Temporal variations of fine and coarse particulate matter sources in Jeddah,Saudi Arabia

This study provides the first comprehensive analysis of the seasonal variations and weekday/weekend differences in fine (aerodynamic diameter <2.5 μm; PM_2.5) and coarse (aerodynamic diameter 2.5–10 μm; PM_2.5–10) particulate matter mass concentrations, elemental constituents, and potential source origins in Jeddah, Saudi Arabia. Air quality samples were collected over 1 yr, from June 2011 to May 2012 at a frequency of three times per week, and analyzed. The average mass concentrations of PM_2.5 (21.9 μg/m³) and PM₁₀ (107.8 μg/m³) during the sampling period exceeded the recommended annual average levels by the World Health Organization (WHO) for PM_2.5 (10 μg/m³) and PM₁₀ (20 μg/m³), respectively. Similar to other Middle Eastern locales, PM_2.5–10 is the prevailing mass component of atmospheric particulate matter at Jeddah, accounting for approximately 80% of the PM₁₀ mass. Considerations of enrichment factors, absolute principal component analysis (APCA), concentration roses, and backward trajectories identified the following source categories for both PM_2.5 and PM_2.5–10: (1) soil/road dust, (2) incineration, and (3) traffic; and for PM_2.5 only, (4) residual oil burning. Soil/road dust accounted for a major portion of both the PM_2.5 (27%) and PM_2.5–10 (77%) mass, and the largest source contributor for PM_2.5 was from residual oil burning (63%). Temporal variations of PM_2.5–10 and PM_2.5 were observed, with the elevated concentration levels observed for mass during the spring (due to increased dust storm frequency) and on weekdays (due to increased traffic). The predominant role of windblown soil and road dust in both the PM_2.5 and PM_2.5–10 masses in this city may have implications regarding the toxicity of these particles versus those in the Western world where most PM health assessments have been made in the past. These results support the need for region-specific epidemiological investigations to be conducted and considered in future PM standard setting.

Implications: Temporal variations of fine and coarse PM mass, elemental constituents, and sources were examined in Jeddah, Saudi Arabia, for the first time. The main source of PM_2.5–10 is natural windblown soil and road dust, whereas the predominant source of PM_2.5 is residual oil burning, generated from the port and oil refinery located west of the air sampler, suggesting that targeted emission controls could significantly improve the air quality in the city. The compositional differences point to a need for health effect studies to be conducted in this region, so as to directly assess the applicability of the existing guidelines to the Middle East air pollution.     

Relationships between certain individual characteristics and occupational accidents

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ² test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.     

On–off control of aeration time in the simultaneous removal of ammonia and manganese using a biological aerated filter system

The biological aerated filter (BAF) system, a new alternative in drinking water treatment, was designed to remove NH₄⁺–N and Mn²⁺ simultaneously. This study aimed to control the aeration time in the BAF system for simultaneous NH₄⁺–N and Mn²⁺ removal to achieve the Malaysian effluent quality regulation for drinking water. The experiment was conducted under four strategies of S1, S2, S3 and S4. The results demonstrated that acceptable levels of NH₄⁺–N and Mn²⁺ were achieved over a 6 h aeration period (S1), producing effluent concentrations of 0.7 mg/L (93.2% removal) and 0.08 mg/L (79.6% removal), respectively. At the initial treatment of S1 and S2, the dissolved oxygen (DO) level rapidly increased until it reached a saturated concentration (6.8 mg/L DO) after 2 h period. Automatic on–off aeration time to maintain 3 mg/L DO set point (S4) resulted with a good effluent quality of NH₄⁺–N and Mn²⁺ compared with the 2 mg/L DO set point (S3) which did not meet the regulated standard limits. Through the automatic on–off aeration time, the saturated and excessive DO levels in the BAF system can be avoided consequently reduce the wastage of energy and electrical consumption for simultaneous NH₄⁺–N and Mn²⁺ removal from drinking water treatment.     

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Journal of Polymers and the Environment - The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and...     

The effect of nanosilica incorporation on the mechanical properties of concrete exposed to elevated temperature: a review

Environmental Science and Pollution Research - Exposing concrete to high temperatures leads to harmful effects in its mechanical and microstructural properties, and ultimately to total failure. In...     

