Xeno-estrogenic compounds in precipitation

The exposure to some chemicals can lead to hormone disrupting effects. Presently, much attention is focused on so-called xeno-estrogens, synthetic compounds that interact with hormone receptors causing a number of reactions that eventually lead to effects related to reproduction and development. The current study was initiated to investigate the presence of a number of such compounds in precipitation as a follow-up on a previous study in which pesticide concentrations in air and precipitation were determined. Rainwater samples were collected at about 50 locations in The Netherlands in a four week period. The samples were analysed for bisphenol-A, alkylphenols and alkylphenol ethoxylates, phthalates, flame retardants and synthetic musk compounds. The results clearly indicated the presence of these compounds in precipitation. The concentrations ranged from the low ng l(-1) range for flame retardants to several thousands of ng l(-1) for the phthalates. Bisphenol-A was found in 30% of the samples in concentrations up to 130 ng l(-1), while alkylphenols and alkylphenol ethoxylates were found in virtually all locations in concentrations up to 920 ng l(-1) for the individual compounds. Phthalates were by far the most abundant xeno-estrogens in the precipitation samples and were found in every sample. Di-isodecyl phthalate was found in a surprisingly high concentration of almost 100 000 ng l(-1). Polybrominated flame retardants were found in the low ng l(-1) range and generally in less than 20% of the samples. Noticeable was the finding of hexabromocyclododecane, a replacement for the polybrominted diphenyl ethers at one location in a concentration of almost 2000 ng l(-1). Finally, as expected, synthetic musk compounds were detected in almost all samples. This is especially true for the polycyclic musks HHCB and AHTN. Nitro musks were found, but only on a few locations. Kriging techniques were used to calculate precipitation concentrations in between actual sampling locations to produce contour plots for a number of compounds. These plots clearly show located emission sources for a number of compounds such as bisphenol-A, nonylphenol ethoxylate, phthalates and AHTN. On the contrary, the results for HHCB and some phthalates indicated diffuse emission patterns, probably as the result of the use of consumer products containing these compounds.     

Response of phase II detoxification enzymes in Phragmites australis plants exposed to organochlorines

Mixed pollution is a characteristic of many industrial sites and constructed wetlands. Plants possessing an enzymatic detoxifying system that is able to handle xenobiotics seems to be a viable option for the removal of mixed persistent contaminants such organochlorines (OCs: monochlorobenzene (MCB), 1,4-dichlorobenzene (DCB), 1,2,4-trichlorobenzene (TCB), γ-hexachlorocyclohexane (HCH)). In this study, Phragmites australis plants were exposed to sub-lethal concentrations of OCs (7 days), in single-exposure (0.8 to 10 mg?l^?1) and in mixture of OCs (0.2 mg?l^?1 MCB?+?0.2 mg?l^?1 DCB?+?2.5 mg?l^?1 TCB?+?0.175 mg?l^?1 HCH). Studies were conducted on the detoxification phase II enzymes; glutathione S-transferases (GST), and glucosyltransferases (UGT). Measurements of GST and UGT activities revealed that OCs may be buffered by glutathione and glucose conjugation. There appeared to be a correlation between the effects on phase II enzymes and the degree of chlorination of the benzene ring with, for example, the greatest effects being obtained for HCH exposure. In the case of mixed pollution, the induction of some GST isoenzymes (CDNB, 35 % non-significant) and UGT (118 %) in leaves and the inhibition of phase II enzymes in the other organs were measured. UGTs appear to be key enzymes in the detoxification of OCs.     

Chemical and bioanalytical characterisation of PAHs in risk assessment of remediated PAH-contaminated soils

Polycyclic aromatic hydrocarbons (PAHs) are common contaminants in soil at former industrial areas; and in Sweden, some of the most contaminated sites are being remediated. Generic guideline values for soil use after so-called successful remediation actions of PAH-contaminated soil are based on the 16 EPA priority pollutants, which only constitute a small part of the complex cocktail of toxicants in many contaminated soils. The aim of the study was to elucidate if the actual toxicological risks of soil samples from successful remediation projects could be reflected by chemical determination of these PAHs. We compared chemical analysis (GC-MS) and bioassay analysis (H4IIE-luc) of a number of remediated PAH-contaminated soils. The H4IIE-luc bioassay is an aryl hydrocarbon (Ah) receptor-based assay that detects compounds that activate the Ah receptor, one important mechanism for PAH toxicity. Comparison of the results showed that the bioassay-determined toxicity in the remediated soil samples could only be explained to a minor extent by the concentrations of the 16 priority PAHs. The current risk assessment method for PAH-contaminated soil in use in Sweden along with other countries, based on chemical analysis of selected PAHs, is missing toxicologically relevant PAHs and other similar substances. It is therefore reasonable to include bioassays in risk assessment and in the classification of remediated PAH-contaminated soils. This could minimise environmental and human health risks and enable greater safety in subsequent reuse of remediated soils.     

Thermal and Catalytic Incinerators for the Control of VOCs

Abstract

The emission of Volatile Organic Compounds (VOCs) is attracting increasing concern both from the public and by government agencies. Among the many available control technologies for the treatment of VOC containing waste streams, incineration offers an ultimate disposal strategy rather than a means for collecting or concentrating the offending compounds. This paper describes the major, commercially available thermal and catalytic incinerator systems that are designed to treat dilute, VOC containing gas streams. Qualitative guidelines are presented whereby the technologies can be compared. In addition, an example waste stream is used to illustrate a simplified procedure for calculating the material and energy balances for each of the incinerators. The resulting parameters will be used in a companion paper to estimate the capital and operating costs associated with each design. In this manner, a first estimate can be obtained of the costs of cleaning a waste stream containing low levels of VOCs.     

