Mineral contents of the head, caudal, central fleshy part, and spinal columns of some fishes

In the experiment, mineral contents of the head, caudal, central fleshy part, and spinal columns of fishes were determined by inductively coupled plasma atomic emission spectrometry. The Ca content of base fleshy part ranged from 1,682 to 5,505 mg/kg. The Ca contents of central fleshy part were found between 104 and 428 mg/kg. This value was found between 5,582 and 7,368 in the spinal column parts. The K content in general ranged from 2,411 (Carassius gibellio) and 4,419 mg/kg (Scomber scombrus). The highest potassium was found on the central fleshy part and ranged between 3,214 and 4,419. The P content was found mostly on the bones and it range between 28,833 and 34,726. The least phosphor amount was found on the central fleshy part. While the Cd content ranges between 0.019 ppm and 0.104 mg/kg, Cr content changed between 1.32 and 4.20 ppm.     

Relative Phytoplankton growth responses to physically and chemically dispersed South Louisiana sweet crude oil

We conducted controlled laboratory exposure experiments to assess the toxic effects of water-accommodated fractions (WAFs) of South Louisiana sweet crude oil on five phytoplankton species isolated from the Gulf of Mexico. Experiments were conducted with individual and combinations of the five phytoplankton species to determine growth inhibitions to eight total petroleum hydrocarbon (TPH) equivalent concentrations ranging from 461 to 7,205 ppb. The composition and concentration of crude oil were altered by physical and chemical processes and used to help evaluate crude oil toxicity. The impact of crude oil exposure on phytoplankton growth varied with the concentration of crude oil, species of microalgae, and their community composition. At a concentration of TPH <?1,200 ppb, dinoflagellate species showed significantly better tolerance, while diatom species showed a higher tolerance to crude oil at higher concentrations of TPH. For both groups, the larger species were more tolerant to crude oil than smaller ones. The toxicity potential of crude oil seems to be strongly influenced by the concentration of polycyclic aromatic hydrocarbons (PAHs). The addition of the dispersant, Corexit® EC9500A, increased the amount of crude oil up to 50-fold in the water column, while the physical enhancement (vigorous mixing of water column) did not significantly increase the amount of TPH concentration in the water column. The species response to crude oil was also examined in the five-species community. Each phytoplankton species showed considerably less tolerance to crude oil in the five-species community compared to their individual responses. This study provides baseline information about individual phytoplankton responses to crude oil and dispersed crude oil for subsequent research efforts seeking to understand the impacts of oil on the phytoplankton in the bigger picture.     

Determination of heavy metal contents in some freshwater fishes

The concentrations of heavy metals in tench, pike-perch, and common carp fish caught in four different seasons from Damsa dam lake (Nev?ehir) were determined. Heavy metal contents of fishes changed depending on seasons. The highest Al (20.894 mg/kg) in tench was established in winter, and the lowest Al (1.605 mg/kg) was determined in summer. Fe content of tench fish changed between 112.906 mg/kg (autumn) and 31.207 mg/kg (spring). In addition, Zn contents of tench were found between 36.0323 mg/kg (summer) and 430.586 mg/kg (winter). The results indicate that concentrations of Cu of tench varied from 0.1934 mg/kg (winter) to 15.422 mg/kg (autumn). Results indicate that concentrations varied from 2.923 mg/kg (autumn) to 32.078 mg/kg (summer) with a mean of 11.1893 mg/kg for Al; 0.2483 mg/kg (spring) to 3.3088 mg/kg (autumn) with a mean of 1.6189 mg/kg for Ni; 0.5325 mg/kg (spring) to 0.845 mg/kg (autumn) with a mean of 0.7234 for Pb; and 7.0464 mg/kg (winter) to 253.686 mg/kg (summer) with a mean of 133.6348 for Zn. In common carp, Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Se, Ga, and Te contents were determined as 3.9623 mg/kg; 0.1293, 0.2336, 0.0526, 0.1543, 4.2406, 0.726, 1.797, 0.6216, 6.8536, 0.1783, 0.7876, and 0.371 mg/kg in autumn, respectively.     

The role of bacterial consortium and organic amendment in Cu and Fe isotope fractionation in plants on a polluted mine site

Copper and iron isotope fractionation by plant uptake and translocation is a matter of current research. As a way to apply the use of Cu and Fe stable isotopes in the phytoremediation of contaminated sites, the effects of organic amendment and microbial addition in a mine-spoiled soil seeded with Helianthus annuus in pot experiments and field trials were studied. Results show that the addition of a microbial consortium of ten bacterial strains has an influence on Cu and Fe isotope fractionation by the uptake and translocation in pot experiments, with an increase in average of 0.99?‰ for the δ⁶⁵Cu values from soil to roots. In the field trial, the amendment with the addition of bacteria and mycorrhiza as single and double inoculation enriches the leaves in ⁶⁵Cu compared to the soil. As a result of the same trial, the δ⁵⁶Fe values in the leaves are lower than those from the bulk soil, although some differences are seen according to the amendment used. Siderophores, possibly released by the bacterial consortium, can be responsible for this change in the Cu and Fe fractionation. The overall isotopic fractionation trend for Cu and Fe does not vary for pot and field experiments with or without bacteria. However, variations in specific metabolic pathways related to metal–organic complexation and weathering can modify particular isotopic signatures.     

