Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials

Sugarcane bagasse ash (SCBA) is a residue resulting from the burning of bagasse in boilers in the sugarcane/alcohol industry. SCBA has a very high silica concentration and contains aluminum, iron, alkalis and alkaline earth oxides in smaller amounts. In this work, the properties of sintered ceramic bodies were evaluated based on the concentration of SCBA, which replaced non-plastic material. The ash was mixed (up to 60 wt%) with a clayed raw material that is used to produce roof tiles. Prismatic probes were pressed and sintered at different temperatures (up to 1200 °C). Technological tests of ceramic probes showed that the addition of ash has little influence on the ceramic properties up to 1000 °C. X-ray diffraction and thermal analysis data showed that, above this temperature the ash participates in the sintering process and in the formation of new important phases. The results reported show that the reuse of SCBA in the ceramic industry is feasible.     

Taxonomic and Functional Responses to Fire and Post-Fire Management of a Mediterranean Hymenoptera Community

Fire is one of the commonest disturbances worldwide, transforming habitat structure and affecting ecosystem functioning. Understanding how species respond to such environmental disturbances is a major conservation goal that should be monitored using functionally and taxonomically diverse groups such as Hymenoptera. In this respect, we have analyzed the taxonomic and functional response to fire and post-fire management of a Hymenoptera community from a Mediterranean protected area. Thus, Hymenoptera were sampled at fifteen sites located in three burnt areas submitted to different post-fire practices, as well as at five sites located in peripheral unburnt pine forest. A total of 4882 specimens belonging to 33 families, which were classified into six feeding groups according to their dietary preferences, were collected. ANOVA and Redundancy Analyses showed a taxonomic and functional response to fire as all burnt areas had more Hymenoptera families, different community composition and higher numbers of parasitoids than the unburnt area. Taxonomic differences were also found between burnt areas in terms of the response of Hymenoptera to post-fire management. In general the number of parasitoids was positively correlated to the number of potential host arthropods. Parasitoids are recognized to be sensitive to habitat changes, thus highlighting their value for monitoring the functional responses of organisms to habitat disturbance. The taxonomic and functional responses of Hymenoptera suggest that some pine-forest fires can enhance habitat heterogeneity and arthropod diversity, hence increasing interspecific interactions such as those established by parasitoids and their hosts.     

Stable isotope analysis in two sympatric populations of bottlenose dolphins <Emphasis Type="Italic">Tursiops truncatus</Emphasis>: evidence of resource partitioning?

Skin and muscle from 43 bottlenose dolphins (38 juveniles/adults, 5 calves) stranded in NW Spain were analysed to determine whether stable isotope ratios (δ¹³C and δ¹⁵N) could be used to assess dietary variation, habitat segregation and population substructure. Results were compared with published stomach contents data. Stable isotope ratios from 17 known prey species were also determined. Isotope ratios of the main prey (blue whiting, hake) varied significantly in relation to fish body size. Dolphin calves showed significant heavy isotope enrichments compared to adult females. Excluding calves, δ¹⁵N decreased with increasing dolphin body size, probably related to an ontogenetic shift in diet towards species at lower trophic levels, e.g. on blue whiting as suggested by stomach content results. Bottlenose dolphins were divided into two putative populations (North, South) based on previous genetic studies, and values of δ¹³C and δ¹⁵N differed significantly between these two groups, confirming the existence of population structuring.     

Effect of unfavorable trophic scenarios on amylase and protease activity of <Emphasis Type="Italic">Nephrops norvegicus</Emphasis> (L.) larvae during their first vertical migration: a laboratory approach

In Portuguese waters, Nephrops norvegicus larvae hatch at 400–800 m depth and need to perform a vertical migration to food-rich shallower waters to find suitable prey. The effect of suboptimal feeding on digestive enzymes activity of N. norvegicus larvae during this early period of their larval life remains unknown. Protease and amylase activities were investigated ex situ using flurometry in laboratory-hatched larvae exposed to different feeding and/or starving scenarios in the 24 h following hatching, the period during which they typically accomplish their upward vertical migration. Amylase activity was very low in comparison with protease activity, indicating that carbohydrates are not a primary energy reserve. Larvae starved for 12 h and subsequently fed displayed no increase in amylase activity, which suggests that feeding may be required before 12 h post-hatch to trigger amylase activity. Protease activity was high under all feeding conditions, and the increase in protease activity under sustained starvation indicated the catabolism of protein reserves. The ability of first-stage N. norvegicus larvae to metabolize protein reserves may play a decisive role for their survival during their first vertical migration, as it enables them to overcome the deleterious effects of short-term starvation and/or suboptimal feeding.     

Assessment and sources of nonaromatic hydrocarbons in surface sediments of three harbors in Santa Catarina State, Brazil

Nonaromatic hydrocarbons and geochemical parameters from 17 sediment?Cwater interface samples were used to assess sources of organic matter in three harbors, located in Santa Catarina State, southern Brazil. The evaluation was based on the molar C/N/P ratios, abundance of resolved nonaromatic hydrocarbons (3.0?C25.9 ??g g^???1), unresolved complex mixture, and two indexes: the carbon preference index (CPI) and the low molecular weight to high molecular weight ratio. The results indicate that the organic matter is predominantly of terrestrial origin (C/N > 10 and CPI > 2). Variations in the total organic carbon from 0.43 to 2.98 mmol g^???1 and total phosphorus from 82.4 to 464.3 ??g g^???1 showed no clear correlation with the silt and clay fractions of the sediments possibly due to anthropogenic input. In contrast to the low level of contamination based on the acyclic hydrocarbon distribution, the results obtained from a series of geologically stable hopanes and steranes reveal the presence of less degradable petroleum derivatives.     

