Mutagenicity assessment of contaminated soil in the vicinity of industrial area

In the industrial area of Chinhat, Lucknow (India) wastewater coming from pesticide manufacturing and other industries is used to irrigate the agricultural crops. This practice has been polluting the soil and pollutants might reach the food chain. Gas chromatographic analysis revealed the presence of certain organochlorine pesticides in soil samples. Samples were extracted using different solvents, i.e., hexane, acetonitrile, methanol, chloroform, and acetone (all were HPLC-grade, SRL, India). Soil extracts were assayed for mutagenicity using Ames Salmonella/mammalian microsome test. Mutagenicity was observed in the test samples and TA98 was the most responsive strain for all the soil extracts (irrigated with wastewater) in terms of mutagenic index in the presence (+S9) and absence (−S9) of metabolic activation. In terms of slope (m) of linear dose–response curve for the most responsive strain TA98 exhibited highest sensitivity against the soil extracts in the presence and absence of S9 fraction. Hexane-extracted soil sample (wastewater) exhibited maximum mutagenicity in terms of net revertants per gram of soil in the presence and absence of S9 mix as compared to the other soil extracts. Groundwater-irrigated soil extracts displayed low level of mutagenicity as compared to wastewater-irrigated soil. The soil is accumulating a large number of pollutants due to wastewater irrigation and this practice of accumulation has an adverse impact on soil health.     

The Seasonal Variation of the Concentrations of Ozone, Sulfur Dioxide, and Nitrogen Oxides in Two Nigerian Cities

A combination of multivariate statistical methods including factor analysis, principal component analysis, principal component regression, and multiple linear regression (MLR) were employed to evaluate the influence of seasons on the concentrations of ozone, sulfur (IV) oxide, and oxides of nitrogen in ambient air of Nigerian cities of Lagos and Ilorin. The former city is located in the coastal area, and it is highly congested with a high intensity of marine, vehicular, and industrial activities, and the latter city is a medium size town, located in the central guinea savannah zone of Nigeria. Samples were collected using a high-volume sampler from near the ground at various sites of diverse human and industrial activities, during wet and dry seasons from 2003 to 2006. The PCA reveals three distinct groupings during the day for all data, which is a reflection of different factors contributing to the atmospheric chemistry of these cities. The predicted ozone concentration values by MLR agree fairly well with the measured data. The dependence of ozone on meteorological parameters including relative humidity, air temperature, and sun exposure and the precursor pollutants depends on weather and the anthropogenic activities. The results for the two cities indicate that reduction in the level of NO₂ is accompanied by an increase in the level of ozone, suggesting the interconversion between the two via photochemical activity.     

Adhesion Properties of Adhesive Prepared from Waste Polystyrene

Solid and soft forms of waste polystyrene have been treated with coumarone–indene resin and benzene to produce a new adhesive. The adhesive is prepared from various compositions of polystyrene (13–38 wt%), coumarone-indene resin (5–7%) and benzene (57–80%). Viscosity, peel strength and tensile shear strength of the adhesive is determined by a HAAKE Rotary Viscometer, Lloyd Adhesion Tester and Instron machine, respectively. Rolling ball technique was used to measure the tackiness of the adhesive. Results show that the adhesion property increases with increase in polystyrene composition and coating thickness. This observation is attributed to the increasing wettability of adhesive on the substrate.     

Inquiries into Malaysia's socio-technical disasters: recommendations and lessons learnt

Most democratic countries hold inquiries into disasters. One of their key functions is to establish the cause of an event and to learn lessons in order to prevent a recurrence. In addition, they offer an opportunity for communal catharsis, permitting the public to vent anger, distress and frustration and to exert pressure for policy changes. Malaysia has experienced six landmark socio-technical disasters since 1968, which resulted in the proposal or amendment of various safety/emergency acts and regulations. The authors used a grounded theory approach utilising a constant comparative method to analyse the recommendations made by the inquiries into these events. Data indicate that social and technical recommendations comprise 85 and 15 per cent, respectively, of the total recommendations made by the inquiry committees. This paper offers suggestions for improving the management of inquiry tribunals, as they will remain a valuable source of information for society and corporations to learn from past incidents.     

