Relationship between epiphytic lichens, trace elements and gaseous atmospheric pollutants

A study was conducted to determine the joint effect of gaseous atmospheric pollutants and trace elements on epiphytic lichens. We used our data to test the hypothesis that lichens are generally insensitive to toxic effects of trace elements, and can therefore be used as accumulator organisms to estimate concentrations of these elements in the environment. In a field study in The Netherlands the abundance of epiphytic lichen species was estimated, and their supporting bark was collected. Concentrations of a range of trace elements were determined in the bark, and concentrations of atmospheric trace gases were estimated at the sites of collection. Multivariate statistics were used to determine the relation between the abundance of the species and pollutant concentrations. Atmospheric SO2 and NO2 appeared to be the most important factors determining lichen biodiversity. Nearly all species were sensitive to these compounds. The effect of the other trace elements was very slight; only Sb had a significantly negative effect on the abundance of a few species. It is concluded that lichens can safely be used as accumulator organisms in pollution studies, provided that concentration in lichen thalli reflect atmospheric concentrations.     

Intercomparison of reactive transport models applied to UO2 oxidative dissolution and uranium migration

Oxidative dissolution of uranium dioxide (UO(2)) and the subsequent migration of uranium in a subsurface environment and an underground waste disposal have been simulated with reactive transport models. In these systems, hydrogeological and chemical processes are closely entangled and their interdependency has been analyzed in detail, notably with respect to redox reactions, kinetics of mineralogical evolution and hydrodynamic migration of species of interest. Different codes, where among CASTEM, CHEMTRAP and HYTEC, have been used as an intercomparison and verification exercise. Although the agreement between codes is satisfactory, it is shown that the discretization method of the transport equation (i.e. finite elements (FE) versus mixed-hybrid FE and finite differences) and the sequential coupling scheme may lead to systematic discrepancies.     

Biological dehalogenation and halogenation reactions

A large number of halogenated compounds is produced by chemical synthesis. Some of these compounds are very toxic and cause enormous problems to human health and to the environment. Investigations on the degradation of halocompounds by microorganisms have led to the detection of various dehalogenating enzymes catalyzing the removal of halogen atoms under aerobic and anaerobic conditions involving different mechanisms. On the other hand, more than 3500 halocompounds are known to be produced biologically, some of them in great amounts. Until 1997, only haloperoxidases were thought to be responsible for incorporation of halogen atoms into organic compounds. However, recent investigations into the biosynthesis of halogenated metabolites by bacteria have shown that a novel type of halogenating enzymes, FADH(2)-dependent halogenases, are involved in biosyntheses of halogenated metabolites. In every gene cluster coding for the biosynthesis of a halogenated metabolite, isolated so far, one or several genes for FADH(2)-dependent halogenases have been identified.     

Hydrophobicity of complex organic mixtures

Hydrophobicity is an important property in risk assessment of chemicals. A group parameter that reflects the hydrophobicity of technical mixtures is not yet available. However, many substances are complex organic mixtures, for which it is practically impossible to determine each component separately. An experimental procedure to measure the hydrophobicity of organic mixtures without knowledge of the individual components was developed and tested for a mixture of benzene and twelve chlorobenzenes. This procedure is based on separation of the mixture into fractions of increasing hydrophobicity by reversed-phase HPLC, after which the total molar concentration in each fraction is determined by vapour pressure osmometry. The obtained information on hydrophobicity can be used for assessing bioaccumulation and sediment sorption after emission of the mixture to water has occurred.     

Influence of kinetic sorption and diffusion on pesticide movement through aggregated soils

Laboratory studies were carried out to investigate solute leaching at different times from application in relation to temperature and initial soil moisture. Aggregates of a heavy clay soil were treated with a non-interactive solute (bromide) and the herbicides chlorotoluron, isoproturon and triasulfuron. The soil was incubated at 90% field capacity and either 5 or 15 degrees C. The influence of application to initially dry and initially wet aggregates on the behaviour of isoproturon was also investigated. At intervals, samples were either leached in small columns, centrifuged to characterise the fraction of chemical available in pore water under natural moisture conditions or extracted with organic solvents to assess total residues in soil. Bromide concentrations in leachate and in pore water extracted by centrifugation were constant with time. In contrast, availability for leaching and concentration in pore water of the herbicides decreased with increasing time from application in soil incubated at 15 degrees C. The effect of residence time was much smaller at 5 than at 15 degrees C. At the higher temperature, pesticide concentrations in leachate and pore water declined faster than would be expected from degradation alone, probably due to slow diffusion of the pesticides into soil aggregates where they are less available for leaching and/or slow sorption-desorption. The faster decline in availability for leaching at 15 than at 5 degrees C was attributed to faster degradation of the readily available fraction. There was no significant influence of initial soil moisture on either the leaching behaviour of isoproturon or its availability in soil water.     

