Mycorrhizal fungal identity and diversity relaxes plant-plant competition

There is a great interest in ecology in understanding the role of soil microbial diversity for plant productivity and coexistence. Recent research has shown increases in species richness of mutualistic soil fungi, the arbuscular mycorrhizal fungi (AMF), to be related to increases in aboveground productivity of plant communities. However, the impact of AMF richness on plant-plant interactions has not been determined. Moreover, it is unknown whether species-rich AMF communities can act as insurance to maintain productivity in a fluctuating environment (e.g., upon changing soil conditions). We tested the impact of four different AMF taxa and of AMF diversity (no AMF, single AMF taxa, and all four together) on competitive interactions between the legume Trifolium pratense and the grass Lolium multiflorum grown under two different soil conditions of low and high sand content. We hypothesized that more diverse mutualistic interactions (e.g., when four AMF taxa are present) can ease competitive effects between plants, increase plant growth, and maintain plant productivity across different soil environments. We used quantitative PCR to verify that AMF taxa inoculated at the beginning of the experiment were still present at the end. The presence of AMF reduced the competitive inequality between the two plant species by reducing the growth suppression of the legume by the grass. High AMF richness enhanced the combined biomass production of the two plant species and the yield of the legume, particularly in the more productive soil with low sand content. In the less productive (high sand content) soil, the single most effective AMF had an equally beneficial effect on plant productivity as the mixture of four AMF. Since contributions of single AMF to plant productivity varied between both soils, higher AMF richness would be required to maintain plant productivity in heterogeneous environments. Overall this work shows that AMF diversity promotes plant productivity and that AMF diversity can act as insurance to sustain plant productivity under changing environmental conditions.     

Soil microbes drive the classic plant diversity-productivity pattern

Ecosystem productivity commonly increases asymptotically with plant species diversity, and determining the mechanisms responsible for this well-known pattern is essential to predict potential changes in ecosystem productivity with ongoing species loss. Previous studies attributed the asymptotic diversity-productivity pattern to plant competition and differential resource use (e.g., niche complementarity). Using an analytical model and a series of experiments, we demonstrate theoretically and empirically that host-specific soil microbes can be major determinants of the diversity-productivity relationship in grasslands. In the presence of soil microbes, plant disease decreased with increasing diversity, and productivity increased nearly 500%, primarily because of the strong effect of density-dependent disease on productivity at low diversity. Correspondingly, disease was higher in plants grown in conspecific-trained soils than heterospecific-trained soils (demonstrating host-specificity), and productivity increased and host-specific disease decreased with increasing community diversity, suggesting that disease was the primary cause of reduced productivity in species-poor treatments. In sterilized, microbe-free soils, the increase in productivity with increasing plant species number was markedly lower than the increase measured in the presence of soil microbes, suggesting that niche complementarity was a weaker determinant of the diversity-productivity relationship. Our results demonstrate that soil microbes play an integral role as determinants of the diversity-productivity relationship.     

Coral cavity sponges depend on reef-derived food resources: stable isotope and fatty acid constraints

The diet of cavity sponges on the narrow fringing reefs of Curaçao, Caribbean was studied. The origin and resources of the bulk food of these sponges, i.e., dissolved organic matter (DOM), were identified using stable carbon and nitrogen isotopes and fatty acid biomarkers. We found that phytoplankton and its derived DOM from the adjacent open sea and from reef overlying water is not the main source of food for most of the sponges examined nor is bacterioplankton. Interestingly, dual stable isotope signatures (δ¹³C_org, δ¹⁵N_org) and fatty acid biomarkers appoint coral mucus and organic matter derived from crustose coralline algae (CCA) as probable food sources for encrusting sponges. Mucus-derived DOM may contribute up to 66% to the diet of examined sponges based on results of dual isotope mixing model analysis. The contribution of CCA (as purported representative for benthic algae) was smaller with values up to 31%. Together, mucus- and CCA-derived substrates contributed for 48–73% to the diet of sponges. The presence of the exogenous fatty acid 20:4ω6 in sponges, which is abundant in coral mucus of Madracis mirabilis and in CCA, highlights these reef-derived resources as sources of nutrition for DOM feeding cavity sponges. The relatively high concentrations of exogenous 20:4ω6 in all sponges examined supports our hypothesis that the bulk of the food of the cavity sponge community is reef-derived. Our results imply that cavity sponges play an important role in conserving food and energy produced within the reef.     

Demography of <Emphasis Type="Italic">Halimeda incrassata</Emphasis> (Bryopsidales,Chlorophyta) in a Caribbean reef lagoon

The fate of 100 marked recruits of the rhizophytic alga Halimeda incrassata was followed in Puerto Morelos reef lagoon, Mexican Caribbean (20°52′N, 86°51′W), until death of the last individual from April 2005–2007. Juvenile mortality was relatively high (19%), the half-life of adult thalli was 13 months and maximal lifespan was 2 years. First age of sexual reproduction was 10 months, but only 6% of the marked thalli reproduced sexually. A subsequent static life-table approach (February–April 2008) at two sites indicated low spatial variation in transition probabilities between the life stages. Recruits were found throughout the year (density 2–11 thalli m⁻²) and were mostly of clonal origin. In a disturbed area, the density of sexual recruits was ~0.01 thalli m². Temporal fluctuations in population size depended on mortality rates, which increased slightly after hurricanes Emily (July 2005) and Wilma (October 2005), but might otherwise be regulated by density-dependent processes.     

