Monitoring the impact of urban effluents on mineral contents of water and sediments of four sites of the river Ravi, Lahore

We assessed the impact of urban effluents on the concentrations of selected minerals (Cd, Cr, Cu, Fe, Pb, Zn, Mn, Ni, and Hg) in river Ravi before and after its passage through Lahore city. Water and sediment samples were collected from three lowly to highly polluted downstream sites (Shahdera (B), Sunder (C), and Balloki (D)) alongside the least polluted upstream site (Siphon (A)) during high and low river flow seasons. All the mineral concentrations increased up to site C but stabilized at site D, showing some recovery as compared to the third sampling site. The trend of mean mineral concentration was significantly higher during the low than the high flow season at all the sites. The mean Hg concentrations approached 0.14 and 0.12 mg/l at site A which increased (%) up to 107 and 25 % at site B, 1,700 and 1,317 % at site C, and 1,185 and 1,177 % at site D during low and high river flows, respectively. All mineral concentrations were much higher in the sediment than the water samples. Mean Cd (917 %), Cr (461 %), Cu (300 %), Fe (254 %), Pb (179 %), Zn (170 %), Mn (723 %), Ni (853 %), and Hg (1,699 %) concentrations were higher in riverbed sediments sampled from site C in comparison with the sample collected at site A during low flow season. The domestic and industrial discharges from Lahore city have created undesirable water qualities during the low river flow season. As majority of the mineral levels in the river Ravi were higher than the permissible and safe levels, this is of immediate concern for riverine fish consumers and the users of water for recreation and even irrigation. The use of these waters may pose health risks, and therefore, urgent intervention strategies are needed to minimize river water pollution and its impact on fish-consuming communities of this study area and beyond.     

Distributed inner states TiO2-coated plastic fibers as photocatalysts for decomposing organic pollutants in water

A new method for decomposing organic pollutants in water is proposed. First, we used less pure titanium dioxide (TiO₂) particles as a photocatalyst material to achieve an absorption band that would be as wide as the spectrum for visible sunlight. The TiO₂ particles were coated onto the surface of transparent plastic fibers and used to decompose test solutions of rhodamine that were placed in open sunlight for several days. We observed an effective decomposition, and after completing the decomposition process, the fibers could be removed easily from the cleaned water leaving no TiO₂ in the water. Because there was no significant change in the elemental composition of the fiber surface after being used for cleaning the water, the coated fiber can be used repeatedly.     

High compressive strength of home waste and polyvinyl acetate composites containing silica nanoparticle filler

Simple mixing and hot pressing methods were used to make composites from home waste—in particular, paper and dry leaves—using polyvinyl acetate (PVAc) as an adhesive and silica nanoparticles as filler. The optimum composition for the strongest composites, in terms of compressive strength, had a mass ratio of silica nanoparticles/PVAc/(paper + dry leaves) of 3:80:280. With this mass ratio, a compressive strength of 68.50 MPa was obtained for samples prepared at a pressing temperature of 150°C, pressing pressure of 100 MPa, and pressing time of 20 min. The addition of silica nanoparticles increased the compressive strength by about 50%, compared with composites made without the addition of nanosilica (45.60 MPa). Higher compressive strength was obtained at a higher pressing pressure. At a pressing pressure of 120 MPa, pressing temperature of 150°C, and pressing time of 20 min, a compressive strength of 69.10 MPa was obtained. When the pressing time was increased to 45 min at a pressing pressure of 120 MPa, a compressive strength of 84.37 MPa was measured. A model was also proposed to explain the effects of pressing pressure and pressing time on compressive strength. The model predictions were in good agreement with the experimental data.     

