Temporal analysis of coastal erosion in Turkey: a case study Karasu coastal region

Coastal erosion may be caused by natural causes as well as human factors. Karasu town of the city of Sakarya in Turkey which is a touristic region on the Black Sea coast has been experienced a drastic coastal erosion. In recent years, this erosion reached the threatening dimensions for the structures in the settlement. According to the temporal analyses of Landsat satellite images, the maximum erosion on the coastline was detected 100 m between 1987–2013. The results of the study show that the harbour construct on the Karasu coast has the major impact on this event. The secondary factor is that the amount of the sediment carried by the Sakarya River was decreased in time due to different reasons. To prevent the coastal erosion, a series of offshore breakwaters were planned after the failed application of groins on the coastline. In this study, temporal changes of the coastline are investigated by the Landsat satellite data and land surveys, possible reasons of the erosion are discussed and the solutions are proposed regarding the coastal structures.     

Valorization of leather industry waste in polyurethane composites for reduced flammability

Journal of Material Cycles and Waste Management - Industrial wastes are considered a major cause of environmental pollution, and studies on valorizing these wastes and converting them into...     

Encouraging sustainable clothing disposal: consumers’ social recycling motivations in Turkey

Journal of Material Cycles and Waste Management - Nowadays, textile waste arising from increasing clothing production, consumption, and disposal activities has led to environmental, social, and...     

Size distribution and seasonal variation of airborne particulate matter in five areas in Istanbul,Turkey

Goal, scope, and background  

Many studies have focused on measuring fine and course particulate matter (PM) in urban and rural sites around the world. The aim of this research is to gain information on the size distribution of particles. The physical characteristics of PM in the urban air of Istanbul were determined.     

The Effect of Acetylation on the Hydrolytic Degradation of PLA/Clay Nanocomposites

In this study, the hydrolytic degradation of Poly(lactic acid) (PLA) and acetylated PLA (PLA-Ac)–clay nanocomposites were investigated. The organo clay was obtained by ion exchange reaction using cetyl tri methyl ammonium bromide (CTAB). Nanocomposites containing 2, 5 and 8% mass ratio of organo clay (CTAB-O) were prepared. PLA and its organo clay nanocomposites were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and X-ray diffraction (XRD) to determine the morphology before and after hydrolytic degradation. Fourier transform infrared (FTIR) analyses of PLA and PLA-Ac were also obtained. The hydrolytic degradation of polymers and their composites were investigated in the phosphate buffered saline solution (PBS). The results showed that controlled hydrolytic degradation was observed in the samples with end group modification of PLA. While weight loss of PLA films was 28%, that of PLA-Ac films was 18% after 60 days degradation time. The weight loss was obtained as 29.5 and 25.5% for PLA-5 wt% organo clay (PLA/5CTAB-O) and PLA-Ac-5 wt% organo clay (PLA-Ac/5CTAB-O) nanocomposites films, respectively. It was also observed that thermal degradation of PLA-Ac was much more than that of PLA. Hydrolytic degradation increased depending on organo clay content. The end group modificated PLA results in controlled hydrolytic degradation. While hydrolytic degradation in polymer films occurred as surface erosion, bulk erosion was observed in composite films.     

Distribution and accumulation of heavy metals in the sediments of Akkaya Dam,Nigde, Turkey

Twenty-one surface sediment samples were collected from Akkaya Dam. Heavy metal concentrations (Mo, Cu, Pb, Zn, Ni, Co, Mn, Fe, Cr, As, V and Cd), grain size, organic carbon and carbonate contents were studied in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of dam. The sediments in the study area are mostly very fine sands. However, mud was observed in the northeast of the dam. Sediment pollution assessment was carried out using enrichment factor. The calculation of enrichment factors showed that Mo is depleted by 1.0 whereas Cu, Pb, Zn, Ni, Co, Mn, As, V, Cr and Cd are enriched by 3, 5.4, 7, 2.7, 2.2, 3.4, 42.3, 2.1, 1.8 and 7.2, respectively. Relatively high concentrations heavy metals occurred in north (textile industry area) and east (Karasu River) due to enrichment controlled by anthropogenic wastes. The results of correlation analysis show low–medium positive and negative correlations among metals, grain size, carbonate contents and organic carbon and indicate that heavy metals in sediments of the Akkaya Dam have different anthropogenic sources.     

Integrated approach of environmental impact and risk assessment of Rosia Montana Mining Area, Romania

The environmental impact assessment of mining sites represents nowadays a large interest topic in Romania. Historical pollution in the Rosia Montana mining area of Romania caused extensive damage to environmental media. This paper has two goals: to investigate the environmental pollution induced by mining activities in the Rosia Montana area and to quantify the environmental impacts and associated risks by means of an integrated approach. Thus, a new method was developed and applied for quantifying the impact of mining activities, taking account of the quality of environmental media in the mining area, and used as case study in the present paper. The associated risks are a function of the environmental impacts and the probability of their occurrence. The results show that the environmental impacts and quantified risks, based on quality indicators to characterize the environmental quality, are of a higher order, and thus measures for pollution remediation and control need to be considered in the investigated area. The conclusion drawn is that an integrated approach for the assessment of environmental impact and associated risks is a valuable and more objective method, and is an important tool that can be applied in the decision-making process for national authorities in the prioritization of emergency action.     

Assessment of particulate matter in the urban atmosphere: size distribution, metal composition and source characterization using principal component analysis

In this study, the size distribution of airborne particles and related heavy metals Co, Cd, Sn, Cu, Ni, Cr, Pb and V in two urban areas in Istanbul: Yenibosna and Goztepe, were examined. The different inhalable particles were collected by using a cascade impactor in eight size fractions (<0.4 μm, 0.4-0.7 μm, 1.1-2.1 μm, 2.1-3.3 μm, 3.3-4.7 μm, 4.7-5.8 μm, 5.8-9 μm and >9 μm) for six months at each station. Samples were collected on glass fiber filters and filters were extracted and analyzed using ICP-MS. Log-normal distributions showed that the particles collected at the Yenibosna site have a smaller size compared to the Goztepe samples and the size distribution of PM was represented the best by the tri-modal. The average total particle concentrations and standard deviations were obtained as 67.7 ± 17.0 μg m(-3) and 82.1 ± 21.2 μg m(-3), at the Yenibosna and G?ztepe sites, respectively. The higher metal rate in fine and medium coarse PM showed that the anthropogenic sources were the most significant pollutant source. Principal component analysis identified five components for PM namely traffic, road dust, coal and fuel oil combustion, and industrial.     

Elemental composition of Marrubium astracanicum Jacq. growing in tungsten-contaminated sites

Environmental Science and Pollution Research - This study evaluates the elemental (W, Mo, Zn, Fe, Cu, Cd, Mn, Pb, Cr, Co, B, and Bi) composition of Marrubium astracanicum Jacq. (Lamiaceae), around...     

Estimation of critical submergence for an intake in a stratified fluid media by neuro-fuzzy approach

Most of the large surface reservoirs are stably stratified throughout most or all of the year. One means of assisting in the management is to allow for the selective withdrawal from the reservoir. The value of the intake’s submergence when the upper layer fluids begin to be drawn into the intake is known as “critical submergence”. In this study, the critical submergence for a circular intake pipe in a stratified body is investigated. Experiments were conducted on a vertically flowing downward intake pipe in a still-water reservoir. Experimental results are compared with that of the neuro-fuzzy models.