Human factors applied to alarm panel modernization of nuclear control room

Human factors deal with issues related to humans, their behavior and the physical aspect of the environment in which they work. A control room is a complex system where operators perform plant operation using control systems and carry out monitoring and administrative responsibilities. For safe operation of industrial installation, the performance of the control room crew plays an important role. In this respect, a well designed control room is crucial for safe and efficient operation. The aim of this paper is to propose a methodological framework applied to nuclear control room evaluation, through participatory ergonomics, using operator activity analysis and human factors questionnaire as aid tools. We describe a case study in which the methodology framework was used in the evaluation process of a nuclear control room. The information gathered made possible a series of recommendation for the adequacy of the control room design, assisting in the safety assessment of the nuclear plant operation and justifying the alarm panel modernization.     

Phylogeography and evolution of the triplefin <Emphasis Type="Italic">Tripterygion delaisi</Emphasis> (Pisces,Blennioidei)

The genus Tripterygion (Risso 1826) is restricted to the eastern Atlantic and the Mediterranean, and comprises only three species. T. melanuros and T. tripteronotus are essentially endemic to the Mediterranean, while Tripterygion delaisi occurs in the Atlantic and in the Mediterranean. Two subspecies of T. delaisi have been described (T. d. xanthosoma in the Mediterranean and T. d. delaisi in the Atlantic). Several scenarios have been proposed for the evolution of T. delaisi subspecies, but so far its subspeciation process is not clear. In this study we present a population survey of T. delaisi including specimens from the two recognized subspecies. We combined a phylogeographic approach with estimates of the direction of migration (between the Atlantic and the Mediterranean) and of the coalescence time of the two subspecies, using polymorphic mitochondrial and nuclear genes. The results of this study clearly support the existence of two Tripterygion delaisi clades, one in the eastern Atlantic islands and another in the Atlantic coasts of Europe and in the Mediterranean. Historical migration between the islands and Western Europe plus Mediterranean was restricted, and showed a westbound trend, with a higher number of migrants going from the Western Europe plus Mediterranean into the islands. We estimated the time of coalescence of both groups of T. delaisi to be more recent than the onset of Pleistocene glaciations (1.7 Mya). Our results are consistent with previous hypothesis that consider successive dispersal events of a Tripterygion ancestor from the western African coast colonizing the Atlantic islands and the Mediterranean, promoting the evolutionary divergence between these areas.     

Comparative sediment quality assessment in different littoral ecosystems from Spain (Gulf of Cadiz) and Brazil (Santos and São Vicente estuarine system)

The goal of this work was to establish comparisons among environmental degradation in different areas from Southern Spain (Gulf of Cádiz) and Brazil (Santos and S?o Vicente estuary), by using principal component analyses (PCA) to integrate sediment toxicity (amphipods mortality) and chemical-physical data (Zn, Cd, Pb, Cu, Ni, Co, V, PCBs, PAHs concentrations, OC and fines contents). The results of PCA extraction of Spanish data showed that Bay of Cádiz, CA-1 did not present contamination or degradation; CA-2 exhibited contamination by PCBs, however it was not related to the amphipods mortality. Ría of Huelva was the most impacted site, showing contamination caused principally by hydrocarbons, in HV-1 and HV-2, but heavy metals were also important contaminants at HV-1, HV-2 and HV-3. Algeciras Bay was considered as not degraded in GR-3 and -4, but in GR-3' high contamination by PAHs was found. In the Brazilian area, the most degraded sediments were found in the stations situated at the inner parts of the estuary (SSV-2, SSV-3, and SSV-4), followed by SSV-6, which is close to the Submarine Sewage Outfall of Santos - SSOS. Sediments from SSV-1 and SSV-5 did not present chemical contamination, organic contamination or significant amphipod mortality. The results of this investigation showed that both countries present environmental degradation related to PAHs: in Spain, at Ría of Huelva and Gudarranque river's estuary areas; and in Brasil, in the internal portion of the Santos and S?o Vicente estuary. The same situation is found for heavy metals, since all of the identified metals are related to toxicity in the studied areas, with few exceptions (V for both Brazil and Spain, and Cd and Co for Brazilian areas). The contamination by PCBs is more serious for Santos and S?o Vicente estuary than for the investigated areas in Gulf of Cádiz, where such compound did not relate to the toxicity.     

Improving the environmental performance of machine-tools: influence of technology and throughput on the electrical energy consumption of a press-brake

Machine-tools have been identified as one of the main energy-using products to be analyzed in an Ecodesign perspective, targeting the reduction of their environmental impact. Following this, machine-tool manufacturers are committed to anticipate eminent regulations and are looking for guidelines to improve their products on an effective and low-cost manner. This paper describes part of the energy consumption study followed in the frame of the Ecodesign of a commercial press-brake. All-hydraulic and all-electric commercially available systems, of different capacities and working in real production scenarios, have been included. From this study, a preliminary version of an LCI dataset for the bending process is proposed, structured in technology, machine capacity and usage mode categories, and using the bending cycle as the reference unit. The energy consumption per category was estimated based on a specific process energy model built as a function of the referred parameters. The contribution of the respective machine-tool structure to the environmental impact of the machining process is to be included, targeting the completion of such machining unit process dataset. The full LCA of an all-hydraulic system revealed the significant contribution of the machine-tool structure to the global life-cycle environmental impact of the machine (about 40%), while electricity during use phase contributes with about 46% to the total impact. This contradicts the general results published for other metal and non-metal forming processes, and is understood to be related with the discrete loading character of such forming processes here discussed.     

Morphological responses and tolerance of a tree native to the Brazilian Cerrado Astronium fraxinifolium Schott to boron toxicity

Environmental Science and Pollution Research - The indiscriminate use of fertilizers and chemical pesticides can lead to boron contamination of the soil. Decontamination in general is expensive and...