Hybrid Composites Made from Oil Palm Empty Fruit Bunches/Jute Fibres: Water Absorption,Thickness Swelling and Density Behaviours

In this research, hybrid composite materials were prepared from combination of oil palm Empty fruit bunches (EFB) fibre and jute fibre as reinforcement, epoxy as polymer matrix. This study intended to investigate the effect of jute fiber hybridization and different layering pattern on the physical properties of oil palm EFB-Epoxy composites. Water absorption and thickness swelling test reveal that hybrid composite shows a moderate water absorption which is 11.20% for hybrid EFB/Jute/EFB composite and 6.08% for hybrid Jute/EFB/Jute composite. The thickness swelling and water absorption of the hybrid composites slightly increased as the layering pattern of hybrid composites changed. Hybrid composites are more water resistance and dimensional stable compare to the pure EFB composites. This is attributed to the more hydrophilic nature of EFB composites. Hybridization of oil palm EFB composites with jute fibres can improve the dimensional stability and density of pure EFB and Jute fibre reinforced composites has higher density of 1.2 g/cm³ compared to all other composites.     

Monitoring trace metals in different tissues of Cyprinus carpio from the Indus River in Pakistan

This replicated 4×2 factorial study investigated the bioaccumulation of selected metals (Mn, Pb, Zn, Hg and Cr) in four tissues (gills, liver, muscle and skin) of common carp (Cyprinus carpio) domiciled in two sites (upstream and downstream) of Indus River in Mianwali district of Pakistan. The data were statistically compared for the main effects of the site and fish organs and their interaction on the bioaccumulation pattern of these metals in fish organs at P?P?相似文献   

Myco- and phyco-remediation of polychlorinated biphenyls in the environment: a review

Environmental Science and Pollution Research - Polychlorinated biphenyls (PCBs) are toxic organic compounds and pose serious threats to environment and public health. PCBs still exist in different...     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Efficient DDT and trichlorophenol detoxification using NaBH4 and Devarda alloy

DDT—1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—is a pesticide that has been widely used to control insects in agriculture. TCP—2,4,6-trichlorophenol—has been used in pesticide formulations as a preservative, disinfectant and antiseptic. Detoxification of DDT and TCP is very difficult due to their stable chemical structure. Here, a mixture of NaBH₄ and Devarda alloy was applied for the first time to detoxify DDT and TCP. Results show 94 % dechlorination of DDT at 100 °C and 97 % dechlorination of TCP at 80 °C. The presence of diphenyl ethane suggests the complete dechlorination of DDT. The formation of benzene suggests a strong reduction. The method is efficient, cost-effective and may be applied at the industrial-level.     

Aerobic treatment of palm oil mill effluent

In this study treatment of palm oil mill effluent (POME) was investigated using aerobic oxidation based on an activated sludge process. The effects of sludge volume index, scum index and mixed liquor suspended solids during the acclimatizing phase and biomass build-up phase were investigated in order to ascertain the reactor stability. The efficiency of the activated sludge process was evaluated by treating anaerobically digested and diluted raw POME obtained from Golden Hope Plantations, Malaysia. The treatment of POME was carried out at a fixed biomass concentration of 3900+/-200mg/L, whereas the corresponding sludge volume index was found to be around 105+/-5mL/g. The initial studies on the efficiency of the activated sludge reactor were carried out using diluted raw POME for varying the hydraulic retention time, viz: 18, 24, 30 and 36h and influent COD concentration, viz: 1000, 2000, 3000, 4000 and 5000mg/L, respectively. The results showed that at the end of 36h of hydraulic retention time for the above said influent COD, the COD removal efficiencies were found to be 83%, 72%, 64%, 54% and 42% whereas at 24h hydraulic retention time they were 57%, 45%, 38%, 30% and 27%, respectively. The effectiveness of aerobic oxidation was also compared between anaerobically digested and diluted raw POME having corresponding CODs of 3908 and 3925mg/L, for varying hydraulic retention time, viz: 18, 24, 30, 36, 42, 48, 54 and 60h. The dissolved oxygen concentration and pH in the activated sludge reactor were found to be 1.8-2.2mg/L and 7-8.5, respectively. The scum index was found to rise from 0.5% to 1.9% during the acclimatizing phase and biomass build-up phase.     

