Evaluating farm performance using agri-environmental indicators: recent experiences for nitrogen management in The Netherlands

Intensive agriculture, characterized by high inputs, has serious implications on the environment. Monitoring and evaluation of projects aiming at designing, testing and applying more sustainable practices require instruments to asses agronomic as well as environmental performance. Guidelines for Good Agricultural Practice (GAP) or Good Farming Practice (GFP) define sustainable practices but give limited insight into their environmental performance. Agri-environmental indicators (AEIs) provide information on environmental as well as agronomic performance, which allows them to serve as analytical instruments in research and provide thresholds for legislation purposes. Effective AEIs are quantifiable and scientifically sound, relevant, acceptable to target groups, easy to interpret and cost-effective. This paper discusses application of four AEIs for nitrogen (N) management in three Dutch research projects: 'De Marke', 'Cows and Opportunities' and 'Farming with a future'. 'De Marke' applied Nitrogen Surplus and Groundwater Nitrate Concentration in the design and testing of environmentally sound dairy systems. 'Cows and Opportunities', testing and disseminating dairy systems designed at 'De Marke', mainly applied Nitrogen Surplus, while 'Farming with a future' used Nitrogen Surplus, Groundwater Nitrate Concentration and Residual Mineral Soil Nitrogen to support arable farmers in complying with Dutch legislation (MINAS). Nitrogen Surplus is quantifiable, appealing and easy to interpret, but lacks scientific soundness or a good relationship with groundwater quality. Nitrogen Use Efficiency is sensitive to changes in management, while Residual Mineral Soil Nitrogen is appealing and cheap, but has difficulties in scaling. Groundwater Nitrate Concentration lacks clear rules for sampling, is labor consuming, expensive and mainly used in combination with other indicators. AEIs enhanced improvements in N management by facilitating (i) definition of project goals, (ii) design of desired systems, (iii) evaluation of applied systems and (iv) improving effective communication. AEI applications in other countries show a similar pattern as found in The Netherlands. Limitations to AEI application relate to inconsistencies between different indicators, heterogeneity of soil characteristics and linkages of N, carbon and water management. AEIs should be applied in an integrated evaluation, at a scale that reflects the farm's spatial variability. Simple AEIs like Nitrogen Surplus should be supported by other indicators and/or model calculations. The paper concludes that AEIs proved their value in design, implementation and testing of farming systems, but they should be used with care, always keeping in mind that indicators are simplifications of complex and variable processes.     

Bioconversion of selenate in methanogenic anaerobic granular sludge

The capacity of anaerobic granular sludge to remove selenate from contaminated wastewater was investigated. The potential of different types of granular sludge to remove selenate from the liquid phase was compared to that of suspended sludge and contaminated soil and sediment samples. The selenate removal rates ranged from 400 to 1500 microg g VSS(-1) h(-1), depending on the source of biomass, electron donor, and the initial selenate concentration. The granular structure protects the microorganisms when exposed to high selenate concentrations (0.1 to 1 mM). Anaerobic granular sludge "Eerbeek," originating from a UASB reactor treating paper mill wastewater, removed about 90, 50, and 36% of 0.1, 0.5, and 1 mM of Se, respectively, from the liquid phase when incubated with 20 mM lactate at 30 degrees C and pH 7.5. Selenite, elemental Se (Se(o)), and metal selenide precipitates were the conversion products. Enrichments from the anaerobic granular sludge "Eerbeek" were able to convert 90% of the 10-mM selenate to Se(o) at a rate of 1505 microg Se(VI) g cells(-1) h(-1), a specific growth rate of 0.0125 g cells h(-1), and a yield of 0.083 g cells mg Se(-1). Both microbial metabolic processes (e.g dissimilatory reduction) as well as microbially mediated physicochemical mechanisms (adsorption and precipitation) contribute to the removal of selenate from the Se-containing medium.     

Aerating grassland before manure application reduces runoff nutrient loads in a high rainfall environment

The effect of mechanically aerating grassland before liquid manure application in the fall on surface runoff and transport of nutrients and solids was studied in a high rainfall area. The two treatments were control and aeration, the latter receiving one pass with an aerator perpendicular to the slope before fall application of liquid manure (dairy in Years 1-3 and swine in Year 4). Treatments were randomly assigned on 3 to 5% sloping land with a silt loam surface soil (Aquic Dystroxerept) planted in orchardgrass (Dactylis glomerata L.). Runoff from natural rainfall events was sampled for nutrient and solids analysis. Aeration significantly reduced runoff and loads of suspended solids, total Kjeldahl N (TKN), and dissolved reactive P in all years. Annual runoff amounts were reduced by 47 to 81%, suspended and volatile solid loads by 48 to 69% and 42 to 83%, respectively, TKN loads by 56 to 81%, and total P (TP) loads by 25 to 75%. Loads of the soluble nutrient NH4-N, dissolved reactive P, and K were reduced by 41 to 83%. The first three runoff events after manure application accounted for approximately one-third of the annual total runoff and solid and nutrient loads when averaged across treatments, with loads of TKN, K, and NH4-N totaling 4.4, 3.3, and 1.9 kg ha-1, respectively. Aeration slightly increased downward movement of NO3-N, but not other nutrients in the soil. Thus mechanical aeration can be an effective tool for reducing runoff and loads of solids and nutrients after surface application of liquid manure on sloping grassland.     

