Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Radioactivity and radiological risk associated with effluent sediment containing technologically enhanced naturally occurring radioactive materials in amang (tin tailings) processing industry

The processing of amang, or tin tailings, for valuable minerals has been shown to technologically enhance NORM and this has stirred significant radiological safety and health concerns among Malaysia's regulatory authority. A growing radiological concern is now focused on the amang effluent containing NORM in recycling ponds, since these ponds may be reclaimed for future residential developments. A study was carried out to assess the radiological risk associated with amang processing and the accumulated effluent in the recycling ponds. Twenty-six sediment samples from the recycling ponds of two amang plants in the states of Selangor and Perak, Malaysia, were collected and analyzed. The maximum activity concentrations of (238)U, (226)Ra, (232)Th and (40)K recorded in sediments from these ponds were higher than Malaysia's and the world's natural highest. Correspondingly, the mean radium equivalent activity concentration indices, Ra(eq), and gamma radiation representative level index, I(gammar), were higher than the world's average. The enhancement of NORM in effluent sediments as a consequence of amang processing, and the use of a closed water management recycling system created Effective Dose Rates, E (nSv h(-1)), that signal potential environmental radiological risks in these ponds, should they be reclaimed for future land use.     

TiO2/Ag modified penta-bismuth hepta-oxide nitrate and its adsorption performance for azo dye removal

A modified hydrophilic penta-bismuth hepta-oxide nitrate (Bi₅O₇NO₃) surface was synthesized via a precipitation method using TiO₂ and Ag as modified agents. The synthesized product was characterized by different analytical techniques. The removal efficiency was evaluated using mono-and di-sulphonated azo dyes as model pollutants. Different kinetic, isotherm and diffusion models were chosen to describe the adsorption process. X-ray photoelectron spectroscopy (XPS) results revealed no noticeable differences in the chemical states of modified adsorbent when compared to pure Bi₅O₇NO₃;however, the presence of hydrophilic centres such as TiO₂ and Ag developed positively charged surface groups and improved its adsorption performance to a wide range of azo dyes. Dyes removal was found to be a function of adsorbent dosage, initial dye concentration, solution pH and temperature. The reduction of Langmuir 1,2-mixed order kinetics to the second or first-order kinetics could be successfully used to describe the adsorption of dyes onto the modified adsorbent. Mass transfer can be described by intra-particle diffusion at a certain stage, but it was not the rate limiting step that controlled the adsorption process. Homogenous behavior of adsorbent surface can be explored by applying Langmuir isotherm to fit the adsorption data.     

Rapid release of heavy metals and anions from polyethylene laminated paper cups into hot water

Polyethylene laminated disposable paper cups are commonly used as a container for hot drinks, yet there is limited knowledge on the transfer of contaminants from the cup to the drink. Here we poured 95^?C hot water in 14 cups, to simulate the preparation of hot beverage for daily use. We studied the water composition after 15 min by inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography. Results show the presence of metals such as vanadium, chromium, copper, cobalt and arsenic at concentration ranging from 0.04 to 1.80 µg/L. Nitrate, nitrite, chloride, bromate, fluoride and sulfate ions were also detected at concentration from 0.003 to 49.21 mg/L. All concentrations are below the WHO maximum permissible limits in drinking water. However, the levels of vanadium at 1.24 µg/L and fluoride ions at 1.03 mg/L are likely to induce a health risk by bioaccumulation after long-term water ingestion. Therefore paper cups composition should be modified to avoid the release of contaminants in hot drinks.

     

Worldwide contamination of water by fluoride

Fluoride contamination in water is a major problem across the globe, with health hazards such as dental and skeletal fluorosis. Most earlier studies are confined to local or regional scales. As the problem has serious socioeconomic implications, there is a need for a global perspective. Thus, here we review worldwide research for nearly a century on fluoride contamination in water. We investigated the distribution of fluoride contamination in water, its sources, mobilization and association. The major findings are: (1) Anomalous fluoride concentration in groundwater is mainly confined to arid and semiarid regions of Asia and North Africa. (2) The geogenic sources of fluoride in water are mainly fluorine-bearing minerals in rocks and sediments, whereas anthropogenic sources of fluoride in water are mainly pesticides and industrial waste. (3) Fluoride mobilization from geogenic sources is mainly controlled by alkalinity and temperature. (4) Fluoride occurrence in water is associated with ions such as sodium, arsenic chloride and bicarbonate. There are few associations of fluoride in water with calcium and magnesium.     

Contamination status of arsenic,lead, and cadmium of different wetland waters

The present investigation was conducted to determine the contamination status of arsenic (As), cadmium (Cd), and lead (Pb) in the wetland waters of Bhaluka in Bangladesh. Water samples were collected from 15 selected wetlands of Bhaluka region and analyzed using an atomic absorption spectrophotometer. Estimated results of three metals detected were As (7–80?µg?L^?1), Pb (0–86?µg?L^?1) and Cd (0–70?µg?L^?1) in water samples in all wetlands. The level of As in all investigated wetlands (93%) was higher than that of WHO recommended permissible limit of drinking water except Alanga wetland. However, As levels were higher than that recommended for livestock water quality levels. Eighty-seven percent of the investigated wetlands showed lower content of Pb than WHO recommended permissible limit of drinking water, but two wetland waters (Dohuria-1 and Chowdhuri) were polluted with higher Pb levels. Sixty-seven percent of the investigated wetlands displayed higher levels of Cd than WHO recommended permissible limit in drinking water. Dissolved organic material showed no significant difference among the 15 investigated wetlands water, but total dissolved solids was significantly greater. The condition of the water of all wetlands was basic pH. All water samples were applied to linear regression equation and correlation coefficients where values showed no significant differences. Data demonstrate that the estimated high metal concentrations of these ponds may contribute to bioaccumulation within plants, food grains and shrimp.     

Effect of TiC Nanoparticles Reinforcement in Coir Fiber Based Bio/Synthetic Epoxy Hybrid Composites: Mechanical and Thermal Characteristics

Journal of Polymers and the Environment - The present investigation was performed to study the effect of titanium carbide (TiC) nanoparticles and coir fiber as hybrid reinforcements on the...     

Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Urbanization reduces resource use efficiency of phytoplankton community by altering the environment and decreasing biodiversity

Urbanization often exerts multiple effects on aquatic and terrestrial organisms, including changes in biodiversity, species composition and ecosystem functions. However, the impacts of urbanization on river phytoplankton in subtropical urbanizing watersheds remain largely unknown. Here, we explored the effects of urbanization on phytoplankton community structure（i.e., biomass, community composition and diversity） and function（i.e., resource use efficiency） in a subtropical river at watershed sca...     

Interrelationships among foreign direct investments,renewable energy,and CO2 emissions for different European country groups: a panel ARDL approach

Environmental Science and Pollution Research - This study estimated unbalanced panel data analysis to investigate the relationship among CO2 emissions, GDP, renewable and non-renewable energy...