are the requirements that should be assessed based on interviews, analysis of documents and direct observations. Within the 112 requirements proposed, 38 of them have clear links with at least one out of the four resilience engineering principles adopted. The remaining requirements are based on traditional assumptions underlying the so-called best practices of HS management. The results of the assessment for each item are expressed by a score on a scale of compliance with the established requirements, ranging from 0% to 100%. The specific score within that scale is obtained from tables used to assess applications for the Brazilian national quality award. The MAHS was tested in a case study that was carried out in a factory that manufactures automobile exhaust systems, located in Brazil.     

Mercury and selenium in blue shark (Prionace glauca, L. 1758) and swordfish (Xiphias gladius, L. 1758) from two areas of the Atlantic Ocean

Muscle, liver and stomach contents of 64 blue sharks and 52 swordfishes, caught between September 2004 and February 2005 near the Azores (area A) and the Equator (area E), were analysed for mercury and selenium. Levels of mercury were relatively high (blue shark: 0.032-2.5microgg(-1); swordfish: 0.031-9.8microgg(-1)) and comparable to values reported in the literature. However, mercury and organic mercury concentrations in muscle and liver of specimens from E were significantly higher than those from A. A similar trend was registered in stomach contents, suggesting higher uptake of Hg in specimens from E. This difference was also observed in the relationship between concentration in muscle and size, indicating a higher accumulation rate in specimens from E. The accumulation of Se in the liver of both species showed a positive correlation with inorganic mercury concentrations, pointing to a detoxifying mechanism of organic mercury in these species through Se-Hg liasons.     

Cadmium background concentrations to establish reference quality values for soils of São Paulo State,Brazil

Proper assessment of soil cadmium (Cd) concentrations is essential to establish legislative limits. The present study aimed to assess background Cd concentrations in soils from the state of São Paulo, Brazil, and to correlate such concentrations with several soil attributes. The topsoil samples (n?=?191) were assessed for total Cd contents and for other metals using the USEPA 3051A method. The background concentration was determined according to the third quartile (75th). Principal component analysis, Spearman correlation, and multiple regressions between Cd contents and other soil attributes (pH, cation exchange capacity (CEC), clay content, sum of bases, organic matter, and total Fe, Al, Zn, and Pb levels) were performed. The mean Cd concentration of all 191 samples was 0.4 mg kg^?1, and the background concentration was 0.5 mg kg^?1. After the samples were grouped by parent material (rock origin) and soil type, the background Cd content varied, i.e., soils from igneous, metamorphic, and sedimentary rocks harbored 1.5, 0.4, and 0.2 mg kg^?1 of Cd, respectively. The background Cd content in Oxisols (0.8 mg kg^?1) was higher than in Ultisols (0.3 mg kg^?1). Multiple regression demonstrated that Fe was primarily attributed to the natural Cd contents in the soils (R ²?=?0.79). Instead of a single Cd background concentration value representing all São Paulo soils, we propose that the concentrations should be specific for at least Oxisols and Ultisols, which are the primary soil types.     

Dissolved inorganic nutrients and chlorophyll a in an estuary receiving sewage treatment plant effluents: Cachoeira River estuary (NE Brazil)

Sampling was conducted monthly during a transition period between the dry and rainy seasons in order to evaluate the effectiveness of a municipal sewage treatment plant (STP) in eutrophication control. STP effluent and fluvial input data were also estimated. In the dry period, high concentrations of nutrients, chlorophyll a (up to 360 μg?L^?1), and anoxia in bottom waters were observed in the upper portion of the estuary. Nitrate was scarce during the dry months, although high concentrations were observed at the river sources and the upper estuary. The N:P and Si:P molar ratios were usually below 16:1, and the Si:N ratio was higher than 1:1. The fluvial inputs were a greater source of nutrients to the estuary than the STP, but nutrient loading by these effluents were also important in contributing to the eutrophication of the upper estuarine zone, especially in the dry season when symptoms were more intense.     

Inputs of heavy metals due to agrochemical use in tobacco fields in Brazil’s Southern Region

Only a few studies have assessed the joint incorporation of heavy metals into agricultural systems based on the range of agrochemicals used on a specific agricultural crop. This study was conducted to assess the heavy metals input through application of the main agrochemicals used in Brazilian tobacco fields. A total of 56 samples of different batches of 5 fertilizers, 3 substrates, 8 insecticides, 3 fungicides, 2 herbicides, and 1 growth regulator commonly used in the cultivation of tobacco in Brazil’s Southern Region were collected from 3 warehouses located in the States of Rio Grande do Sul, Santa Catarina, and Paraná. The total As, Cd, Co, Cr, Cu, Hg, Fe, Mn, Ni, Pb, and Zn content of the samples was then determined and compared with the regulations of different countries and information found in the available literature. The fertilizers were identified as the primary source of heavy metals among the agrochemicals used. Application of pesticides directly to the shoots of tobacco plants contributed very little to the supply of heavy metals. The agrochemicals used in Brazilian tobacco fields provide lower inputs of the main heavy metals that are nonessential for plants than those registered in the international literature for the majority of crop fields in different regions of the world.     

Environmental levels of Linear alkylbenzene Sulfonates (LAS) in sediments from the Tagus estuary (Portugal): environmental implications

Sediments from the Tagus estuary (Portugal) were collected at 40 stations in July and December 2004. Total LAS concentrations ranged between 0.03 and 17.76 mg LAS.kg(-1) dry weight in July, and between 0.09 and 9.57 mg LAS.kg(-1) in December. Highest LAS concentrations were found at the upper northern part of the estuary, coincident with the localisation of an important waste water treatment station. According to the Predicted No Effect Concentration (PNEC) of 8.1 mg.kg(-1) derived for this compound, Environmental Risk Assessment (ERA) identified a hazard for the ecosystem at the station with the highest LAS concentration, and similar results are obtained by Equilibrium Partitioning Method (EPM). Nevertheless, LAS concentrations decreased significantly between samplings in the stations with the highest LAS concentrations in July, whereas increased LAS concentrations at adjacent stations were found in December. In the remaining stations, LAS concentrations were up to three orders of magnitude lower, representing no hazard for the sediment community.     

Lead isotope ratios in lichen samples evaluated by ICP-ToF-MS to assess possible atmospheric pollution sources in Havana,Cuba

Epiphytic lichens, collected from 119 sampling sites grown over “Roistonea Royal Palm” trees, were used to assess the spatial distribution pattern of lead (Pb) and identify possible pollution sources in Havana (Cuba). Lead concentrations in lichens and topsoils were determined by flame atomic absorption spectrophotometry and inductively coupled plasma (ICP) atomic emission spectrometry, respectively, while Pb in crude oils and gasoline samples were measured by ICP-time of flight mass spectrometry (ICP-ToF-MS). Lead isotopic ratios measurements for lichens, soils, and crude oils were obtained by ICP-ToF-MS. We found that enrichment factors (EF) reflected a moderate contamination for 71% of the samples (EF > 10). The ²⁰⁶Pb/²⁰⁷Pb ratio values for lichens ranged from 1.17 to 1.20 and were a mixture of natural radiogenic and industrial activities (e.g., crude oils and fire plants). The low concentration of Pb found in gasoline (<7.0 μg L^?1) confirms the official statement that leaded gasoline is no longer used in Cuba.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.