Particulate air quality model predictions using prognostic vs. diagnostic meteorology in central California

Comparisons were made between three sets of meteorological fields used to support air quality predictions for the California Regional Particulate Air Quality Study (CRPAQS) winter episode from December 15, 2000 to January 6, 2001. The first set of fields was interpolated from observations using an objective analysis method. The second set of fields was generated using the WRF prognostic model without data assimilation. The third set of fields was generated using the WRF prognostic model with the four-dimensional data assimilation (FDDA) technique. The UCD/CIT air quality model was applied with each set of meteorological fields to predict the concentrations of airborne particulate matter and gaseous species in central California. The results show that the WRF model without data assimilation over-predicts surface wind speed by ～30% on average and consequently yields under-predictions for all PM and gaseous species except sulfate (S(VI)) and ozone(O₃). The WRF model with FDDA improves the agreement between predicted and observed wind and temperature values and consequently yields improved predictions for all PM and gaseous species. Overall, diagnostic meteorological fields produced more accurate air quality predictions than either version of the WRF prognostic fields during this episode. Population-weighted average PM_2.5 exposure is 40% higher using diagnostic meteorological fields compared to prognostic meteorological fields created without data assimilation. These results suggest diagnostic meteorological fields based on a dense measurement network are the preferred choice for air quality model studies during stagnant periods in locations with complex topography.     

Determining the heavy metal pollution in Denizli (Turkey) by using Robinio pseudo-acacia L

The leaves of Robinia pseudo-acacia L. (Fabaceae) were evaluated as a biomonitors of heavy metal contamination in Denizli city, Turkey. Concentrations of Fe, Zn, Pb, Cu, Mn and Cd were determined in washed and unwashed leaves and soils collected from a wide range of sites with different degrees of metal pollution (industry, urban roadside, suburban) and from a rural (control) site by atomic absorption spectrometry. All the elements that measured were found to be at high levels in samples collected at industrial sites, except for lead and copper which were found at high levels in samples collected from urban roadsides that associated with the road traffic. The strong correlation between the degree of contamination and concentrations in all plant leaves assessed display that the leaves of R. pseudo-acacia reflect the environmental changes accurately, and that they seem as an effective biomonitor of environmental quality in areas subjected to industrial and traffic pollutions.     

Floating roof storage tank boilover

Storage tanks are important facilities for the major hazard installations (MHIs) to store large quantity of crude oil. There is several fire types can occur with large diameter open top floating roof storage tanks. Boilover is considered one of the most dangerous fires in large-scale oil tank. The world has witnessed many incidents due to boilover in floating roof storage tank. Boilover problem has been studied in experiments and by models to understand how to control the boilover phenomena. An experimental study has been carried out in Jebel Dhanna (JD) terminal area by Abu Dhabi Company for Onshore Oil Operations (ADCO) with support of Resource Protection International (RPI) consultant. 2.4 m diameter and 4.5 m diameters pans have been used to study the characteristics of the large oil-tank fires (i) to gain more knowledge of the boilover phenomenon of crude oil (ii) verify if the crude oil stored by ADCO would boilover (ii) estimation of rate of hot-zone growth and the period needed from ignition to boilover (iii) estimation of radiant heat and consequences of boilover. This paper presents an overview on the floating roof storage tank boilover. The paper also presents briefly boilover experimental research study carried out by ADCO.     

USE OF WATER FROM THE ANCIENT MAKKAH GALLERIES FOR IRRIGATION1

ABSTRACT: Due to the spread of Islam in the seventh century the number of pilgrims to the City of Makkah increased sharply, resulting in an acute water shortage. To solve this problem, galleries were built to collect water from the upstream of Wadi Naaman and transfer it to Makkah. Expansion of Makkah and the absence of any mapping of the galleries have resulted in the destruction of a part of the galleries. This caused a discontinuity of flow in the galleries and, consequently, the ground water table is rising at a rate of 0.48 m/yr, causing environmental problems. Research was conducted to rehabilitate the destructed part of the galleries, and to find an appropriate use for the ground water. The study found that the quality of the ground water is suitable for landscaping purposes, that is, for the irrigation of trees and ornamental plants.