Ecological impacts of early 21st century agricultural change in Europe – A review

The impacts of agricultural land use are far-reaching and extend to areas outside production. This paper provides an overview of the ecological status of agricultural systems across the European Union in the light of recent policy changes. It builds on the previous review of 2001 devoted to the impacts of agricultural intensification in Western Europe. The focus countries are the UK, The Netherlands, Boreal and Baltic countries, Portugal, Hungary and Romania, representing a geographical spread across Europe, but additional reference is made to other countries. Despite many adjustments to agricultural policy, intensification of production in some regions and concurrent abandonment in others remain the major threat to the ecology of agro-ecosystems impairing the state of soil, water and air and reducing biological diversity in agricultural landscapes. The impacts also extend to surrounding terrestrial and aquatic systems through water and aerial contamination and development of agricultural infrastructures (e.g. dams and irrigation channels). Improvements are also documented regionally, such as successful support of farmland species, and improved condition of watercourses and landscapes. This was attributed to agricultural policy targeted at the environment, improved environmental legislation, and new market opportunities. Research into ecosystem services associated with agriculture may provide further pressure to develop policy that is targeted at their continuous provisioning, fostering motivation of land managers to continue to protect and enhance them.     

Structure-biodegradation relationships of polymeric materials. 1. Effect of degree of oxidation on biodegradability of carbohydrate polymers

The biodegradability of oxidized starch and inulin has been studied in relation to the degree of periodate oxidation to dialdehyde derivatives, by measuring oxygen consumption and mineralization to carbon dioxide. A higher degree of oxidation of dialdehyde starch and dialdchyde inulin results in a lower rate at which the polymers are biodegraded. It is demonstrated that the biodegradation rate of dialdehyde inulin derivatives decreases more than that of equivalent starch derivatives. The differences in biodegradation behavior between dialdehyde starch and dialdehyde inulin, resulting from comparable modifications, are discussed in terms of conformational structure.     

Effects of Acidification and its Mitigation with Lime and Wood Ash on Forest Soil Processes: A Review

Anthropogenic acid deposition causes forest soil acidification and perturbation of the soil forming processes. The impact of soil acidification on tree growth is discussed in view of the role of mycorrhizal fungi in weathering and nutrient uptake. A review has been carried out of experiments involving treatments of forest soil by lime and wood ash, where soil properties and soil solution composition have been investigated. Results from these experiments in Europe and North America are summarized. In general, the content of C in the mor layer decreased as a result of treatment due to higher microbial activity and soil respiration as well as increased leakage of DOC. In addition, the content of N in the mor layer, in general, decreased after treatment and there are occasional peaks of high NO₃concentrations in soil solution. In nearly all reviewed investigations the pH of the deep mineral soil solution decreased and Al, SO₄and NO₃concentrations increased after treatment. These effects are probably due to the high ionic strength and increased microbial activity as a consequence of the treatments. In the soil, pH, CEC and base saturation increased in the upper horizons, but decreases in the upper mineral soil are also reported. In general, there was no increase in tree growth as a result of these treatments. The positive effects of the treatments on soil processes and tree growth are therefore questionable. In view of these conclusions, an investigation was carried out on the soil and soil solution chemistry and the role of mycorrhizal fungi in a spruce stand treated with two doses of lime and another treated with lime/ash in southern Sweden. The results of this investigation is reported in this volume.     

European scale application of atmospheric reactive nitrogen measurements in a low-cost approach to infer dry deposition fluxes

A European scale network was established in 2006 as part of the NitroEurope Integrated Project to infer reactive nitrogen (Nr) dry deposition fluxes, based on low-cost sampling of gaseous and aerosol species and inferential modelling. The network provides monthly measurements of NH₃, NH₄⁺, HNO₃ and NO₃⁻, as well as SO₂, SO₄²⁻, HCl, Cl⁻ and base cations at 58 sites. Measurements are made with an established low-cost denuder methodology (DELTA) as a basis to: (1) examine temporal trends and spatial patterns across Europe, (2) improve and calibrate inferential modelling techniques to estimate exchange of Nr species, (3) provide best estimates of atmospheric dry N deposition, and (4) permit an analysis of net GHG exchange in relation to atmospheric and agricultural N inputs at the European scale. Responsibility for measurements is shared among seven European laboratories. An inter-comparison of the DELTA implementation by 6 laboratories at 4 test sites (Montelibretti, Italy; Braunschweig, Germany; Paterna, Spain and Auchencorth, UK) from July to October 2006 provided training for the laboratories and showed that good agreement was achieved in different climatic conditions (87% of laboratory site-means within 20% of the inter-laboratory median). Results obtained from the first year of measurements show substantial spatial variability in atmospheric Nr concentrations, illustrating the major local (NH₃) and regional (HNO₃, NO₃⁻, and NH₄⁺) differences in Nr concentrations. These results provide the basis to develop future estimates of site-based Nr dry deposition fluxes across Europe, and highlight the role of NH₃, largely of agricultural origin, which was the largest single constituent and will dominate dry Nr fluxes at most sites.     

