Nanoscience in food and agriculture: research,industries and patents

High population rise and climate changes are increasing issues of agricultural production and food safety. Nanotechnology is finding revolutionary applications to improve agricultural and food systems, notably for better crop production and food preservation. Here we review research, industrial and patent trends of nanoscience in food and agriculture. In a literature survey, we found 44.6% publications in the nano-food research area during the years 2013–2015 and 59.09% publications in the nano-agriculture research area during 2012–2015. USA is leading in the development of nanotechnology firms with a maximum share of 75.5% of the total firms, followed by Germany and France with 8.10 and 4.74%, respectively. USA is leading in the nano-food research with 22 granted patents, whereas China is placed first in nano-agriculture research with 28 granted patents during assessment years 2011–2015. Nano-food research focused mainly on nano-food packaging with 76.84% contributions, whereas in nano-agriculture research, focus has been on nano-fertilizers with 90% contributions. Germany, France, Korea, Italy, Czech Republic, Slovenia and Slovak republic have more than 20% of dedicated nanotechnology firms. A growth of about 45% in nano-food patents has been observed for USA during 2011–2015, and China is leading in the nano-agriculture patents with an increase of 60.7% during 2012–2015.     

Validation of plant based bioassays for the toxicity testing of Indian waters

Plant-based bioassays have recently gained remarkable popularity among the toxicological/eco-toxicological assessment procedures. The reasons for their wide use are comparative simplicity, sensitivity, and cost-effectiveness as well as a good correlation with other toxicity tests. The present study describes the use of two plant bioassays, Allium cepa test and seed germination test in the evaluation of the toxicity/genotoxicity of industrial waste water and river water and standardization with the commonly occurring pollutants in Indian waters namely heavy metals and phenolics. Both tests were standardized to suit the Indian conditions, and the local varieties were used. Both bioassays responded significantly with the test range of heavy metals and phenolics. The toxicity of heavy metals was in the order of Cu > Ni > Cd in both the tests whereas 2,4-dinitrophenol was the most toxic among the phenolic compounds. Cabbage, millet, and cucumber, respectively, were found to be the most sensitive in the seed germination test for the test heavy metals and phenols. Significant amounts of chromosomal abnormalities including bridges, stickiness, and fragmentations were recorded with both the industrial waste water and the XAD concentrated river water samples by A. cepa test.     

Effect of calcium against salinity-induced inhibition in growth, ion accumulation and proline contents in Cichorium intybus L

This study assesses the effect of NaCl (80 and 160 mM) and CaCl2 (10 mM) solutions, alone and in combination, to 30-day-old seedlings of Cichorium intybus L. Observations were made at 30 day intervals from the time of treatment till harvest (180 days after sowing). Application of NaCI resulted in significant decreases in lengths of root and stem, in dry weights of root, stem and leaves and in the leaf area, as compared with control. The reduction was less with the combined application of NaCI and CaCI2 than with the NaCI treatment alone. On the contrary treatment of CaCl2, alone promoted the above variables. Proline content in the leaves was enhanced with NaCl and CaCI, alone as well as with the NaCI + CaCI2 treatments; the maximum (six-fold) enhancement was observed with the combined treatments, compared with NaCl (four-fold increase) and CaCl2 (two-fold increase) alone. The sodium (Na+) and Chloride (CI) contents in different plant parts increased both with NaCI and with NaCI+ CaCI2 treatments. The maximum accumulation was observed in leaves, followed by that in stem and root. The potassium (K+) and calcium (Ca2+) contents decreased under NaCl stress, but increased with CaCI2 treatment. Thus, calcium ameliorated the deleterious effects of NaCI stress and stimulated the plant metabolism and growth.     

