Superovulation fails to increase human blastocyst yield after uterine lavage

Uterine lavage affords the potential for non-invasive human blastocyst recovery, with obvious potential for preimplantation genetic diagnosis. In an effort to duplicate in women the multiple blastocyst recovery per cycle that can be achieved in several other species, we initiated a programme in which fertile women underwent superovulation, followed by lavage and embryo collection. We superovulated 15 fertile women, aged 21–40, in 29 cycles using one of four regimens. Insemination was by either intercourse or artificial intracervical donor insemination with cryopreserved sperm from men of proven fertility. In 28 of 29 cycles, the uterus was lavaged daily for 1, 2, or 3 days between 5 and 10 days after human chorionic gonadotropin (hCG) administration or luteinizing hormone (LH) surge. Almost total fluid volume was recovered in every lavage. There were no retained pregnancies and no complications. Surprisingly, only two morulae, one blastocyst, and four unfertilized ova were recovered. Thus, alterations in ovulation induction, insemination timing, or lavage techniques must be contemplated in order to increase the blastocyst yield and thus fulfil the potential of uterine lavage for preimplantation diagnosis.     

Early amniocentesis at 11–14 weeks' gestation for the diagnosis of fetal chromosomal abnormality—a clinical evaluation

Early arnniocentesis between 11 and 14 weeks' gestation was offered to 110 women at risk of a chromosomally abnormal fetus due to maternal age. Four were found to be unsuitable for the procedure, and 106 early amniocenteses were performed. In 102 cases, clear amniotic fluid was obtained with a single tap. There were two dry taps and two bloodstained tapis; sampling was repeated in three of these cases before 15 weeks. In the fourth case, placental biopsy was performed at 16 weeks. Thus, we were able to obtain a satisfactory sample in all but three cases(2.8 percent). Karyotyping of cells harvested from the early amniotic fluid samples was successful in all the 105 cases. Cell culture from the initial samples revealed a normal karyotype in 99 cases, two balanced translocations, two tetraploid karyotypes, and two cases of pseudomosaicism. Of the 105 pregnancies successfully sampled, there have been two losses to date (1–8 per cent). Two further patients presented with premature rupture of membranes, both pregnancies having successful outcomes. Sixty-two babies have delivered to date, with four congenital anomalies. There were no respiratory problems. Twenty-nine pregnancies are continuing without known complications, and details are not yet available on the remaining 12. The results indicate that early arnniocentesis may replace the traditional test at 15–17 weeks.     

Effects of population density and cadmium toxicity on growth and survival of blowflies

The blowfly Lucilia sericata has been reared on artificial diets containing from 0 to 200 mg Cd kg(-1) at population densities ranging from 8 larvae per 4-g diet to 8 larvae per 32-g diet. Peak larval weight, development period, pupal weight, adult-emergence weight, and fecundity were measured. Larvae of blowflies respond to food deprivation by a reduction in larval weight and subsequent pupal and adult size. Contaminating the food supply with cadmium produced similar additive effects, reduced the growth rate, and increased the age of pupation. The results are of importance in determining the effects of environmental pollutants on population dynamics.     

Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Nitrous Oxide in Agricultural Drainage Waters Following Field Fertilisation

Dissolved nitrous oxide (N₂O), nitrate (NO₃ ^-), and ammonium (NH₄ ⁺) concentrations in an agricultural field drain were intensively measured over the period of field nitrogen (N) fertilisation and for several weeks thereafter. Supersaturations of dissolved N₂O were observed in field drain waters throughout the study. On entry to an open drainage ditch, concentrations of dissolved N₂O rapidly decreased and a total N₂O-N emission via this pathway of 13.2 g over the period of study (45 days) was calculated. This compared with a predicted emission of the order of 300 g, based on measured losses of NO₃ ^- and NH₄ ⁺ in the field drainage water, and the default IPCC emission factor of 0.01 kg N₂O-N per kg Nentering rivers and estuaries. In contrast to widespread evidence of a clear relationship between the amount of N applied to agricultural land and subsequent direct N₂O emission from the soil surface, the relationship between the amount of N₂O in soil drainage waters and the amount of N applied was poor. We conclude that the complexity, both spatially and temporally, of the processes ultimately responsible for the amount of N₂O in agricultural drainage waters make a straightforward relationship between N₂O concentration and N application rate unlikely in all but the simplest of systems.     