Degradation of anti-inflammatory drug ketoprofen by electro-oxidation: comparison of electro-Fenton and anodic oxidation processes

The electrochemical degradation of the nonsteroidal anti-inflammatory drug ketoprofen in tap water has been studied using electro-Fenton (EF) and anodic oxidation (AO) processes with platinium (Pt) and boron-doped diamond (BDD) anodes and carbon felt cathode. Fast degradation of the parent drug molecule and its degradation intermediates leading to complete mineralization was achieved by BDD/carbon felt, Pt/carbon felt, and AO with BDD anode. The obtained results showed that oxidative degradation rate of ketoprofen and mineralization of its aqueous solution increased by increasing applied current. Degradation kinetics fitted well to a pseudo-first-order reaction. Absolute rate constant of the oxidation of ketoprofen by electrochemically generated hydroxyl radicals was determined to be (2.8?±?0.1)?×?10⁹ M^?1 s^?1 by using competition kinetic method. Several reaction intermediates such as 3-hydroxybenzoic acid, pyrogallol, catechol, benzophenone, benzoic acid, and hydroquinone were identified by high-performance liquid chromatography (HPLC) analyses. The formation, identification, and evolution of short-chain aliphatic carboxylic acids like formic, acetic, oxalic, glycolic, and glyoxylic acids were monitored with ion exclusion chromatography. Based on the identified aromatic/cyclic intermediates and carboxylic acids as end products before mineralization, a plausible mineralization pathway was proposed. The evolution of the toxicity during treatments was also monitored using Microtox method, showing a faster detoxification with higher applied current values.     

Vehicle routing for the eco-efficient collection of household plastic waste

Plastic waste is a special category of municipal solid waste. Plastic waste collection is featured with various alternatives of collection methods (curbside/drop-off) and separation methods (source-/post-separation). In the Netherlands, the collection routes of plastic waste are the same as those of other waste, although plastic is different than other waste in terms of volume to weight ratio. This paper aims for redesigning the collection routes and compares the collection options of plastic waste using eco-efficiency as performance indicator. Eco-efficiency concerns the trade-off between environmental impacts, social issues and costs. The collection problem is modeled as a vehicle routing problem. A tabu search heuristic is used to improve the routes. Collection alternatives are compared by a scenario study approach. Real distances between locations are calculated with MapPoint. The scenario study is conducted based on real case data of the Dutch municipality Wageningen. Scenarios are designed according to the collection alternatives with different assumptions in collection method, vehicle type, collection frequency and collection points, etc. Results show that the current collection routes can be improved in terms of eco-efficiency performance by using our method. The source-separation drop-off collection scenario has the best performance for plastic collection assuming householders take the waste to the drop-off points in a sustainable manner. The model also shows to be an efficient decision support tool to investigate the impacts of future changes such as alternative vehicle type and different response rates.     

Site-specific water quality guidelines: 1. Derivation approaches based on physicochemical, ecotoxicological and ecological data

Generic water quality guidelines (WQGs) are developed by countries/regions as broad scale tools to assist with the protection of aquatic ecosystems from the impacts of toxicants. However, since generic WQGs cannot adequately account for the many environmental factors that may affect toxicity at a particular site, site-specific WQGs are often needed, especially for high environmental value ecosystems. The Australian and New Zealand Guidelines for Fresh and Marine Water Quality provide comprehensive guidance on methods for refining or deriving WQGs for site-specific purposes. This paper describes three such methods for deriving site-specific WQGs, namely: (1) using local reference water quality data, (2) using biological effects data from laboratory-based toxicity testing, and (3) using biological effects data from field surveys. Two case studies related to the assessment of impacts arising from mining operations in northern Australia are used to illustrate the application of these methods. Finally, the potential of several emerging methods designed to assess thresholds of ecological change from field data for deriving site-specific WQGs is discussed. Ideally, multiple lines of evidence approaches, integrating both laboratory and field data, are recommended for deriving site-specific WQGs.     

Microbial contamination of drinking water in Pakistan—a review

Water pollution with pathogenic microorganisms is one of the serious threats to human health, particularly in developing countries. The main objective of this article is to highlight microbial contamination of drinking water, the major factors responsible for microbial contamination, and the resulting health problems in Pakistan. Furthermore, this study will be helpful for researchers and administrative agencies to initiate relevant studies and develop new policies to protect further deterioration of water supply with pathogenic microbes and ensure clean and safe drinking water to the public in Pakistan. In Pakistan, water at the source, in the distribution network, and at the consumer tap is heavily polluted with coliforms and fecal coliforms all over the country. An overview of more than 7,000 water samples reviewed here reveals that an average of over 71 and 58 % samples in the country was contaminated with total coliforms and fecal coliforms, respectively. Drinking water contamination accounts for 20 to 40 % of all diseases in the country, which causes national income losses of Rs 25–58 billion annually (US$0.25–0.58 billion, approximately 0.6–1.44 % of the country’s GDP). Improper disposal of industrial and municipal wastes is the most important factor responsible for water pollution in the country followed by cross-contamination due to old and leaking pipes and lack of water filtration and disinfection facilities. There is an urgent need for emergency steps to stop further deterioration of water quality and improve the existing water quality so as to protect the public from widespread waterborne diseases.