Phytoremediation and sequestration of soil metals using the CRISPR/Cas9 technology to modify plants: a review

Environmental Chemistry Letters - Soil contamination by toxic metals is a major health issue that could be partly solved by using genetically-modified plants. For that, the recently developed...     

Distribution of improved cook stoves: analysis of field experiments using strategic niche management theory

Close to three billion people globally and over 800 million in India are dependent on direct combustion of unprocessed solid biomass fuels in inefficient traditional mud stoves. Current cooking practices, besides causing serious health problems, are also being linked to emissions of climate change and pollution agents such as black carbon and ozone precursors. In India several initiatives have been taken up to tackle the problem but the present trajectory of limited technical and social change in cooking energy use is nonetheless persistent in rural areas. In order to develop and scale up alternative cooking technology options, we have analyzed, using the principles of strategic niche management, two projects implemented by The Energy and Resources Institute (TERI) in nine villages in India. The assessment, while highlighting reasons for stability of the current cooking regime, also points to triggers that can destabilize the regime. The focus is also on assessing the influence of protection in the form of subsidies on the process of transition. User preferences relating to social and technical aspects have been analyzed, pointing to forced draft cookstoves as the preferred option notwithstanding cost reductions to address affordability concerns. The assessment indicates that while it is critically important to understand and address the preferences of users and to improve the technology, scaling up will depend on stove cost reduction through further research. Creativity in effective financing schemes and support structures put in place by fostering public–private partnerships are also needed.     

Catalytic pyrolysis of car tire waste using expanded perlite

In this study, the non-catalytic and catalytic pyrolysis experiments were conducted on the sample of tire waste using expanded perlite as an additive material to determine especially the effect of temperature and catalyst-to-tire ratio on the products yields and the compositions and qualities of pyrolytic oils (NCPO and CPO). Non-catalytic studies, which were carried out under the certain conditions (a nitrogen flow of 100 mL/min and a heating rate of 10 °C/min), showed that the highest yield of pyrolytic oil (NCPO) was 60.02 wt.% at 425 °C. Then, the catalytic pyrolysis studies were carried out at catalyst-to-tire ratio range of 0.05-0.25 and the highest catalytic pyrolytic oil (CPO) yield was 65.11 wt.% at the ratio of 0.10 with the yield increase of 8.48 wt.% compared with the non-catalytic pyrolysis. Lastly, the pyrolytic oils were characterized with applying a various techniques such as elemental analyses and various chromatographic and spectroscopic techniques (GC-MS, ¹H NMR, FT-IR, etc.). The characterization results revealed that the pyrolytic oils which were complex mixtures of C₅-C₁₅ organic compounds (predominantly aromatic compounds) and also the CPO compared to the NCPO was more similar to conventional fuels in view of the certain fuel properties.     

First report on development of quantitative interspecies structure-carcinogenicity relationship models and exploring discriminatory features for rodent carcinogenicity of diverse organic chemicals using OECD guidelines

Different regulatory agencies in food and drug administration and environmental protection worldwide are employing quantitative structure-activity relationship (QSAR) models to fill the data gaps related with properties of chemicals affecting the environment and human health. Carcinogenicity is a toxicity endpoint of major concern in recent times. Interspecies toxicity correlations may provide a tool for estimating sensitivity towards toxic chemical exposure with known levels of uncertainty for a diversity of wildlife species. In this background, we have developed quantitative interspecies structure-carcinogenicity correlation models for rat and mouse [rodent species according to the Organization for Economic Cooperation and Development (OECD) guidelines] based on the carcinogenic potential of 166 organic chemicals with wide diversity of molecular structures, spanning a large number of chemical classes and biological mechanisms. All the developed models have been assessed according to the OECD principles for the validation of QSAR models. Consensus predictions for carcinogenicity of the individual compounds are presented here for any one species when the data for the other species are available. Informative illustrations of the contributing structural fragments of chemicals which are responsible for specific carcinogenicity endpoints are identified by the developed models. The models have also been used to predict mouse carcinogenicities of 247 organic chemicals (for which rat carcinogenicities are present) and rat carcinogenicities of 150 chemicals (for which mouse carcinogenicities are present). Discriminatory features for rat and mouse carcinogenicity values have also been explored.     

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.     

Pretreatment of banana agricultural waste for bio-ethanol production: Individual and interactive effects of acid and alkali pretreatments with autoclaving,microwave heating and ultrasonication

Banana agricultural waste is one of the potential lignocellulosic substrates which are mostly un-utilized but sufficiently available in many parts of the world. In the present study, suitability of banana waste for biofuel production with respect to pretreatment and reducing sugar yield was assessed. The effectiveness of both acid and alkali pretreatments along with autoclaving, microwave heating and ultrasonication on different morphological parts of banana (BMPs) was studied. The data were statistically analyzed using ANOVA and numerical point prediction tool of MINITAB RELEASE 14. Accordingly, the optimum cumulative conditions for maximum recovery of reducing sugar through acid pretreatment are: leaf (LF) as the substrate with 25 min of reaction time and 180 °C of reaction temperature using microwave. Whereas, the optimum conditions for alkaline pretreatments are: pith (PH) as the substrate with 51 min of reaction time and 50 °C of reaction temperature using ultrasonication (US).     

Experimental investigation on mechanical and metallurgical properties of super duplex stainless steel joints using friction welding process

Friction welding is one of the most economical and highly practicable methods in joining similar and dissimilar metals. In this study, high-quality welds are produced in the super duplex stainless steel by continuous drive friction welding successfully. Design of experiment was done using central composite design of response surface methodology. In the present work, the microstructure and mechanical properties of friction welded super duplex stainless steel (UNS S32760) were examined. The base material has a microstructure consisting of the ferrite matrix with austenite islands. Ferrite content was analyzed through the phase analyzer software and found that it is in the range of 42–55% in all weld metals. The phases were further analyzed through X-ray diffraction method. All the weld metals have higher hardness than the base metals. Weld transverse tensile failures consistently occurred away from the weld zone and exhibit more hardness, yield and ultimate tensile strengths than the base material. The austenite content increases with nitrogen concentration. Nitrogen could enhance the yield stress and ultimately tensile strength of super duplex stainless steel. Secondary phase precipitation is not observed in the welded joint probably due to the shorter heating times.     

To reduce and not to reduce resource consumption? That is two questions

Recent research shows that because they rely on separate goals, cognitions about not performing a behaviour are not simple opposites of cognitions about performing the same behaviour. Using this perspective, two studies (N = 758 & N = 104) examined the psycho-social determinants of reduction in resource consumption. Results showed that goals associated with reducing versus not reducing resource consumption were not simple opposites (Study 1). Additionally, the discriminant validity of the Theory of Planned Behaviour constructs associated with reducing versus not reducing resource consumption was demonstrated (Study 1 & 2). Moreover, results revealed the incremental validity of both Intentions (to reduce and to not reduce resource consumption) for predicting a series of behaviours (Study 1 & 2). Finally, results indicated a mediation role for the importance of ecological dimensions on the effect of both Intentions on a mock TV choice and a mediation role for the importance of non ecological dimensions on the effect of Intention of not reducing on the same TV choice. Discussion is organized around the consequences, at both theoretical and applied levels, of considering separate motivational systems for reducing and not reducing resource consumption.