Critical threshold size for overwintering sandeels (<Emphasis Type="Italic">Ammodytes marinus</Emphasis>)

Several ecologically and commercially important fish species spend the winter in a state of minimum feeding activity and at lower risk of predation. To enable this overwintering behaviour, energetic reserves are generated prior to winter to support winter metabolism. Maintenance metabolism in fish scales with body size and increases with temperature, and the two factors together determine a critical threshold size for passive overwintering below which the organism is unlikely to survive without feeding. This is because the energetic cost of metabolism exceeds maximum energy reserves. In the present study, we estimated the energetic cost of overwintering from a bioenergetic model. The model was parameterised using respirometry-based measurements of standard metabolic rate in buried A. tobianus (a close relative to A. marinus) at temperatures from 5.3 to 18.3°C and validated with two independent long-term overwintering experiments. Maximum attainable energy reserves were estimated from published data on A. marinus in the North Sea. The critical threshold size in terms of length (L _th) for A. marinus in the North Sea was estimated to be 9.5 cm. We then investigated two general predictions: (1) Fish smaller than L _th display winter feeding activity, and (2) size at maturation of iteroparous species is larger than L _th to ensure sufficient energy reserves to accommodate both the metabolic cost of passive overwintering and reproductive investments. Both predictions were found to be consistent with data on size at maturation and total body energy in December and February.     

Male genital length and mating status differentially affect mating behaviour in an earwig

Phenotypic variation in male genitalia may affect copulation behaviour, which can have important fitness consequences for males. Male genitalia commonly possess traits that increase male control over copulation, but in species where females control mating, a poor functional understanding often prevents insight into the processes responsible for such effects. Here, I investigate the effect of male genital length on copulation behaviour in the earwig Euborellia brunneri, where both sexes exhibit extremely elongated genitalia that correspond in shape. This model system is particularly suitable because pairs mate repeatedly and females can limit both the number and duration of copulations. I used both virgin and mated males and females in a double-mating design because longer male genitalia confer benefits in sperm competition. Consistent with a greater predicted male mating effort in mated females, the duration of individual copulations increased, but this traded off against mating frequency as cumulative mating duration remained unchanged. In contrast, male genital length increased both individual and cumulative mating duration, regardless of mating status. This difference suggests that, while males may modify copulation duration in response to mating status, females facultatively adjust mating frequency to prevent mating excessively or express preferences for increased male genital length. Notably, this study demonstrates that male genital phenotypes that are successful in sperm competition also enjoy female-mediated mating benefits.     

Modeling fecundity in birds: Conceptual overview, current models, and considerations for future developments

Fecundity is fundamental to the fitness, population dynamics, conservation, and management of birds. For all the efforts made to measure fecundity or its surrogates over the past century of avian research, it is still mismeasured, misrepresented, and misunderstood. Fundamentally, these problems arise because of partial observability of underlying processes such as renesting, multiple brooding, and temporary emigration. Over the last several decades, various analytical approaches have been developed to estimate fecundity from incomplete and biased data. These, include scalar arithmetic formulae, partial differential equations, individual-based simulations, and Markov chain methodology. In this paper, we: (1) identify component processes of avian reproduction; (2) review existing methods for modeling fecundity; (3) place these diverse models under a common conceptual framework; (4) describe the parameterization, validation, and limitations of such models; and (5) point out future considerations and challenges in the application of fecundity models. We hope this synthesis of existing literature will help direct researchers toward the most appropriate methods to assess avian reproductive success for answering questions in evolutionary ecology, natural history, population dynamics, reproductive toxicology, and management.     

Radiocarbon in food: a non-problem of health effects

Recently it has come to our attention that a paper was published in this journal entitled “recycling greenhouse gas fossil fuel emissions into low radiocarbon food products to reduce human genetic damage” (Williams in Environ Chem Lett 5:197–202, 2007). In this article, it is argued that food grown in a greenhouse is healthier for people, when the greenhouse is fertilised with CO₂ prepared from fossil fuels. In this comment, however, we argue that the effect on human health is completely negligible.     

Comparison of the SidePak personal monitor with the Aerosol Particle Sizer (APS)

The aim of this study was to compare the performance of the TSI Aerodynamic Particle Sizer (APS) and the TSI portable photometer SidePak to measure airborne oil mist particulate matter (PM) with aerodynamic diameters below 10 μm, 2.5 μm and 1 μm (PM(10), PM(2.5) and PM(1)). Three SidePaks each fitted with either a PM(10), PM(2.5) or a PM(1) impactor and an APS were run side by side in a controlled chamber. Oil mist from two different mineral oils and two different drilling fluid systems commonly used in offshore drilling technologies were generated using a nebulizer. Compared to the APS, the SidePaks overestimated the concentration of PM(10) and PM(2.5) by one order of magnitude and PM(1) concentrations by two orders of magnitude after exposure to oil mist for 3.3-6.5 min at concentrations ranging from 0.003 to 18.1 mg m(-3) for PM(10), 0.002 to 3.96 mg m(-3) for PM(2.5) and 0.001 to 0.418 mg m(-3) for PM(1) (as measured by the APS). In a second experiment a SidePak monitor previously exposed to oil mist overestimated PM(10) concentrations by 27% compared to measurements from another SidePak never exposed to oil mist. This could be a result of condensation of oil mist droplets in the optical system of the SidePak. The SidePak is a very useful instrument for personal monitoring in occupational hygiene due to its light weight and quiet pump. However, it may not be suitable for the measurement of particle concentrations from oil mist.     

An update of the Worldwide Integrated Assessment (WIA) on systemic insecticides. Part 3: alternatives to systemic insecticides

Environmental Science and Pollution Research - Over-reliance on pesticides for pest control is inflicting serious damage to the environmental services that underpin agricultural productivity. The...