Feasibility study of rainwater harvesting system in Sylhet City

In rural areas in Bangladesh, groundwater is the principal source of water supply. This underground water is available in considerable amount in shallow aquifers. It is free from pathogenic microorganisms and hence water-borne diseases. In plain lands, other than hilly areas, water supply to 97% rural population comes from tube-wells, which is regarded to be a phenomenal achievement in preserving public health. Besides, a dependable water supply system all throughout the country is offset by two factors: (a) high salinity in surface plus groundwater in coastal areas; (b) want of suitable groundwater aquifers in hilly areas and the high cost of setting up tube-wells due to deep underground water table and stony layers. However, presence of arsenic in underground water now poses a serious threat to the success once made in water supply by setting up of manually operated tube-wells in the village areas—the achievement is now on the brink of total collapse. In about 61 districts out of 64, presence of arsenic exceeds a quantity of 0.05 mg/1, a permissible limit as per Bangladeshi water quality standard. Harvesting rainwater can be a pragmatic solution to this problem, which is common in many places in Sylhet especially in the hilly areas on the north eastern part of the city. This can be an alternative source of drinking water because of availability of rainwater from March to October. Heavy rain occurs from end of May till mid September, which is commonly known as the rainy season. This paper focuses on the possibility of harvesting rainwater in rural communities and thickly populated urban areas of Sylhet. It also demonstrates the scopes of harvesting rainwater using simple and low-cost technology. With setting up of a carefully planned rainwater storage tank, a family can have all of its drinking water from rain. Planned use of rainwater through rainwater harvesting in the roof catchments may fulfill the entire annual domestic water demand of a family in the rural areas of Bangladesh.     

Large and mesoscale meteo-oceanographic patterns in local responses of biogeochemical concentrations

Investigations surrounding the variability of productivity in upwelling regions are necessary for a better understanding the physical-biological coupling in these regions by monitoring systems of environmental impacts according to the needs of the regional coastal management. Using a spatial and temporal database from National Centers for Environmental Prediction (NCEP) and National Center for Atmospheric (NCAR) Research reanalysis, Quick Scatterometer vector wind, and surface stations from the Southeast coast of Brazil, we investigate the meteorological influences due to the large-scale systems in the variability of the nutrient and larvae concentration, and chlorophyll a, describing statistically relationships between them in upwelling regions. In addition, we used multivariate analysis, such as PCA and clustering to verify spatial and temporal variances and describe more clear the structure and composition of the ecosystem. Correlation matrix analyses were applied for different water masses present in the study area to identify the relations between physical and biogeochemical parameters in a region, where frequently upwelling occur. Statistical approaches and seasonal variability show that the period of November to March is more sensitive to nutrients (1.20?mg/m(3) for chlorophyll a, 2.20?μmol/l for total nitrogen and 5.5?ml/l for DO) and larvae concentrations (120 org/m(3) for most of the larvae, except for cirripedia that presented values around 370 org/m(3)) relating to the influence of large and mesoescale meteorological patterns. The spatial and temporal variables analyzed with multivariate approach show meaningful seasonality variance of the physical and biological samples, characterizing the principal components responsible for this variance in spring and summer (upwelling period), emphasizing the monitoring of species as crustaceans and mussels that are present in the local economy. Then, the spring and summer season are characterized by high productivity due to the occurrence of upwelling in this period.     

Fast simultaneous determination of traces of Cu(II) and Co(II) in soils and sediments with the luminol/perborate chemiluminescent system

A flow injection analysis method based on ion chromatography and luminol chemiluminescence detection was used for the simultaneous determination of copper (II) and cobalt (II) trace levels in soils and sediments following microwave-assisted acid digestion. Detection was based on chemiluminescence (CL) of the luminol–perborate system in an alkaline medium, which is catalyzed by both transition metals. The concentration and pH of the eluent (oxalic acid) was found to affect CL intensities and retention times, both of which were inversely proportional to the oxalic acid concentration. The calibration curves for both metal ions were linear and allowed a limit of detection of 0.003 μg l^?1 for cobalt (II) and 0.014 μg l^?1 for cooper (II) to be calculated. The proposed method was successfully used to determine both metal ions in certified reference materials of stream and river sediments and soil samples. Based on the results, the determination is free of interferences from the usual concomitant ions.     

Biofilm thickness measurement using an ultrasound method in a liquid phase

In this report, the development of an online, noninvasive, measurement method of the biofilm thickness in a liquid phase is presented. The method is based in the analysis of the ultrasound wave pulse-echo behavior in a liquid phase reproducing the real reactor conditions. It does not imply the removal of the biomass from the support or any kind of intervention in the support (pipes) to detect and perform the measurements (non-invasiveness). The developed method allows for its sensor to be easily and quickly mounted and unmounted in any location along a pipe or reactor wall. Finally, this method is an important innovation because it allows the thickness measurement of a biofilm, in liquid phase conditions that can be used in monitoring programs, to help in scheduling cleaning actions to remove the unwanted biofilm, in several application areas, namely in potable water supply pipes.     

Dielectric properties of MSWI bottom ash for non-invasive monitoring of moisture

The dielectric procperties of MSWI bottom ash as a function of volumetric water content (VWC) are reported in this paper. The objective was to aid the development of microwave based non-invasive emission monitoring and control system for various bottom ash applications. The dielectric measurements were made, on a 1.5-year-old bottom ash, with an electrical network analyzer in microwave range (300 MHz–1.5 GHz). The VWC of the samples ranged between 0.05 and 0.40 m³?m^?3. The relationship between the dielectric permittivity and the VWC was modeled with an empirical model and a physically based Birchak model (BM). The results showed that a linear relationship existed between the permittivity and the VWC at higher water contents (>0.25 m³?m^?3). However, at lower water contents (<0.25 m³?m^?3), the relationship between the permittivity and the WVC was affected by the composition of the bottom ash. The permittivity measurement, with the current method, was not affected by high salt concentrations (10 and 20 dS/m). The empirical model, as compared to BM, provided the best fit between the actual and the predicted water content. The root mean square error (RMSE) values were 0.008–0.010 and 0.06–0.09 m³?m^?3 for the empirical and the Birchak model, respectively.     