Persistent organochlorine compounds in soils and sediments of European high altitude mountain lakes

The composition of persistent organochlorine compounds (OC) in soils and sediments from two high altitude European mountain lakes, Redon in the Pyrenees and Ladove in the Tatra mountains, has been studied. Sediment cores from two additional lakes in the Tatra mountains, Starolesnianske Pleso and Dlugi Staw, have also been examined. DDTs (1.7-13 ng g(-1)) were the most abundant OC in soils followed by total polychlorobiphenyls (PCBs; 0.41-1.5 ng g(-1)) and hexachlorobenzene (HCB; 0.15-0.91 ng g(-1)). In sediments, the dominant OC were also DDTs (3.3-28 ng g(-1)) and PCBs (2.3-15 ng g(-1)). These concentrations are low, involving absence of major pollution sources in these high mountain regions. The downcore OC profiles in soils and sediments were similar but higher concentrations and steeper vertical gradients were observed in the latter. Radiometric determinations showed absence of significant OC transport from catchment to lake. The sediment-soil difference points therefore to a better retention of the OC load in sediments than soils which may be related to the low temperatures that are currently encountered at the bottom of the lake water column and the depletion of sediment bioturbation in these cold environments. Significant qualitative changes in the soil PCB distributions are observed downcore. These involve a dominance of the high molecular weight congeners in the top core sections and those of lower weight (i.e. less chlorinated) in the bottom. Anaerobic dechlorination of higher molecular weight congeners occurring in microsites, e.g. as observed in flooded or poorly drained soils, could be responsible for these changes. This process could be concurrent to bioturbation.     

Variability in environmental impacts of Brazilian soybean according to crop production and transport scenarios

Soybean production and its supply chain are highly dependent on inputs such as land, fertilizer, fuel, machines, pesticides and electricity. The expansion of this crop in Brazil in recent decades has generated concerns about its environmental impacts. To assess these impacts, two representative chains supplying soybeans to Europe were identified: Center West (CW) and Southern (SO) Brazil. Each supply chain was analyzed using Life Cycle Assessment methodology. We considered different levels of use of chemical and organic fertilizers, pesticides and machinery, different distances for transportation of inputs and different yield levels. Because transportation contributed strongly to environmental impacts, a detailed study was performed to identify the routes used to transport soybeans to seaports. Additionally, we considered different levels of land occupation and land transformation to represent the impact of deforestation in the CW region. Environmental impacts were calculated for 1000 kg of soybean up to and including the delivery to Europe at the seaport in Rotterdam, at 13% humidity. Overall results showed that the impacts are greater for CW than for SO for all impact categories studied, including acidification (7.7 and 5.3 kg SO₂ eq., respectively), climate change (959 and 510 kg CO₂ eq.), cumulative energy demand (12,634 and 6,999 MJ) and terrestrial ecotoxicity (4.9 and 3.1 kg 1,4-DCB eq.), except eutrophication and land occupation. The same trend was observed for the crop-production stage. Efforts to reduce chemical fertilizers and diesel consumption can reduce CO₂ emissions. Although deforestation for crop production has decreased in recent years, the contribution of deforestation to climate change and cumulative energy demand remains significant. In the CW scenario deforestation contributed 29% to climate change and 20% to cumulative energy demand. Results also showed that although there are different transportation options in Brazil, the current predominance of road transport causes severe environmental impacts. In CW, road transport contributed 19% to climate change and 24% to cumulative energy demand, while in SO it contributed 12% and 15% to these impacts, respectively. Improvements in the logistics of transportation, giving priority to rail and river transports over road transport, can contribute significantly to reducing greenhouse gas emissions and decreasing energy use. Future studies involving Brazilian soybeans should take into account the region of origin as different levels of environmental impact are predicted.     

An assessment of long term ecosystem research activities across European socio-ecological gradients

Integration of European long term ecosystem research (LTER) would provide important support for the management of the pan-European environment and ecosystems, as well as international policy commitments. This does require appropriate coverage of Europe and standardised frameworks and research methods between countries. Emerging interest in socio-ecological systems prompted the present assessment of the distribution of LTER activities across European socio-ecological gradients. This paper presents a European stratification with a 1 km² resolution, delineating 48 broad socio-ecological regions. The dataset is based on an existing biogeophysical stratification constructed using multivariate clustering of mainly climatic variables and a newly developed socio-economic stratification based on an economic density indicator. The coverage of European LTER facilities across the socio-ecological gradients is tested using this dataset. The analysis shows two strong biases in the present LTER effort. Firstly, urban and disturbed regions are consistently under-represented, illustrating a bias for traditional ecological research away from human activity. Secondly, the Mediterranean, for which some of the most extreme global change impacts are projected, is receiving comparatively little attention. Both findings can help guide future investment in the European LTER network – and especially in a Long Term Socio-Ecological Research (LTSER) component– to provide a more balanced coverage. This will provide better scientific understanding of pan-European environmental concerns and support the management of natural resources and international policy commitments in the European Union.     

Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.