Comparison of the method of diffusive gels in thin films with conventional extraction techniques for evaluating zinc accumulation in plants and isopods

The measurement of diffusive gels in thin films (DGT) has recently been developed to assess metal bioavailability in soils. The DGT-method is based on diffusion in a porous matrix. To test the predictive capabilities of the method with regard to metal bioavailability, a study was set up with 28 soils having a variety of textures and amounts of zinc salts added. Correlation and regression analyses were performed to compare DGT-extracted zinc levels to zinc concentrations obtained by extraction with 0.01 M CaCl(2) and 0.43 M HNO(3), digestion with aqua regia and the zinc concentration in pore water. The amount of zinc extracted with CaCl(2) correlated well with DGT-extracted zinc levels in all soils spiked with different amounts of ZnCl(2). A similar correlation was not found for zinc concentrations in soil samples collected in the field. Experiments were performed to compare zinc content in organisms and in soils. The organisms tested were plants (grass, lettuce and lupine) and the hard bodied soil dwelling isopod Oniscus asellus. Good correlations were found between zinc accumulation in grass and lettuce and the C(E) (effective concentration) measured by a DGT-device, CaCl(2) extracted zinc and the zinc content in the pore water of all soils. The correlation with C(E) was not significant for lupine, neither for spiked soils, nor for field soils (p< or =0.001). Zinc levels in the isopods were not significantly related to any set of zinc measurements. From a synthesis of all results obtained it is concluded that the DGT-methodology does not have an additional value in predicting bioavailability of zinc in terrestrial ecosystems as compared to conventional extraction methods.     

Knowledge and utilization of edible mushrooms by local populations of the rain forest of south Cameroon

Indigenous knowledge of edible fungi and their utilization by local populations were investigated in southern Cameroon from 1996 to 1999. Some 100 participants from the major ethnic groups, comprising Bantu farmers and Bagyeli (Pygmy) hunter-gatherers, were interviewed. Mushroom usage by 30 families, (319 persons), was monitored daily for over a year. Mushroom knowledge among both groups was extensive. Over 50 vernacular names were provided by respondents. In Bantu households, women and children, and to some extent hunters, harvest mushrooms. In contrast, the whole Bagyeli household participates. Bantu harvest mushrooms preferentially in secondary forests while Bagyeli collect them predominantly in primary forests. Mushroom consumption is low for both groups, 1.1 and 1.4 kg of fresh mushrooms per person per year, respectively, a rate that is much lower than in central and eastern Africa. The apparent discrepancy between extensive mushroom knowledge and rather infrequent mushroom consumption probably relates to the social valuation of mushrooms.     

Assessment of the sustainability of technology by means of a thermodynamically based life cycle analysis

Life cycle analysis is one of the tools in the assessment of the sustainability of technological options. It takes into account all effects on the ecosystem and the population which may endanger the possibilities of current and future generations. However, the main bottleneck in current LCA methodologies is the balancing of different effects, being all quantified on different scales. In this work, a methodology is proposed, which allows one to quantify different effects of the production, consumption and disposal of goods, and services on a single scale. The basis of the methodology is the second law of thermodynamics. All production, consumption and disposal processes affecting the ecosystem and the population, are quantified in terms of loss of exergy. The exergy content of a material is the maximum amount of energy which can be transformed into work at given environmental conditions. Next to the elaboration of the methodology, the new approach is illustrated by examples of the production of synthetic organic polymers, inorganic building insulation materials and different waste gas treatment options.     

Distribution and dynamics of larval populations of Anopheles messeae and A. atroparvus in the delta of the rivers Rhine and Meuse,The Netherlands

The distribution and ecology of mosquitoes of the Anopheles maculipennis complex were studied in the delta of the rivers Rhine and Meuse in the southwest of The Netherlands. The study area was previously malarious, with A. atroparvus being the only vector. 125 potential aquatic habitats of A. maculipennis were sampled, of which 47 (37.6%) contained larvae of this species complex. Larval densities varied from 7.4-325.93 larvae m-2. There was no correlation between chlorinity (@1000) of the water and presence and/or density of larvae. The presence of A. maculipennis was not associated with one particular aquatic floristic habitat, although larvae were often found together with floating algae (Enteromorpha spp.). Larvae were not found in areas experiencing tidal flooding. A newly developed PCR method was used for identification of the mosquito sibling species. Of 150 larvae examined, only 4 were identified as A. atroparvus. All other larvae examined were A. messeae. Adult mosquitoes were identified as A. messeae and 30 wild-caught mosquitoes had fed on domestic animals. Because most anophelines found in 1999 were A. messeae, it is concluded that the study area has undergone a dramatic ecological change since the previous anopheline investigations in 1935, causing the near extinction of A. atroparvus. This species was the only malaria vector in The Netherlands and therefore it is not expected that malaria can return to its former endemic status in the coastal areas of The Netherlands.