The influence of FDI on GHG emissions in BRI countries using spatial econometric analysis strategy: the significance of biomass energy consumption

Environmental Science and Pollution Research - Indeed, the Belt and Road Initiative (BRI) plays an increasingly important role in global economic and climate change mitigation. However, scientists...     

Level of sustainability reporting of Malaysian IPO companies

Environmental Science and Pollution Research - This paper aims to determine the level of sustainability reporting (SR) among Malaysian initial public offering (IPO) companies. Due to a lack of...     

Distribution and baseline values of trace elements in the sediment of Var River catchment,southeast France

This study reports on the determination of trace element (TE)—Li, As, Co, Cs, Cu, Pb, U, and Zn—and major element (ME)—Si, Al, Fe, Mg, Ca, Mn, Na, and K—concentrations in 18 riverbed sediments and a sediment core from the Var River catchment using inductively coupled plasma mass spectrometry (ICP-MS). The results were compared with those of a reference sediment core, and the contribution of clay and organic carbon contents in the distribution of TE and ME in the sediment samples was investigated. The mean concentrations of the ME were comparable in both core and riverbed samples and were within the natural averages. In the case of TE, the concentrations were lower in riverbed sediment samples than those found in the sediment core. High mean concentration of As was observed (7.6 μg g^?1) in both core and riverbed sediments, relatively higher than the worldwide reported values. The obtained data indicated that the natural high level of arsenic might be originated from the parent rocks, especially metamorphic rocks surrounding granites and from Permian sediments. Statistical approach, viz., Pearson correlation matrix, was applied to better understand the correlation among TE in both riverbed and sediment core samples. No significant metallic contamination was detected in the low Var valley despite of the localization of several industrial facilities. Therefore, results confirm that the concentrations of the TE obtained in the riverbed sediments could be considered as a baseline guide for future pollution monitoring program.     

Characteristics of granular sludge developed in an upflow anaerobic sludge fixed-film bioreactor treating palm oil mill effluent.

In the present study, characteristics of the granular sludge (including physical characteristics under stable conditions and process shocks arising from suspended solid overload, soluble organic overload, and high temperature; biological activity; and sludge kinetic evaluation in a batch experiment) developed in an upflow anaerobic sludge blanket fixed-film reactor for palm oil mill effluent (POME) treatment was investigated. The main aim of this work was to provide suitable understanding of POME anaerobic digestion using such a granular sludge reactor, particularly with respect to granule structure at various operating conditions. The morphological changes in granular sludge resulting from various operational conditions was studied using scanning electron microscopy and transmission electron microscopy images. It was shown that the developed granules consisted of densely packed rod- (Methanosaeta-like microorganism; predominant) and cocci- (Methanosarsina) shaped microorganisms. Methanosaeta aggregates functioned as nucleation centers that initiated granule development of POME-degrading granules. Under the suspended solid overload condition, most of the granules were covered with a thin layer of fiberlike suspended solids, so that the granule color changed to brown and the sludge volume index also increased to 24.5 from 12 to 15 mL/g, which caused a large amount of sludge washout. Some of the granules were disintegrated because of an acidified environment, which originated from acidogenesis of high influent organic load (29 g chemical oxygen demand [COD]/L d). At 60 degrees C, the rate of biomass washout increased, as a result of disintegration of the outer layer of the granules. In the biological activity test, approximately 95% COD removal was achieved within 72 hours, with an initial COD removal rate of 3.5 g COD/L d. During POME digestion, 275 mg calcium carbonate/L bicarbonate alkalinity was produced per 1000 mg COD(removed)/ L. A consecutive reaction kinetic model was used to simulate the data obtained from the sludge activity in the batch experiment. The mathematical model gave a good fit with the experimental results (R2 > 0.93). The slowest step was modeled to be the acidification step, with a rate constant between 0.015 and 0.083 hours(-1), while the rate constant for the methanogenic step was obtained to be between 0.218 and 0.361 hours(-1).     

Therapeutic role of garlic and vitamins C and E against toxicity induced by lead on various organs

Environmental Science and Pollution Research - Due to industrial and urban sewage, the metal contaminations in aquatic and terrestrial environments are increasing day by day, especially in...