VEGETATION INFLUENCE ON SMALL STREAM SILTATION1

ABSTRACT: A meandering stream channel was simulated in the Hydraulics Laboratory at Colorado State University and a series of tests was conducted using four types of vegetation to evaluate the potential effects of vegetation on sediment deposition and retention in a stream channel. The data collected included average flow velocity, flow depth, length of vegetation, density of vegetation, cross-sectional area of the vegetative stem, wetted perimeter of the vegetative stem, and injection and flushing time. The findings indicated that the vegetation could retain from 30 to 70 percent of the deposited sediments. The ability of vegetation to entrap and retain sediment is related to the length and cross-sectional area of the vegetation. The variables describing the flow and the vegetative properties were combined to form a predictive parameter, the sedimentation factor (S_d) that can be compared with the amount of sediment entrapped by vegetation in a stream system. A relation was developed correlating vegetation length to sediment retention after flushing for flexibility and rigid vegetation.     

DENSITY CURRENT INTRUSIONS IN AN ICE-COVERED URBAN LAKE1

ABSTRACT: Evidence is presented that snowmelt runoff from an urban watershed can produce density current intrusions (underflows) in a lake. Several episodes of density current intrusions are documented. Water temperatures and salinities measured near the bottom of a 10 m deep Minneapolis lake during the late winter warming periods in 1989, 1990, 1991, and 1995 show significant rapid changes which are correlated with observed higher air temperatures and snowmelt runoff. The snowmelt runoff entering this particular lake (Ryan Lake) has increased electrical conductivity, salinity, and density. The source of the salinity is the salt spread on urban streets in the winter. Heating of littoral waters in spring may also contribute to the occurrence of the sinking flows, but is clearly not the only cause.     

Incidents in manual handling activities

More than 20000 handling manoeuvres in loading or unloading trailers in a large transportation company were observed. The aim of the study was to determine the frequency and nature of the incidents occurring whilst handling. The incidents were recorded and interpreted from a double perspective, namely as risk factors and as activity regulation factors. The study showed that on average, one incident occurred in every seven handling manoeuvres: 71% of them were related to the environment, and 29% to the activity. While numerous, the environment-related incidents were generally without consequences. In this respect, the activity incidents appeared more risky; also, the majority of these incidents occurred during the load positioning phase. The study also showed that loads are re-handled twice as often in unloading as in loading, the frequency of re-handlings varying widely from one handler to another. The reasons why so few of the observed incidents are reported in accident studies and their significance in the understanding of handling problems are discussed.     

Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Concepts for sediment restoration on the palos verdes shelf,California

This article summarizes a study conducted by the U.S. Army Engineer Waterways Experiment Station to develop technical information and to evaluate the engineering feasibility of restoration alternatives for DDT-and PCB-contaminated sediments on the Palos Verdes shelf and slope near Los Angeles, California. The study evaluated the nonremoval alternative of in-place capping of contaminated sediments on the shelf and slope; removal of contaminated sediments using conventional and specialized dredging equipment and deep ocean mining equipment; treatment of contaminated sediments; and disposal of contaminated sediments in confined (diked) disposal facilities (CDFs), contained aquatic disposal (CAD) sites, upland landfills, and deep ocean basin sites. Cost estimates of the various alternatives were also prepared. This article concludes that restoration of the contaminated sediments is technically feasible. Sediments on the shelf and slope can be removed using available dredging technologies for deep water environments. In-place capping, CAD, and CDF alternatives are technically feasible. The deep ocean basin disposal alternative is not feasible from the technical or regulatory standpoint. The treatment alternative is not feasible from the implementability and economic standpoint.     

Focusing biodiversity research on the needs of decision makers

The project on Biodiversity Uncertainties and Research Needs (BURN) ensures the advancement of usable knowledge on biodiversity by obtaining input from decision makers on their priority information needs about biodiversity and then using this input to engage leading scientists in designing policy-relevant research. Decision makers articulated concerns related to four issues: significance of biodiversity; status and trends of biodiversity; management for biodiversity; and the linkage of social, cultural, economic, legal, and biological objectives. Leading natural and social scientists then identified the research required to address the decision makers' needs and determined the probability of success. The diverse group of experts reached consensus on several fundamental issues, helping to clarify the role of biodiversity in land and resource management. The BURN participants identified several features that should be incorporated into policy-relevant research plans and management strategies for biodiversity. Research and assessment efforts should be: multidisciplinary and integrative, participatory with stakeholder involvement, hierarchical (multiple scales), and problem- and region-specific. The activities should be focused regionally within a global perspective. Meta-analysis of existing data is needed on all fronts to assess the state of the science. More specifically, the scientists recommended six priority research areas that should be pursued to address the information needs articulated by decision makers: (1) characterization of biodiversity, (2) environmental valuation, (3) management for sustainability—for humans and the environment (adaptive management), (4) information management strategies, (5) governance and stewardship issues, and (6) communication and outreach. Broad recommendations were developed for each research area to provide direction for research planning and resource management strategies. The results will directly benefit those groups that require biodiversity research to address their needs—whether to develop policy, manage natural resources, or make other decisions affecting biodiversity.