Sustainable land application: an overview

Man has land-applied societal nonhazardous wastes for centuries as a means of disposal and to improve the soil via the recycling of nutrients and the addition of organic matter. Nonhazardous wastes include a vast array of materials, including manures, biosolids, composts, wastewater effluents, food-processing wastes, industrial by-products; these are collectively referred to herein as residuals. Because of economic restraints and environmental concerns about land-filling and incineration, interest in land application continues to grow. A major lesson that has been learned, however, is that the traditional definition of land application that emphasizes applying residuals to land in a manner that protects human and animal health, safeguards soil and water resources, and maintains long-term ecosystem quality is incomplete unless the earning of public trust in the practices is included. This overview provides an introduction to a subset of papers and posters presented at the conference, "Sustainable Land Application," held in Orlando, FL, in January 2004. The USEPA, USDA, and multiple national and state organizations with interest in, and/or responsibilities for, ensuring the sustainability of the practice sponsored the conference. The overriding conference objectives were to highlight significant developments in land treatment theory and practice, and to identify future research needs to address critical gaps in the knowledge base that must be addressed to ensure sustainable land application of residuals.     

Ozonation of oil sands process water removes naphthenic acids and toxicity

Naphthenic acids are naturally-occurring, aliphatic or alicyclic carboxylic acids found in petroleum. Water used to extract bitumen from the Athabasca oil sands becomes toxic to various organisms due to the presence of naphthenic acids released from the bitumen. Natural biodegradation was expected to be the most cost-effective method for reducing the toxicity of the oil sands process water (OSPW). However, naphthenic acids are poorly biodegraded in the holding ponds located on properties leased by the oil sands companies. In the present study, chemical oxidation using ozone was investigated as an option for mitigation of this toxicity. Ozonation of sediment-free OSPW was conducted using proprietary technology manufactured by Seair Diffusion Systems Inc. Ozonation for 50min generated a non-toxic effluent (based on the Microtox bioassay) and decreased the naphthenic acids concentration by approximately 70%. After 130min of ozonation, the residual naphthenic acids concentration was 2mgl(-1): <5% of the initial concentration in the filtered OSPW. Total organic carbon did not change with 130min of ozonation, whereas chemical oxygen demand decreased by approximately 50% and 5-d biochemical oxygen demand increased from an initial value of 2mgl(-1) to a final value of 15mgl(-1). GC-MS analysis showed that ozonation resulted in an overall decrease in the proportion of high molecular weight naphthenic acids (n> or = 22).     

Preparation and evaluation of candidate certified reference materials (CRMs) for nutrients in seawater

Certified reference materials (CRMs) are an essential part of the quality assurance (QA) necessary for the reliable analytical measurement of nutrients in seawater. The CRMs currently available for these analyses are not matrix matched to marine samples. QUASIMEME routinely produces test materials for the nutrients in seawater and nutrients in estuarine water and low-salinity open water Laboratory Performance Studies (LPS) that are both homogeneous and stable. QUASIMEME, in conjunction with Eurofins Scientific, Denmark have produced two reference materials (RMs). The homogeneity testing and preliminary stability studies were carried out by QUASIMEME, and the results are presented in this article. Participants of the QUASIMEME LPS who demonstrated satisfactory long-term performance for the analysis of nutrients in seawater and nutrients in estuarine water and low-salinity open water were invited to take part in the certification exercise. Twenty laboratories returned data, a summary of which is also presented. The certification and long-term stability testing and additional data analysis were carried out by Eurofins Scientific, Denmark, and are outwith the scope of this article and not reported here. Eurofins Scientific, Denmark have marketed these RMs as part of their range of VKI Reference Materials (further information is available from eurofins@eurofins.dk).     

Effects of marine biofouling on gas sensor membrane materials

The use of underwater gaseous sensors has increased rapidly in the last 10 years. The majority of such sensors employ a thin membrane through which the gas diffuses. These sensors are potentiometric gas-sensing probes and essentially they are ion-selective electrodes. The deployment time of these membranes is curtailed by the formation of biofouling on the membrane leading to erroneous results. The physical properties of a variety of commonly used membranes were investigated using SEM and AFM. This showed that there were differences in topography between the PTFE membranes, such as pore sizes and surface roughness, which may be attributed to the manner in which they are manufactured. The pore size of the PTFE membranes varied greatly, ranging from circular pores with a diameter of 500 nm to elongated pores measuring 1 x 22 microm. The contact angle of each membrane showed that they were all hydrophobic. The amount of fouling on each was also observed and its affect on oxygen diffusion was monitored. Fouling slowed down the response of the instrument and caused reduced diffusion through the membranes. The amount of fouling varied between the membranes with the YSI membrane fouling least. Some of the membranes tested did foul less than others and there could be lifetime advantages of choosing a membrane with a smoother surface and a small pore size.