Using Paleo Reconstructions to Improve Streamflow Forecast Lead Time in the Western United States

In water stressed regions, water managers are exploring new horizons that would help in long‐range streamflow forecasts. Oceanic‐atmospheric oscillations have been shown to influence streamflow variability. In this study, long‐lead time streamflow forecasts are made using a multiclass kernel‐based data‐driven support vector machine (SVM) model. The extended streamflow records based on tree ring reconstructions were used to provide a longer time series data. Reconstructed data were used from 1658 to 1952 and the instrumental record was used from 1953 to 2007. Reconstructions for oceanic‐atmospheric oscillations included the El Niño‐Southern Oscillation, Pacific Decadal Oscillation, Atlantic Multidecadal Oscillation, and North Atlantic Oscillation. Streamflow forecasts using all four oscillations were made with one‐year to five‐year lead times for 21 gages in the western United States. This is the first study that uses both instrumental and reconstructed data of oscillations in SVM model to improve streamflow forecast lead time. SVM model was able to provide “satisfactory” to “very good” forecasts with one‐ to five‐year lead time for the selected gages. The use of all the oscillation indices helped in achieving better predictability compared to using individual oscillations. The SVM modeling results are better when compared with multiple linear regression model forecasts. The findings are statistical in nature and are expected to be useful for long‐term water resources planning and management.     

Evaluating Water Conservation and Reuse Policies Using a Dynamic Water Balance Model

A dynamic water balance model is created to examine the effects of different water conservation policies and recycled water use on water demand and supply in a region faced with water shortages and significant population growth, the Las Vegas Valley (LVV). The model, developed using system dynamics approach, includes an unusual component of the water system, return flow credits, where credits are accrued for returning treated wastewater to the water supply source. In LVV, Lake Mead serves as, both the drinking water source and the receiving body for treated wastewater. LVV has a consumptive use allocation from Lake Mead but return flow credits allow the water agency to pull out additional water equal to the amount returned as treated wastewater. This backdrop results in a scenario in which conservation may cause a decline in the available water supply. Current water use in LVV is 945 lpcd (250 gpcd), which the water agency aims to reduce to 752 lpcd (199 gpcd) by 2035, mainly through water conservation. Different conservation policies focused on indoor and outdoor water use, along with different population growth scenarios, are modeled for their effects on the water demand and supply. Major contribution of this study is in highlighting the importance of outdoor water conservation and the effectiveness of reducing population growth rate in addressing the future water shortages. The water agency target to decrease consumption, if met completely through outdoor conservation, coupled with lower population growth rate, can potentially satisfy the Valley’s water demands through 2035.     

Modeling sediment and nitrogen export from a rural watershed in eastern Canada using the soil and water assessment tool

Watershed simulation models can be used to assess agricultural nonpoint-source pollution and for environmental planning and improvement projects. However, before application of any process-based watershed model, the model performance and reliability must be tested with measured data. The Soil and Water Assessment Tool version 2005 (SWAT2005) was used to model sediment and nitrogen loads from the Thomas Brook Watershed, which drains a 7.84 km rural landscape in the Annapolis Valley of Nova Scotia, Canada. The Thomas Brook SWAT model was comprised of 28 subbasins and 265 hydrologic response units, most of them containing agricultural land use, which is the main nonpoint nitrogen source in the watershed. Crop rotation schedules were incorporated into the model using field data collected within Agriculture and Agri-Food Canada's Watershed Evaluation of Beneficial Management Practices program. Model calibration (2004-2006) and validation (2007-2008) were performed on a monthly basis using continuous stream flow, sediment, and nitrogen export measurements. Model performance was evaluated using the coefficient of determination, Nash-Sutcliff efficiency (NSE), and percent bias (PBIAS) statistics. Study results show that the model performance was satisfactory (NSE > 0.4; > 0.5) for stream flow, sediment, nitrate-nitrogen, and total nitrogen simulations. Annual corn, barley, and wheat yields were also simulated well, with PBIAS values ranging from 0.3 to 7.2%. This evaluation of SWAT demonstrated that the model has the potential to be used as a decision support tool for agricultural watershed management in Nova Scotia.     

Screening and detection of biomarkers in chickpea plants exposed to chromium and cadmium

A broad screening protocol, covering the most general phytochemical groups of compounds, was developed on the basis of high performance thin layer chromatography (HPTLC). A total of six TLC systems, comprising three derivatization reagents, two stationary phases and two mobile phases, were included. The screening method was applied for the identification of biomarkers in the chickpea plant exposed to cadmium and chromium. The biomarkers were selected on the basis of significant changes (0.26-4.6 fold) in concentration levels of phytochemicals. Totally, five different amino acids, three organic acids, one sulphur containing compound and one sugar were identified as biomarkers in chickpea exposed heavy metal.     