Spatial distribution of polybrominated diphenyl ethers in coastal marine sediments receiving industrial and municipal effluents in Kuwait

Polybrominated diphenyl ether (PBDE) concentrations were measured in surficial sediments from coastal sediments receiving industrial and municipal effluents in Kuwait. The summation PBDE concentrations varied by two orders of magnitude ranging from 80 to 3800 pg g(-1)dw. The congener distribution was dominated by BDE 183, with minor contributions from BDEs 154 and 153. The similarity between the congener profile to that of the technical octa formulation (Bromkal 79-8DE) suggests a source of this product in Kuwait. The observed gradient in concentration distribution, with high summation PBDE concentrations near the shore and an exponential decrease seaward, indicates that wastewater discharge from industrial activities in the study area is the primary source of these compounds in the sediments.     

Assessment of the processing and sale of marine fish and its effects on the livelihood of women in Mfantseman Municipality,Ghana

Fish is a key source of protein for many households in Ghana. It is also an essential source of income to many households in the coastal communities of Ghana. The importance of the fisheries sector to the socio-economic development of the country cannot be over emphasised. Women dominate the fishing value chain in Ghana but paradoxically, the study of their activities has not attracted the attention of researchers and policy makers. This study examined the processing and sale of smoked marine fish and its effects on the livelihood of women in Mfantseman Municipality. The survey was conducted in four communities. A sample size of 363 was drawn from women in the industry and institutions whose activities are related to the industry. The data were analysed using quantitative and qualitative methods. Findings from the study revealed that the industry offers employment opportunity for the majority of women in the municipality, and it is an important source of income to them. Further, the industry has potentials for reducing poverty and enhancing economic empowerment of women in the district. However, women in the industry are confronted with challenges which include health risks that erode whatever gains made by them. The study concludes that the municipal assembly must spearhead and provide a conducive environment for this economic activity to flourish as a way of reducing poverty among women in the municipality.     

Performance of photocatalytic reactors using immobilized TiO2 film for the degradation of phenol and methylene blue dye present in water stream

TiO2 thin film photocatalyst was successfully synthesized and immobilized on glass reactor tube using sol-gel method. The synthesized TiO2 coating was transparent, which enabled the penetration of ultra-violet (UV) light to the catalyst surface. Two photocatalytic reactors with different operating modes were tested: (a) tubular photocatalytic reactor with re-circulation mode and (b) batch photocatalytic reactor. A new proposed TiO2 synthesized film formulation of 1 titanium isopropoxide: 8 isopropanol: 3 acetyl acetone: 1.1 H2O: 0.05 acetic acid (in molar ratio) gave excellent photocatalytic activity for degradation of phenol and methylene blue dye present in the water. The half-life time, t1/2 of photocatalytic degradation of phenol was 56 min at the initial phenol concentration of 1000 microM in the batch reactor. In the tubular photocatalytic reactor, 5 re-circulation passes with residence time of 2.2 min (single pass) degraded 50% of 40-microM methylene blue dye. Initial phenol concentration, presence of hydrogen peroxide, presence of air bubbling and stirring speed as the process variables were studied in the batch reactor. Initial methylene blue concentration, pH value, light intensity and reaction temperature were studied as the process variables in the tubular reactor. The synthesized TiO2 thin film was characterized using SEM, XRD and EDX analysis. A comparative performance between the synthesized TiO2 thin film and commercial TiO2 particles (99% anatase) was evaluated under the same experimental conditions. The TiO2 film was equally active as the TiO2 powder catalyst.