Assessment of methane emission and oxidation at Air Hitam Landfill site cover soil in wet tropical climate

Methane (CH₄) emissions and oxidation were measured at the Air Hitam sanitary landfill in Malaysia and were modeled using the Intergovernmental Panel on Climate Change waste model to estimate the CH₄ generation rate constant, k. The emissions were measured at several locations using a fabricated static flux chamber. A combination of gas concentrations in soil profiles and surface CH₄ and carbon dioxide (CO₂) emissions at four monitoring locations were used to estimate the CH₄ oxidation capacity. The temporal variations in CH₄ and CO₂ emissions were also investigated in this study. Geospatial means using point kriging and inverse distance weight (IDW), as well as arithmetic and geometric means, were used to estimate total CH₄ emissions. The point kriging, IDW, and arithmetic means were almost identical and were two times higher than the geometric mean. The CH₄ emission geospatial means estimated using the kriging and IDW methods were 30.81 and 30.49 g m^?2 day^?1, respectively. The total CH₄ emissions from the studied area were 53.8 kg day^?1. The mean of the CH₄ oxidation capacity was 27.5 %. The estimated value of k is 0.138 year^?1. Special consideration must be given to the CH₄ oxidation in the wet tropical climate for enhancing CH₄ emission reduction.     

Biodegradation or simple adsorption to the support material? Development of a simple, fast and low-cost technique

Biofilms are present in several areas and are studied in microbiology, medical sciences, biology and, of course, sanitary engineering. Biofilms are used for the treatment of municipal wastewater, and their application was even before the invention of the activated sludge process. The main objective of this work was to develop a simple, fast and low-cost technique to evaluate the nature of the first decay in the concentration of an organic compound in the presence of a solid material. Though simple, the technique developed has allowed the clarification of whether the initial concentration decay is due to adsorption to the support material or a result of biodegradation. The results show that, with two different support materials, adsorption does not take place, and the biodegradation processes are responsible for the first decay in the organic concentration. The technique used offers a fast and low-cost way of studying the existence of adsorption. Two feed concentration solutions and two different support materials were used.     

Habitat monitoring and genotoxicity in Ucides cordatus (Crustacea: Ucididae), as tools to manage a mangrove reserve in southeastern Brazil

In Brazil, the state of São Paulo contains both preserved areas (Juréia-Itatins Ecological Station) and extremely impacted ones (Cubatão Municipality). This study evaluated the concentrations of five metals (Cu, Cd, Cr, Pb, and Hg) in two mangroves with different levels of anthropogenic impact and the apparent genotoxicity to Ucides cordatus. Water and sediment samples were obtained, and metal concentrations were determined with an atomic absorption spectrophotometer. The genotoxic impact was quantified based on the number of micronucleated cells per 1,000 analyzed (MN‰), using hemolymph slides stained with Giemsa. Metal concentrations in water were below the detection limit, except for lead, although no significant difference was observed between the areas (P?>?0.05). Sediment from Cubatão had higher concentrations of Cd, Pb, Cr, and Cu than sediment from Juréia-Itatins (P?<?0.05), but no significant differences in metal concentrations were detected among depth strata of the sediment (P?>?0.05). Crabs from Cubatão had a 2.6 times higher mean frequency of micronucleated cells (5.2?±?1.8 MN‰) than those from Juréia-Itatins (2.0?±?1.0 MN‰; P?<?0.0001). The more-polluted conditions found in the mangrove sediments of Cubatão were reflected in the micronucleus assay, demonstrating their genotoxic effect; however, genetic damage should be attributed to a synergistic effect with other kinds of pollutants previously recorded in different environments of Cubatão. U. cordatus proved to be an excellent bioindicator of mangrove pollution. This study established, for the first time, the normal frequency of MN‰ in a population of this species within an ecological station.     

Arsenic and other trace elements in two catfish species from Paranaguá Estuarine Complex, Paraná, Brazil

Concentrations of arsenic and four additional trace elements (Cu, Cr, Ni, and Zn) were determined by inductively coupled plasma–optical emission spectrometry in the muscular tissue of the yellow catfish (Cathorops spixii) and the urutu catfish (Genidens genidens) from Paranaguá Estuarine Complex, Brazil (PEC). The PEC can be characterized by an environment of high ecological and economic importance in which preserved areas of rainforest and mangroves coexist with urban activities as ports and industries. The average concentrations (in milligram per kilogram dry weight) of elements in the muscle tissue of C. spixii are as follows: Zn (31), As (17), Cu (1.17), Cr (0.62), and Ni (0.28). Similar concentrations could be found in G. genidens with exception of As: Zn (36), As (4.78), Cu (1.14), Cr (0.51), and Ni (0.14). Fish from the geographic northern rural region (Guaraqueçaba–Benito) display higher As concentrations in the muscle tissues than fish found in the south-western (urban) part of the PEC. An international comparison of muscle tissue concentrations of trace elements in fish was made. Except for Ni in C. spixii, a tendency of decrease in element concentration with increasing size (age) of the fish could be observed. According to the National Health Surveillance Agency of Brazil, levels of Cr and As exceeded the permissible limits for seafood. An estimation of the provisional tolerable weekly intake of As was calculated with 109 % for C. spixii and with 29 % for G. genidens.