Spatial assessment of groundwater quality in Mamundiyar basin, Tamil Nadu, India

Understanding the groundwater quality is important as it is the main factor determining its suitability for drinking, domestic, agricultural, and industrial purposes. In order to assess the groundwater quality, 30 groundwater samples have been collected in year 2008. The water samples collected in the field were analyzed for electrical conductivity, pH, total dissolved solids (TDS), major cations like calcium, magnesium, sodium, potassium, and anions like bicarbonate, carbonate, chloride, nitrate, and sulfate, in the laboratory using the standard methods given by the American Public Health Association. The groundwater locations were selected to cover the entire study area and attention was been given to the area where contamination is expected. The expected groundwater contaminants were chloride, nitrate, TDS, etc. The results were evaluated in accordance with the drinking water quality standards given by the World Health Organization (WHO 1993). To know the distribution pattern of the concentration of different elements and to demarcate the higher concentration zones, the contour maps for various elements were also generated, discussed, and presented.     

Prevalence of heavy metal resistance in bacteria isolated from tannery effluents and affected soil

In the present study, a total of 198 bacteria were isolated, 88 from the tannery effluents and 110 from agricultural soil irrigated with the tannery effluents. Tannery effluents and soils were analyzed for metal concentrations by atomic absorption spectrophotometer. The tannery effluents and soil samples were found to be contaminated with chromium, nickel, zinc, copper, and cadmium. All isolates were tested for their resistance against Cr^6?+?, Cr^3?+?, Ni^2?+?, Zn^2?+?, Cu^2?+?, Cd^2?+?, and Hg^2?+?. From the total of 198 isolates, maximum bacterial isolates were found to be resistant to Cr^6?+? 178 (89.9%) followed by Cr^3?+? 146 (73.7%), Cd^2?+? 86 (43.4%), Zn^2?+? 83 (41.9%), Ni^2?+? 61 (30.8%), and Cu^2?+? 51 (25.6%). However, most of the isolates were sensitive to Hg^2?+?. Among the isolates from tannery effluents, 97.8% were resistant to Cr^6?+? and 64.8% were resistant to Cr^3?+?. Most of the soil isolates were resistant against Cr^6?+? (83.6%) and Cr^3?+? (81.8%). All isolates were categorized into Gram-positive and Gram-negative bacteria. In a total of 114 Gram-positive isolates, 91.2% were resistant to Cr^6?+? followed by 73.7% to Cr^3?+?, 42.1% to Zn^2?+?, 40.4% to Cd^2?+?, and 32.5% to Ni^2?+?. Among Gram-negative isolates, 88.1% were found showing resistance to Cr^6?+?, 75.0% to Cr^3?+?, and 47.6% were resistant to Cd^2?+?. Majority of these metal-resistant isolates were surprisingly found sensitive to the ten commonly used antibiotics. Out of 198 isolates, 114 were found sensitive to all antibiotics whereas only two isolates were resistant to maximum eight antibiotics at a time. Forty-one and 40 isolates which constitute 20.7% and 20.2% were resistant to methicilin and amoxicillin, respectively.     

Assessment of odour problem in sewage-treated effluent in a closed loop irrigation system

Uses of wastewater drives significant economic activity, supports countless livelihoods particularly those for developing countries. While using wastewater, the challenge is to identify practical, affordable safeguards that do not threaten the health of users. In Yanbu Al-Sinaiyah, treated sewage effluent (TSE) is used for landscape purposes. In the present study, the odour problem caused by TSE in community area has been addressed. Samples were collected and analysed for total coliform, odour, trihalomethanes (THMs), total organic carbon (TOC) and other physicochemical parameters. Results show that in distribution network, residual chlorine was below the detection limit, turbidity, THMs, TOC and total coliform concentration was much higher than point source, and concentration of these parameters was further increased in problematic areas. It was also observed that areas with odourous problem were at the tail of irrigation network. This indicates that odour problem was due to less residual chlorine high turbidity, high rate of coliform and TOC. In odourous water samples, carbon disulphide and dimethyl sulphide were also identified by GC/MS, while in other areas where there was no odour, both these compounds were not detected. Odour problem was successfully resolved by improving sand filtration system to minimise turbidity the main cause of odour, increasing the residual chlorine at the treatment plant and regularly flushing the distribution network.