Photocatalytic degradation of endocrine disruptor Bisphenol-A in the presence of prepared CexZn1-xO nanocomposites under irradiation of sunlight

Photocatalytic degradation of Bisphenol A （BPA）, a representative endocrine disruptor chemical, was carried out under irradiation of sunlight in the presence of CexZn1-xO nanophotocatalyst. Cerium （Ce） ions were successfully incorporated into the bulk lattice of ZnO by simple co-precipitation process. The CexZn1-xO composite nanostructures exhibited higher photocatalytic efficiency than pure ZnO in the degradation of BPA under sunlight irradiation and nearly complete mineralization of BPA was achieved. The degradation rate was strongly dependent on factors such as the size and structure of catalyst, doping material concentration, BPA concentration, catalyst load, irradiation time and pH levels. This work suggested that the CexZn1-xO assisted photocatalytic degradation is a versatile, economic, environmentally benign and efficient method for BPA removal in the aqueous environment.     

Assessment of radiological hazard of NORM in Margalla Hills limestone, Pakistan

Studies on naturally occurring radioactive material (NORM) in the limestone from the Margalla Hills have been carried out by measuring gamma activity and to access its radiological implications if any. For data acquisition, a High-Purity Germanium detector was employed. The activity concentrations of (226)Ra, (232)Th, and (40)K were found to be 14.32?±?0.24, 2.05?±?0.04, and 13.80?±?0.20 Bq kg(-1), respectively. These values are relatively lower as compared to that in the limestone of other countries and much lower than the values reported for the natural building stones. The average specific activities due to (226)Ra were found to be higher when compared with (40)K and (232)Th. Indices of radium equivalent activity (Ra(eq)), internal hazard (H(in)), indoor absorbed gamma dose rate (D(R,)), and corresponding annual effective dose (E(eff)) were also determined for the limestone-made rooms. All of these indices were found to be in the lower ranges. The Margalla Hills limestone does not pose any excessive radiological health hazard as a building material and in industrial uses for a common man.     

Determination of sources of fine particles in different ambient atmospheres in South Korea using a chemical mass balance model

Abstract

To determine the sources of particulate matter less than 2.5?μm (PM_2.5 in different ambient atmospheres (urban, roadside, industrial, and rural sites), the chemical components of PM_2.5 such as ions (Cl^-, NO₃^-, SO₄^2-, NH₄⁺, Na⁺, K⁺, Ca²⁺, and Mg²⁺), carbonaceous species, and elements (Al, As, Ba, Cd, Cu, Fe, Mn, Ni, Pb, Se, V, and Zn) were measured. The average mass concentrations of PM_2.5 at the urban, roadside, industrial, and rural sites were 31.5?±?14.8, 31.6?±?22.3, 31.4?±?16.0, and 25.8?±?12.4?μg/m³, respectively. Except for secondary ammonium sulfate and ammonium nitrate, the model results showed that the traffic source (i.e., the sum of gasoline and diesel vehicle sources) was the most dominant source of PM_2.5 (17.1%) followed by biomass burning (13.8%) at the urban site. The major primary sources of PM_2.5 were consistent with the site characteristics (diesel vehicle source at the roadside site, coal-fired plants at the industrial site, and biomass burning at the rural site). Seasonal data from the urban site suggested that ammonium sulfate and ammonium nitrate were the most dominant sources of PM_2.5 during all seasons. Further, the contribution of road dust source to PM_2.5 increased during spring and fall seasons. We conclude that the determination of the major PM_2.5 sources is useful for establishing efficient control strategies for PM_2.5 in different regions and seasons.