Bioremediation of residual fertilizer nitrate: I. Laboratory demonstration of an on-farm in situ pollution control system

This exploratory laboratory study was undertaken to develop and test an in situ bioremediation system intended to point the way toward a possible field application. The proposed method uses a water table management (WTM) system to deliver nutrients or other amendments to subsoil microorganisms for biostimulation and subsequent biodegradation of pollutants in the saturated and unsaturated zones of the soil. The study was carried out on packed soil columns and bioremediation of residual fertilizer nitrate was attempted. Different levels of organic carbon supplement (glucose C) were introduced into these columns via subirrigation in order to supplement the readily available organic carbon levels in the soil. The study was carried out in two experimental setups. The first setup investigated (i) the effect of addition of a high (970 mg L(-1)) and a low (120 mg L(-1)) glucose C level and (ii) the efficacy of using the subirrigation system as a method for nutrient delivery in bioremediation of leached nitrate. This setup was monitored with time, depth, and with reference to the nitrate residue in the soil solution. Leached nitrate was denitrified to less than 10 mg L(-1) nitrate N at both glucose levels. The second setup investigated the effect of a range of low levels of glucose C on nitrate decontamination, soil pH, and total microbial count in order to find out an optimal glucose C level that reduced the most nitrate and maintained the pH homeostasis of soil.     

Determination of DDT and its metabolites in cattle dip soil available in aqueous phase after remediation

Soil taken from a former cattle tick dip site in NSW Australia, was remediated with a chemical leaching technology. The pre- and post-remediated soil (20g) was dispersed in water (100mL) and subjected to passive diffusion using polymeric membranes. The remediation reduced tDDT from 1174.3 microg/g to 102.9 microg/g (ash weight basis), which was further reduced to 43.2 microg/g with composting. The membranes accumulated 41.3 microg tDDT/g from the dip soil, 49.2 microg tDDT/g from the chemically leached soil and 3.1 microg tDDT/g from the leached composted soil. The chemical leaching removed over 90% of the tDDT, but released soil bound DDT, which was converted to DDE, while 2.99 microg/g was accumulated by the membranes from dip soil, 37.52 microg/g was accumulated from remediated soil. Composting, however, almost eliminated the availability for passive diffusion by the membranes from 50-60 microg/g in remediated soil to 3 -3.5 microg/g in composted soil. Variability studies of the membranes using eight replicates demonstrated that the accumulation by the membranes was reproducible with an average relative error of 20.3% for p,p'-DDT in soil type two, whilst the lowest average relative error for p,p'-DDE was 4.3%, suggesting that triplicate analyses will achieve acceptable accuracy.     

Entomological observations on dengue vector mosquitoes following a suspected outbreak of dengue in certain parts of Nagaland with a note on their susceptibility to insecticides

Three species of Aedes viz., Aedes albopictus, Aedes aegypti and Aedes annandalei were detected from different breeding sources in and around human habitats during entomological study conducted following an outbreak suspected to be of dengue (which occurred during, 1994) in parts of Medziphema PHC area of Nagaland in two different points of time ie., in the year, 1994 and, 2000. The potential dengue vector, Aedes albopictus showed high preponderance by breeding in all types of containers searched with high Breteau Index (BI) value of 85.0 and 72.72 recorded in, 1994 and, 2000 respectively whereas the BI value for other potential vector, Aedes aegypti was recorded low (4.9) in the year, 1994 with a substantial increase (31.81) in, 2000. The change in ecosystem along with the process of urbanization has facilitated the growth of these dengue vector mosquitoes in the area of investigation. Adults of both Aedes aegypti and Aedes albopictus were found to be susceptible to DDT, dieldrin and malathion in insecticide bioassay carried out using WHO test kit.     

Assessment of strontium and calcium levels in Pakistani diet

To cope with nuclear emergency effectively due to ingestion of fission fragment (90)Sr, adequacy of nutritionally and radiologically important elements strontium and calcium was studied in typical Pakistani diet and baseline analytical data were generated. Concentrations of strontium and calcium were measured by using inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and atomic absorption spectrometry (AAS) techniques. Daily dietary intake of strontium and calcium varied from 0.9 to 5.7 mg and 217 to 713 mg with the geometric mean value x geometric standard deviation of 2.6 x 1.7 and 487.1 x 1.4 mg d(-1), respectively. The average Sr concentration in the Pakistani diet was 1.4 times higher while Ca concentration was 0.4 times lower than the recommended values of the International Commission on Radiological Protection (ICRP). The calculated Sr/Ca ratio 5.3E-03 was also higher than the ICRP value. The study depicts that the strontium concentration in the Pakistani diet is adequate, while the calcium concentration is inadequate according to international standards and needs improvement.     