Kinetics of aerobic and anaerobic biomineralization of atrazine in surface and subsurface agricultural soils in Ohio

The purpose of this study was to assess atrazine mineralization in surface and subsurface samples retrieved from vertical cores of agricultural soils from two farm sites in Ohio. The Defiance site (NW-Ohio) was on soybean-corn rotation and Piketon (S-Ohio) was on continuous corn cultivation. Both sites had a history of atrazine application for at least a couple of decades. The clay fraction increased at the Defiance site and the organic matter and total N content decreased with depth at both sites. Mineralization of atrazine was assessed by measurement of ¹⁴CO₂ during incubation of soil samples with [U-ring-¹⁴C]-atrazine. Abiotic mineralization was negligible in all soil samples. Aerobic mineralization rate constants declined and the corresponding half-lives increased with depth at the Defiance site. Anaerobic mineralization (supplemented with nitrate) was mostly below the detection at the Defiance site. In Piketon samples, the kinetic parameters of aerobic and anaerobic biomineralization of atrazine displayed considerable scatter among replicate cores and duplicate biometers. In general, this study concludes that data especially for anaerobic biomineralization of atrazine can be more variable as compared to aerobic conditions and cannot be extrapolated from one agricultural site to another.     

Duo-molecularly imprinted polymer-coated magnetic particles for class-selective removal of endocrine-disrupting compounds from aqueous environment

The removal of steroid and phenolic endocrine-disrupting compounds (EDCs) from an aqueous environment was investigated using magnetic particles encapsulated by a duo-molecularly imprinted polymer (duo-MIP). The effect of environmental variables on the binding efficiency was studied. Experimental results showed that the amount of EDCs adsorbed was neither affected by up to 10.0 mM NaCl nor significantly interfered by up to 10.0 mg/L humic acid. Negligible influence was observed from pH 3.3 to pH 6.8, but a decrease started at pH 9. Freundlich isotherm parameters indicated binding capacities in the order of DES?>?E2?～?E1?>?BPA. The applicability of class-selective removal was verified using river water samples spiked with these EDCs at 10 μg/L; the binding efficiencies were 90, 90, 88, and 98 % for estrone (E1), 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES), respectively. A reuse investigation verified constant binding capacities exhibiting <2 % reduction after seven cycles of regeneration.     

Synthesis of Ion-Imprinted Alginate Based Beads: Selective Adsorption Behavior of Nickel (II) Ions

Ni(II) imprinted and non-imprinted bioadsorbent alginate beads were prepared, and utilized in the selective adsorption of Ni(II) ions. The optimum adsorption capacity were 6.00 mmol g^?1 at 500 ppm initial metal ion concentration at pH 7 for Ni(II) imprinted alginate beads (IIP). The equilibrium data were applied to Langmuir and Freundlich adsorption isotherms, and it fitted both isotherm models. Thermodynamic parameters showed favorable and endothermic nature of adsorption. Ni(II) imprinted bead showed the strong ability to selective adsorption from Cu(II), Co(II) and Zn(II) ions. In conclusion, Ni(II) ion imprinted alginate beads could be used repeatedly without any significant reduce of adsorption capacity.     

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation

In this study, PM₁₀ concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM₁₀ concentration measured in the winter season was 86.4 and 27.3 μg/m³, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 μg/m³ in the summer season. According to the results, it was observed that the PM₁₀ levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.     

Determination of Cadmium and Copper in Fish Samples from Sir And Menzelet Dam Lake Kahramanmaraş, Turkey

The cadmium and copper levels were determined in the total of 126 fish samples which belongs to five fish species collected from Sır and Menzelet Dam Lakes in Kahramanmaraş Province by Atomic Absorption Spectrophotometer. The concentrations of heavy metals were expressed as ppm wet weight of tissue. The mean levels of cadmium and copper in muscle, liver and gill tissues of Cyprinus carpiofrom the Menzelet Dam were found as 0.27, 0.91, 1.49 and 0.94, 1.2, 1.05, respectively. The mean levels of Cd in the muscle tissues of Leuciscus cephalusfrom the Menzelet Dam were found 0.32 ppm, Cd wasn't found in tissues of liver and gill. The mean levels of Cu in the muscle, liver and gill tissues were found as 3.17 ppm, 1.19 ppm, 0.96 ppm, respectively. The mean levels of the Cd and Cu in muscle and gill tissues of Acanthobrama marmid from the Sır Dam were found as 1.28, 2.64 and 0.72, 0.08, respectively. The levels of the Cd and Cu in muscle tissues of Cyprinus carpiofrom the Sır Dam were found 0.87 and 0.02 ppm, respectively. The mean levels of the Cd and Cu in the muscle and gill tissues of Chondrostoma regium from the Sır Dam were found to be 0.80, 2.62 and 0.67, 1.34 ppm, respectively. The mean levels of the Cd in the muscle tissues of the Silurus glanis was found as 0.60 ppm. In the muscle of the Silurus glanis from the Sır Dam, Cu was not found. The Sır Dam is more polluted than the Menzelet Dam from the point of Cd but less polluted than the Menzelet Dam From the point of Cu. A relationship was determined between species and their habitating region in terms of the levels reflected metal residues. In this study it was emphasized that the amounts of Cd and Cu in the samples were low, however, seas, lakes, rivers, soil, air and consumed foods etc. has to be controlled routinely.     

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.