Evaluation of simplifying assumptions on pesticide degradation in soil

There is evidence that degradation of pesticides in simple laboratory systems may differ from that in the field, but it is not clear which of the simplifications inherent in laboratory studies present serious shortcomings. Laboratory experiments evaluated several simplifying assumptions for a clay loam soil and contrasting pesticides. Degradation of cyanazine [2-(4-chloro-6-ethylamino-1,3,5-triazin-2-ylamino)-2-methylpropiononitrile] and bentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one 2,2-dioxide] at fluctuating temperature and moisture was predicted reasonably well based on parameters derived from degradation under constant conditions. There was a tendency for slower degradation of cyanazine and bentazone in soil aggregates of 3 to 5 mm in diameter (DT50 at 15 degrees C and 40% maximum water holding capacity of 25.1 and 58.2 d, where DT50 is the time for 50% decline of the initial pesticide concentration) than in soil sieved to <3 mm (DT50 of 19.1 and 37.6 d), but the differences were not significant for most datasets. Degradation of cyanazine, isoproturon [3-(4-isopropylphenyl)-1,1-dimethylurea], and chlorotoluron [3-(3-chloro-p-tolyl)-1,1-dimethylurea] was measured in soil amended with different amounts of lignin. The effect of lignin on degradation was small despite considerable differences in sorption. The DT50 values of cyanazine, isoproturon, and chlorotoluron were 16.2, 18.6, and 33.0 d, respectively, in soil without lignin and 19.0, 23.4, and 34.6 d, respectively, in soil amended with 2% lignin. Degradation of bentazone and cyanazine in repacked soil columns was similar under static and flow conditions with 50.1 and 47.2% of applied bentazone and 74.7 and 73.6% of applied cyanazine, respectively, degraded within 20 d of application. Thus, the assumptions underpinning laboratory to field extrapolation tested here were considered to hold for our experimental system. Additional work is required before general conclusions can be drawn.     

Quantifying the impact of regular cutting on vegetative buffer efficacy for nitrogen-15 sequestration

This study used the stable 15N isotope to quantitatively examine the effects of cutting on vegetative buffer uptake of NO3(-)-N based on the theory that regular cutting would increase N demand and sequestration by encouraging new plant growth. During the summer of 2002, 10 buffer plots were established within a flood-irrigated pasture. In 2003, 15N-labeled KNO3 was applied to the pasture area at a rate of 5 kg N ha(-1) and 99.7 atom % 15N. One-half of the buffer plots were trimmed monthly. In the buffers, the cutting effect was not significant in the first few weeks following 15N application, with both the cut and uncut buffers sequestering 15N. Over the irrigation season, however, cut buffers sequestered 2.3 times the 15N of uncut buffers, corresponding to an increase in aboveground biomass following cutting. Cutting and removing vegetation allowed the standing biomass to take advantage of soil 15N as it was released by microbial mineralization. In contrast, the uncut buffers showed very little change in 15N sequestration or biomass, suggesting senescence and a corresponding decrease in N demand. Overall, cutting significantly improved 15N attenuation from both surface and subsurface water. However, the effect was temporally related, and only became significant 21 to 42 d after 15N application. The dominant influence on runoff water quality from irrigated pasture remains irrigation rate, as reducing the rate by 75% relative to the typical rate resulted in a 50% decrease in total runoff losses and a sevenfold decrease in 15N concentration.     

The acetochlor registration partnership surface water monitoring program for four corn herbicides

A surface drinking water monitoring program for four corn (Zea mays L.) herbicides was conducted during 1995-2001. Stratified random sampling was used to select 175 community water systems (CWSs) within a 12-state area, with an emphasis on the most vulnerable sites, based on corn intensity and watershed size. Finished drinking water was monitored at all sites, and raw water was monitored at many sites using activated carbon, which was shown capable of removing herbicides and their degradates from drinking water. Samples were collected biweekly from mid-March through the end of August, and twice during the off-season. The analytical method had a detection limit of 0.05 microg L(-1) for alachlor [2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)-acetamide] and 0.03 microg L(-1) for acetochlor [2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)-acetamide], atrazine [6-chloro-N-ethyl-N'-(1-methylethyl)-1,3,5-triazine-2,4-diamine], and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)-acetamide]. Of the 16528 drinking water samples analyzed, acetochlor, alachlor, atrazine, and metolachlor were detected in 19, 7, 87, and 53% of the samples, respectively. During 1999-2001, samples were also analyzed for the presence of six major degradates of the chloroacetanilide herbicides, which were detected more frequently than their parent compounds, despite having higher detection limits of 0.1 to 0.2 microg L(-1). Overall detection frequencies were correlated with product use and environmental fate characteristics. Reservoirs were particularly vulnerable to atrazine, which exceeded its 3 microg L(-1) maximum contaminant level at 25 such sites during 1995-1999. Acetochlor annualized mean concentrations (AMCs) did not exceed its mitigation trigger (2 microg L(-1)) at any site, and comparisons of observed levels with standard measures of human and ecological hazards indicate that it poses no significant risk to human health or the environment.     

Approaches to assess biocover performance on landfills

Methane emissions from active or closed landfills can be reduced by means of methane oxidation enhanced in properly designed landfill covers, known as “biocovers”. Biocovers usually consist of a coarse gas distribution layer to balance gas fluxes placed beneath an appropriate substrate layer. The application of such covers implies use of measurement methods and evaluation approaches, both during the planning stage and throughout the operation of biocovers in order to demonstrate their efficiency. Principally, various techniques, commonly used to monitor landfill surface emissions, can be applied to control biocovers. However, particularly when using engineered materials such as compost substrates, biocovers often feature several altered, specific properties when compared to conventional covers, e.g., respect to gas permeability, physical parameters including water retention capacity and texture, and methane oxidation activity. Therefore, existing measuring methods should be carefully evaluated or even modified prior to application on biocovers. This paper discusses possible strategies to be applied in monitoring biocover functionality. On the basis of experiences derived from investigations and large-scale field trials with compost biocovers in Austria, an assessment approach has been developed. A conceptual draft for monitoring biocover performance and recommendations for practical application are presented.