Attributes of occupational injury among workers in the chemical industry and safety issues.

Case-study research was carried out with a view to find the attributes of occupational injury among workers in the chemical industry and to enhance safety issues. Injury data were collected and processed in terms of different variables, such as age, gender, skills, type of hazard, etc. Pareto analysis was then applied to find a pattern of occupational injury among the workers. The study revealed that 79.52% of the injured workers were in the 40-59 age group; 57.14% of accidents occurred during the 1st shift; 73.26% of accidents caused injury to hands, feet, chest to thigh, arms and eyes; and 70.93% of injuries were caused by pumps, carrying and lifting, vehicles, pipelines, valves, and grinding. Surprisingly, no one was injured in the group of temporary workers. The paper also provides specific suggestions followed by some action plans.     

Bioremediation of contaminated soil and sediment by composting

There are many well‐established bioremediation technologies applied commercially at contaminated sites. One such technology is the use of compost material. Composting matrices and composts are rich sources of microorganisms, which can degrade contaminants to innocuous compounds such as carbon dioxide and water. In this article, composting of contaminated soil and sediment was performed on a laboratory bench‐scale pile. Fertilizer was added to increase the nutrient content, and the addition of commercial compost provided a rich source of microorganisms. After maintaining proper composting conditions, the feasibility of composting was assessed by monitoring pH, total volatile solids, total microbial count, temperature, and organic contaminant concentration. The entire composting process occurred over a period of five weeks and resulted in the degradation of contaminants and production of compost with a high nutritional content that could be further used as inocula for the treatment of hazardous waste sites. © 2006 Wiley Periodicals, Inc.     

Determination of human error probabilities for offshore platform musters

The focus of this work is on prediction of human error probabilities during the process of emergency musters on offshore oil and gas production platforms. Due to a lack of human error databases, and in particular human error data for offshore platform musters, an expert judgment technique, the Success Likelihood Index Methodology (SLIM), was adopted as a vehicle to predict human error probabilities. Three muster scenarios of varying severity (man overboard, gas release, and fire and explosion) were studied in detail. A panel of 24 judges active in the offshore oil and gas industry provided data for both the weighting and rating of six performance shaping factors. These data were subsequently processed by means of SLIM to calculate the probability of success for 18 muster actions ranging from point of muster initiator to the final actions in the temporary safe refuge (TSR). The six performance shaping factors considered in this work were stress, complexity, training, experience, event factors and atmospheric factors.     

Real-time response system for the prediction of the atmospheric transport of hazardous materials

Human urge of exploiting earth resources has resulted into unprecedented industrial development in the last century resulting into production of large quantities of hazardous chemicals. Chemical, petrochemical, nuclear, biomedical and pharmaceutical industrial accidents release large quantities of hazardous chemicals into the atmosphere. The accidental discharge during production or storage or transportation have subjected the population to be exposed to exceptionally high concentration levels of hazardous chemicals, taking them by surprise, unprepared with fatal consequences. An emergency planning organization has to be trained to combat this situation in the shortest possible time to minimize the number of causalities. The present paper focuses on computation of dispersion model, using emission source, accident location and online metrological data near to the sources, to provide necessary and accurate results swiftly. The predicted ground level concentrations with the hazardous nature of the chemical, speed and direction of plume, the emergency team will be supplied with all the information in graphical easy to grasp form, superimposed over a GIS map or the latest satellite image of the area.

The emergency team has to be trained for all past scenarios and their preparedness, response and actions must be practiced regularly to be able to abate chemical releases accidentally or intentionally.

Accidental releases of chlorine and ammonia gases in residential and industrial areas are simulated. The predicted ground level concentrations in the effected areas are shown after different time intervals. For low vapor pressure chemical, the dispersion time is large and concentration levels are low but persist for prolonged time while for volatile chemical, the concentrations are high in short time and recovering to safe environment is quick.